Display_D_HP/TeamAAS-VM/Core/Management.cs

using MathNet.Numerics.LinearAlgebra;
using Prism.Events;
using Prism.Ioc;
using Prism.Mvvm;
using Prism.Regions;
using System;
using System.Collections.Generic;
using System.Collections.ObjectModel;
using System.Drawing;
using System.IO;
using System.IO.Compression;
using System.Linq;
using System.Net.Sockets;
using System.Text;
using System.Threading;
using System.Threading.Tasks;
using System.Windows.Media;
using Team.FFFeederService.Interfaces;
using TeamAAS_VP.Core.PLCs;
using TeamAAS_VP.Core.ScrewDriver;
using TeamAAS_VP.Enums;
using TeamAAS_VP.Events;
using TeamAAS_VP.Interfaces;
using TeamAAS_VP.Models;
using TeamAAS_VP.Resources.Languages;
using TouchSocket.Core;
using TouchSocket.SerialPorts;
using TouchSocket.Sockets;

namespace TeamAAS_VP.Core
{
    public class Management : BindableBase
    {
        #region 字段
        IRegionManager _regionManager;
        IEventAggregator _eventAggregator;
        IContainerProvider _container;
        IConfigService _configService;
        IRobotService _robotService;
        ICameraService _cameraService;
        IFeederService _feederService;
        IPlcService _plcService;
        ILightManagerService _lightManagerService;
        IProductService _productService;
        ICalibrationService _calibrationService;
        IRemoteCommandService _remoteCommandService;
        ISystemDatabaseService _systemDatabaseService;
        IMesService _mesService;

        Timer yieldtimer;
        private DateTime StartTime = DateTime.Now;

        // Pressure collection
        /// <summary>
        /// 压力采集信号控制CTS
        /// </summary>
        private CancellationTokenSource[] _pressureCts = new CancellationTokenSource[10];
        /// <summary>
        /// 压力采集超时CTS
        /// </summary>
        private CancellationTokenSource[] _pressureTimeoutCts = new CancellationTokenSource[10];
        /// <summary>
        /// 压力采集CTS
        /// </summary>
        private CancellationTokenSource[] _pressureLinkedCts = new CancellationTokenSource[10];
        /// <summary>
        /// 压力数据集合
        /// </summary>
        private List<(DateTime Timestamp, float Value)>[] _pressureSamples = new List<(DateTime, float)>[10];
        /// <summary>
        /// 采样间隔毫秒
        /// </summary>
        private int _pressureSampleIntervalMs = 50; //采样间隔毫秒
        /// <summary>
        /// 超时自动停止秒数
        /// </summary>
        private int _pressureMaxDurationSeconds = 30; //超时自动停止秒数

        DateTime StartCtqTime = DateTime.Now;//开始采集Ctq数据的时间
        #endregion

        #region 属性

        private ObservableCollection<ShowRender> _Renders;

        /// <summary>
        /// 显示界面
        /// </summary>
        public ObservableCollection<ShowRender> Renders
        {
            get { return _Renders; }
            set { SetProperty(ref _Renders, value); }
        }

        public BgCommunicate BgCommunicate { get; private set; }

        public BgModbusTcpCommunicate BgModbusTcpCommunicate { get; private set; }

        private ObservableCollection<StatusInfo> _Status = new ObservableCollection<StatusInfo>();

        /// <summary>
        /// 状态栏集合
        /// </summary>
        public ObservableCollection<StatusInfo> Status
        {
            get { return _Status; }
            set { SetProperty(ref _Status, value); }
        }

        private Int64 _TotalQuantity;
        /// <summary>
        /// 总产量
        /// </summary>
        public Int64 TotalQuantity
        {
            get { return _TotalQuantity; }
            set { SetProperty(ref _TotalQuantity, value); }
        }

        private Int64 _TotalQuantityToday;
        /// <summary>
        /// 当天的总产量
        /// </summary>
        public Int64 TotalQuantityToday
        {
            get { return _TotalQuantityToday; }
            set { SetProperty(ref _TotalQuantityToday, value); }
        }

        private Int64 _CurrentUPH;
        /// <summary>
        /// 当前的UPH
        /// </summary>
        public Int64 CurrentUPH
        {
            get { return _CurrentUPH; }
            set { SetProperty(ref _CurrentUPH, value); }
        }

        private SerialPortClient _Scan_Client;

        public SerialPortClient Scan_Client
        {
            get { return _Scan_Client; }
            set { _Scan_Client = value; }
        }

        private XYD_ScrewDriver _ScrewDriver;
        public XYD_ScrewDriver ScrewDriver
        {
            get { return _ScrewDriver; }
            set { SetProperty(ref _ScrewDriver, value); }
        }

        public Dictionary<string, object> BackupObject { get; set; } = new Dictionary<string, object>();

        private double _CTtime;
        /// <summary>
        /// ct
        /// </summary>
        public double CTtime
        {
            get { return _CTtime; }
            set { SetProperty(ref _CTtime, value); }
        }

        private ObservableCollection<DataFormCtq> _dfc = new ObservableCollection<DataFormCtq>();
        /// <summary>
        /// CTQ数据集合
        /// </summary>
        public ObservableCollection<DataFormCtq> DFC
        {
            get { return _dfc; }
            set { SetProperty(ref _dfc, value); }
        }
        private Int64 _ThrowNumber;
        /// <summary>
        /// 抛料数
        /// </summary>
        public Int64 ThrowNumber
        {
            get { return _ThrowNumber; }
            set { SetProperty(ref _ThrowNumber, value); }
        }

        private Int64 _NgNumber;
        /// <summary>
        /// ng数量
        /// </summary>
        public Int64 NgNumber
        {
            get { return _NgNumber; }
            set { SetProperty(ref _NgNumber, value); }
        }

        private double _Yield;
        /// <summary>
        /// 良率
        /// </summary>
        public double Yield
        {
            get { return _Yield; }
            set { SetProperty(ref _Yield, value); }
        }

        private ObservableCollection<ProductModel> _ProductList;
        public ObservableCollection<ProductModel> ProductList
        {
            get { return _ProductList; }
            set { SetProperty(ref _ProductList, value); }
        }
        #endregion

        #region 命令

        #endregion

        #region 事件

        #endregion

        public Management(IRegionManager regionManager, IEventAggregator ea, IContainerProvider container, IConfigService configService,
            IRobotService robotService, ICameraService cameraService, IFeederService feederService, IPlcService plcService, IProductService productService,
            ICalibrationService calibrationService, IRemoteCommandService remoteCommandService, ISystemDatabaseService systemDatabaseService, ILightManagerService lightManagerService,
            IMesService mesService)
        {
            _regionManager = regionManager;
            _eventAggregator = ea;
            _container = container;
            _configService = configService;
            _robotService = robotService;
            _cameraService = cameraService;
            _feederService = feederService;
            _plcService = plcService;
            _calibrationService = calibrationService;
            yieldtimer = new Timer(DoYieldTime, null, 10000, 1000);
            Renders = new ObservableCollection<ShowRender>();
            _configService = configService;
            _productService = productService;
            _remoteCommandService = remoteCommandService;
            _systemDatabaseService = systemDatabaseService;
            _lightManagerService = lightManagerService;
            _mesService = mesService;
            InitPressure();
        }

        #region 初始化硬件模块

        /// <summary>
        /// 初始化Feeder
        /// </summary>
        /// <returns></returns>
        public async Task<(bool IsSucceed, string Msg)> InitFeeders()
        {
            var feeders = _configService.GetAllFeeders();
            StringBuilder sb = new StringBuilder();
            foreach (var item in feeders)
            {
                _feederService.CreateFeeder(item.Id, item.FeederNo, item.FeederName, item.IP, item.Port, item.FeederBrand);
                var feeder = _feederService.GetFeeder(item.Id);
                Status.Add(new StatusInfo(item.Id, item.FeederName + $"{Lang.未连接}", new SolidColorBrush(Colors.Red)));
                try
                {
                    feeder.FeederConnectionStatusChanged += Management_FeederConnectionStatusChanged;
                    await feeder.ConnectAsync();     //连接Feeder
                    //SendTaskMessage($"{item.FeederName}已连接!", MessageLevel.Debug);
                }
                catch (Exception ex)
                {
                    sb.AppendLine($"{item.FeederName}:{Lang.断开连接}![{ex.Message}]");
                    SendTaskMessage($"{item.FeederName}{Lang.断开连接}!", MessageLevel.Alarm);
                }
            }
            if (sb.Length == 0)
            {
                return (true, "");
            }
            else
            {
                return (false, sb.ToString());
            }
        }

        /// <summary>
        /// 初始化机器人
        /// </summary>
        /// <returns></returns>
        public async Task<(bool IsSucceed, string Msg)> InitRobots()
        {
            var robots = _configService.GetAllRobots();
            StringBuilder sb = new StringBuilder();
            foreach (var item in robots)
            {
                _robotService.CreateRobot(item.Id, item);

                try
                {
                    Status.Add(new StatusInfo(item.Id, item.RobotName + $"{Lang.未连接}", new SolidColorBrush(Colors.Red)));
                    var robot = _robotService.GetRobot(item.Id);
                    robot.ReceivedEvent += Management_ReceivedEvent;
                    robot.SendEvent += Management_SendEvent;
                    robot.ConnectedEvent += Management_ConnectedEvent;
                    robot.DisconnectedEvent += Management_DisconnectedEvent;
                    await robot.ConnectAsync();     //连接Robot
                    SendTaskMessage($"{item.RobotName}{Lang.已连接}!", MessageLevel.Debug);
                }
                catch (Exception ex)
                {
                    sb.AppendLine($"{item.RobotName}:{Lang.断开连接}![{ex.Message}]");
                    SendTaskMessage($"{item.RobotName}{Lang.断开连接}!", MessageLevel.Alarm);
                }
            }
            if (sb.Length == 0)
            {
                return (true, "");
            }
            else
            {
                return (false, sb.ToString());
            }
        }

        /// <summary>
        /// 初始化PLC
        /// </summary>
        /// <returns></returns>
        public async Task<(bool IsSucceed, string Msg)> InitPlc()
        {
            var plcs = _configService.GetAllPlcs();
            StringBuilder sb = new StringBuilder();
            foreach (var item in plcs)
            {
                try
                {
                    _plcService.CreatePlc(item.Id, item);
                    var plc = _plcService.GetPlc(item.Id);
                    Status.Add(new StatusInfo(item.Id, item.Name + $"{Lang.未连接}", new SolidColorBrush(Colors.Red)));
                    plc.ConnectChangedEvent += Management_PlcConnectChangedEvent;
                    await plc.ConnectAsync();     //连接PLC
                    //SendTaskMessage($"{item.Name}{Lang.已连接}!", MessageLevel.Debug);
                }
                catch (Exception ex)
                {
                    sb.AppendLine($"{item.Name}:{Lang.断开连接}![{ex.Message}]");
                    SendTaskMessage($"{item.Name}{Lang.断开连接}!", MessageLevel.Alarm);
                }
            }
            try
            {
                await WriteSystemParameterToPlcAsync(_configService.GetSystemConfiguration());
                RegisterPlcMonitorAddress();
            }
            catch (Exception ex)
            {
                LogHelper.WriteLogError("为PLC写入系统参数和订阅变量时出错", ex);
            }
            if (sb.Length == 0)
            {
                return (true, "");
            }
            else
            {
                return (false, sb.ToString());
            }
        }

        /// <summary>
        /// 初始化相机
        /// </summary>
        /// <returns></returns>
        public async Task<(bool IsSucceed, string Msg)> InitCameras()
        {
            var cameras = _configService.GetAllCameras();
            StringBuilder sb = new StringBuilder();
            foreach (var item in cameras)
            {

                try
                {
                    //Renders.Add(new ShowRender() { Id = item.Id, CameraName = item.CameraName });
                    _cameraService.CreateCamera(item.Id, item);
                    var camera = _cameraService.GetCamera(item.Id);
                    Status.Add(new StatusInfo(item.Id, item.CameraName + $"{Lang.未连接}", new SolidColorBrush(Colors.Red)));
                    camera.CameraConnectChangedEvent += Management_CameraConnectChangedEvent;
                    try
                    {
                        if (await camera.OpenDeviceAsync())
                        {
                            SendTaskMessage($"{item.CameraName}{Lang.已连接}!", MessageLevel.Debug);
                        }
                        else
                        {
                            SendTaskMessage($"{item.CameraName}{Lang.连接失败}!", MessageLevel.Alarm);
                            sb.AppendLine($"{item.CameraName}:{Lang.连接失败}!");
                        }
                    }
                    catch (Exception ex)
                    {
                        SendTaskMessage($"{item.CameraName}{ex.Message}!", MessageLevel.Alarm);
                        sb.AppendLine($"{item.CameraName}:{ex.Message}!");
                    }

                }
                catch (Exception ex)
                {
                    SendTaskMessage($"{item.CameraName}{Lang.连接失败}!", MessageLevel.Alarm);
                    sb.AppendLine($"{item.CameraName}:{Lang.连接失败}!:{ex.Message}");
                }

            }

            if (sb.Length == 0)
            {
                return (true, "");
            }
            else
            {
                return (false, sb.ToString());
            }
        }

        /// <summary>
        /// 初始化光源控制器
        /// </summary>
        /// <returns></returns>
        public async Task<(bool IsSucceed, string Msg)> InitLightControllers()
        {
            var lightcontrollers = _configService.GetAllLightControllers();
            StringBuilder sb = new StringBuilder();
            foreach (var item in lightcontrollers)
            {
                try
                {
                    var lishtCtr = await _lightManagerService.RegisterControllerAsync(item.Id, item);
                    //var lightcontroller = _cameraService.GetLightController(item.Id);
                    //await lightcontroller.ConnectAsync();     //连接光源控制器
                    //SendTaskMessage($"{item.LightControllerName}{Lang.已连接}!", MessageLevel.Debug);
                }
                catch (Exception ex)
                {
                    //sb.AppendLine($"{item.LightControllerName}:{Lang.断开连接}![{ex.Message}]");
                    //SendTaskMessage($"{item.LightControllerName}{Lang.断开连接}!", MessageLevel.Alarm);
                }
            }
            if (lightcontrollers.Count > 0)
            {
                var result = await _lightManagerService.ConnectAllAsync();
                if (result)
                {
                    return (true, "");
                }
                else
                {
                    return (false, "Light Controller Connect Failed!");
                }
            }
            return (true, "");
            //if (sb.Length == 0)
            //{
            //    return (true, "");
            //}
            //else
            //{
            //    return (false, sb.ToString());
            //}
        }

        /// <summary>
        /// 初始化后台TCP服务器通讯
        /// </summary>
        public void InitBgTcp()
        {
            var config = _configService.GetBgTcp();
            try
            {
                BgCommunicate = new BgCommunicate(config);
                BgCommunicate.ConnectedEvent += BgCommunicate_ConnectedEvent;
                BgCommunicate.DisconnectedEvent += BgCommunicate_DisconnectedEvent;
                BgCommunicate.ReceivedEvent += BgCommunicate_ReceivedEvent;
                BgCommunicate.SendEvent += BgCommunicate_SendEvent;
                BgCommunicate.StartListening();
                SendTaskMessage($"{Lang.已开启监听端口}：{config.Port}", MessageLevel.Debug);
            }
            catch (Exception ex)
            {
                SendTaskMessage($"{Lang.未开启监听端口}：{config.Port}", MessageLevel.Error);
                LogHelper.WriteLogError("开启后台服务器通讯时出错!", ex);
            }
        }

        /// <summary>
        /// 初始化后台ModbusTCP从站
        /// </summary>
        public void InitModbusTcp()
        {
            try
            {
                var config = _configService.GetBgModbusTcp();
                BgModbusTcpCommunicate = new BgModbusTcpCommunicate(config);
                if (config.IsEnabled)
                {
                    BgModbusTcpCommunicate.Listen();
                    SendTaskMessage($"Start Modbus Tcp Slave：{BgModbusTcpCommunicate.IP}:{BgModbusTcpCommunicate.Port}:{BgModbusTcpCommunicate.SlaveID}", MessageLevel.Debug);
                }
            }
            catch (Exception ex)
            {
                SendTaskMessage($"No Start Modbus Tcp Slave：{ex.Message}", MessageLevel.Alarm);
                LogHelper.WriteLogError("开启后台Modbus TCP通讯时出错!", ex);
            }
        }

        /// <summary>
        /// 初始化后台脚本
        /// </summary>
        public void InitBackgroundcript()
        {
            try
            {
                if (!Directory.Exists(FilePath.BackgroundScriptPath))
                {
                    Directory.CreateDirectory(FilePath.BackgroundScriptPath);
                }

                try
                {
                    string[] files = Directory.GetFiles(FilePath.BackgroundScriptPath);
                    List<string> ScriptFilesCollection = new List<string>();
                    foreach (string file in files)
                    {
                        string fileName = Path.GetFileName(file);
                        string fileExtension = Path.GetExtension(file);
                        if (fileExtension == ".cs")
                        {
                            ScriptFilesCollection.Add(file);
                        }
                    }
                    foreach (var item in ScriptFilesCollection)
                    {
                        try
                        {
                            string script = FileHelper.ReadFile(item);
                            SendTaskMessage($"{Lang.执行脚本}:{item}", MessageLevel.Info);
                            Task.Factory.StartNew(() =>
                            {
                                ScriptHelper.ExecuteScriptingAsync(script, _regionManager, _eventAggregator, _container, rst =>
                            {
                                if (!rst.Item1)
                                {
                                    foreach (var err in rst.Item2)
                                    {
                                        SendTaskMessage($"{Lang.后台脚本出错}:{err}", MessageLevel.Error);
                                    }
                                }
                            });
                            });
                        }
                        catch (Exception ex)
                        {
                            LogHelper.WriteLogError($"开启脚本时出错：{item}", ex);
                        }
                    }
                }
                catch (Exception ex)
                {
                    LogHelper.WriteLogError("读取本地脚本文件列表时出错", ex);
                }
            }
            catch (Exception ex)
            {
                LogHelper.WriteLogError("开启后台脚本时出错!", ex);
            }
        }

        /// <summary>
        /// 初始化电批
        /// </summary>
        /// <returns></returns>
        public async Task InitScrewDriver()
        {
            try
            {

                var screwDriverConfig = _configService.GetScrewDriverConfig();
                ScrewDriver = new XYD_ScrewDriver(screwDriverConfig.IPAdress, screwDriverConfig.Port);
                Status.Add(new StatusInfo(ScrewDriver.Id, "电批未连接", new SolidColorBrush(Colors.Red)));
                ScrewDriver.ConnectStateChangedEvent += ScrewDriver_ConnectStateChangedEvent;
                ScrewDriver.SendTimeout = screwDriverConfig.SendTimeout;
                screwDriverConfig.ReceiveTimeout = screwDriverConfig.ReceiveTimeout;
                var isConnected = await ScrewDriver.ConnectAsync();
                if (isConnected)
                {
                    SendTaskMessage($"电批已连接", MessageLevel.Debug);
                }
                else
                {
                    SendTaskMessage($"电批连接失败", MessageLevel.Error);
                }
            }
            catch (Exception ex)
            {
                SendTaskMessage($"电批连接失败:{ex.Message}", MessageLevel.Alarm);
                LogHelper.WriteLogError("连接电批时出错!", ex);
            }
        }

        public async Task InitScan()
        {
            if (!File.Exists(FilePath.ScanRS232ConfigPath))
            {
                var scan = new ScanRs232ConfigModel();
                FileHelper.WriteJsonFile(scan, FilePath.ScanRS232ConfigPath);
            }

            try
            {
                var res = FileHelper.ReadJsonFile<ScanRs232ConfigModel>(FilePath.ScanRS232ConfigPath);
                if (res != null)
                {
                    Scan_Client = new SerialPortClient();
                    Scan_Client.Connecting = (client1, e) => { return EasyTask.CompletedTask; };//即将连接到端口
                    Scan_Client.Connected = (client1, e) => { return EasyTask.CompletedTask; };//成功连接到端口
                    Scan_Client.Closing = (client1, e) => { return EasyTask.CompletedTask; };//即将从端口断开连接。此处仅主动断开才有效。
                    Scan_Client.Closed = (client1, e) => { return EasyTask.CompletedTask; };//从端口断开连接，当连接不成功时不会触发。
                    Scan_Client.Received = async (c, e) =>
                    {
                        //await Console.Out.WriteLineAsync(Encoding.UTF8.GetString(e.ByteBlock.Buffer));
                        await Console.Out.WriteLineAsync(e.ByteBlock.Span.ToString(Encoding.ASCII));
                    };
                    Scan_Client.Received = Scan_DataReceived;

                    await Scan_Client.SetupAsync(new TouchSocketConfig()
                         .SetSerialPortOption(new SerialPortOption()
                         {
                             BaudRate = res.BaudRate,//波特率
                             DataBits = res.DataBits,//数据位
                             Parity = res.Parity,//校验位
                             PortName = res.PortName,//COM
                             StopBits = res.StopBits//停止位
                         })
                         .SetSerialDataHandlingAdapter(() => new PeriodPackageAdapter() { CacheTimeout = TimeSpan.FromMilliseconds(100) })
                         );

                    await Scan_Client.ConnectAsync();

                    if (Scan_Client.Online)
                    {
                        SendTaskMessage($"扫码机已连接", MessageLevel.Debug);
                    }
                    else
                    {
                        SendTaskMessage($"扫码机未连接", MessageLevel.Debug);
                    }
                }
                else
                {
                    SendTaskMessage("请设置扫码机串口！", MessageLevel.Error);
                }
            }
            catch (Exception ex)
            {
                LogHelper.WriteLogError("初始化扫码枪时出错！", ex);
                SendTaskMessage("初始化扫码枪时出错！" + ex.Message, MessageLevel.Error);
            }

        }

        #endregion

        #region 机器人指令执行

        public Dictionary<Guid, CancellationTokenSource> RobotTCPCollection = new Dictionary<Guid, CancellationTokenSource>();
        /// <summary>
        /// 机器人TCP接收
        /// </summary>
        /// <param name="arg1"></param>
        /// <param name="arg2"></param>
        /// <param name="arg3"></param>
        private async void Management_ReceivedEvent(Guid robotid, object arg2, TouchSocket.Sockets.ReceivedDataEventArgs e)
        {
            try
            {
                if (!RobotTCPCollection.ContainsKey(robotid))
                    RobotTCPCollection.Add(robotid, new CancellationTokenSource());
                else
                {
                    if (RobotTCPCollection[robotid].IsCancellationRequested)
                    {
                        RobotTCPCollection[robotid] = new CancellationTokenSource();
                    }
                }
                var robot = await _robotService.GetRobotAsync(robotid);
                //从服务器收到信息。但是一般byteBlock和requestInfo会根据适配器呈现不同的值。
                var buffer = e.ByteBlock.Span.ToString(robot.GetEncoding());
                SendTaskMessage($"{robot.Name}Received:{buffer}", MessageLevel.Info);

                var _ = _remoteCommandService.ExecuteAsync(buffer, RobotTCPCollection[robotid].Token, async msg =>
                {
                    try
                    {
                        if (robot.ConnectType == TCPConnectType.Client)
                        {
                            if (robot.IsConnected)
                            {
                                await robot.SendAsync($"{msg}");
                            }
                        }
                        else
                        {
                            var cient = (ITcpSessionClient)arg2;
                            if (cient.Online)
                            {
                                await robot.SendAsync(cient, $"{msg}");
                            }
                        }
                    }
                    catch (Exception ex)
                    {
                        LogHelper.WriteLogError("TCP发送数据时出错！", ex);
                        SendTaskMessage(ex.Message, MessageLevel.Alarm);
                    }
                });
            }
            catch (Exception ex)
            {
                LogHelper.WriteLogError("处理机器人接收的命令时出错！", ex);
                SendTaskMessage(ex.Message, MessageLevel.Alarm);
            }
        }

        #endregion

        #region 机器人&Feeder&相机连接状态事件
        /// <summary>
        /// 机器人发送事件
        /// </summary>
        /// <param name="arg1"></param>
        /// <param name="arg2"></param>
        /// <param name="arg3"></param>
        /// <exception cref="NotImplementedException"></exception>
        private void Management_SendEvent(Guid robotid, object arg2, string arg3)
        {
            var r = _robotService.GetRobot(robotid);
            SendTaskMessage($"{r.Name}Send:{arg3}", MessageLevel.Info);
        }

        /// <summary>
        /// 机器人断开连接时
        /// </summary>
        /// <param name="arg1"></param>
        /// <param name="arg2"></param>
        /// <param name="arg3"></param>
        /// <exception cref="NotImplementedException"></exception>
        private void Management_DisconnectedEvent(Guid robotid, object arg2, ClosedEventArgs arg3)
        {
            if (RobotTCPCollection.ContainsKey(robotid))
            {
                RobotTCPCollection[robotid].Cancel();
            }
            var r = _configService.GetRobot(robotid);
            if (r.ConnectType == TCPConnectType.Server)
            {
                ITcpSessionClient socketClient = arg2 as ITcpSessionClient;
                SendTaskMessage($"{r.RobotName}[{socketClient.Id}:{socketClient.IP}]{Lang.断开连接}！", MessageLevel.Error);

                var robot = _robotService.GetRobot(robotid);
                if (robot.TcpService.Count < 1)
                {
                    var sta = Status.FirstOrDefault(s => s.ID == robotid);
                    App.Current.Dispatcher.Invoke(new
                         Action(() =>
                         {
                             sta.Message = $"{r.RobotName}{Lang.未连接}";
                             sta.Background = new SolidColorBrush(Colors.Red);
                         }));

                }
            }
            else
            {
                SendTaskMessage($"{r.RobotName}{Lang.断开连接}！", MessageLevel.Error);
                var sta = Status.FirstOrDefault(s => s.ID == robotid);
                App.Current.Dispatcher.Invoke(new
                         Action(() =>
                         {
                             sta.Message = $"{r.RobotName}{Lang.断开连接}";
                             sta.Background = new SolidColorBrush(Colors.Red);
                         }));

            }
        }

        /// <summary>
        /// 机器人连接成功时
        /// </summary>
        /// <param name="arg1"></param>
        /// <param name="arg2"></param>
        /// <param name="arg3"></param>
        /// <exception cref="NotImplementedException"></exception>
        private void Management_ConnectedEvent(Guid robotid, object arg2, ConnectedEventArgs arg3)
        {
            var r = _configService.GetRobot(robotid);
            if (r.ConnectType == TCPConnectType.Server)
            {
                ITcpSessionClient socketClient = arg2 as ITcpSessionClient;
                SendTaskMessage($"{r.RobotName}[{socketClient.Id}:{socketClient.IP}]{Lang.已连接}！", MessageLevel.Debug);

                var robot = _robotService.GetRobot(robotid);
                if (robot.TcpService.Count > 0)
                {
                    var sta = Status.FirstOrDefault(s => s.ID == robotid);
                    App.Current.Dispatcher.Invoke(new
                         Action(() =>
                         {
                             sta.Message = $"{r.RobotName}{Lang.已连接}";
                             sta.Background = new SolidColorBrush(Colors.Green);
                         }));

                }
            }
            else
            {
                SendTaskMessage($"{r.RobotName}{Lang.已连接}！", MessageLevel.Debug);
                var sta = Status.FirstOrDefault(s => s.ID == robotid);
                App.Current.Dispatcher.Invoke(new
                         Action(() =>
                         {
                             sta.Message = $"{r.RobotName}{Lang.已连接}";
                             sta.Background = new SolidColorBrush(Colors.Green);
                         }));

            }
        }

        /// <summary>
        /// Feeder连接状态改变时
        /// </summary>
        /// <param name="sender"></param>
        /// <param name="state"></param>
        private void Management_FeederConnectionStatusChanged(object sender, bool state)
        {
            IFeeder feeder = sender as IFeeder;
            var sta = Status.FirstOrDefault(s => s.ID == feeder.Id);
            if (state)
            {
                App.Current.Dispatcher.Invoke(new
                         Action(() =>
                         {
                             sta.Message = $"{feeder.Name}{Lang.已连接}";
                             sta.Background = new SolidColorBrush(Colors.Green);
                         }));

                SendTaskMessage($"{feeder.Name}{Lang.已连接}！", MessageLevel.Debug);
            }
            else
            {
                App.Current.Dispatcher.Invoke(new
                         Action(() =>
                         {
                             sta.Message = $"{feeder.Name}{Lang.未连接}";
                             sta.Background = new SolidColorBrush(Colors.Red);
                         }));

                SendTaskMessage($"{feeder.Name}{Lang.断开连接}！", MessageLevel.Error);
            }
        }

        /// <summary>
        /// 相机连接或者断开时
        /// </summary>
        /// <param name="id"></param>
        /// <param name="state"></param>
        private void Management_CameraConnectChangedEvent(Guid id, bool state)
        {
            var sta = Status.FirstOrDefault(s => s.ID == id);
            var camera = _configService.GetCamera(id);
            if (sta != null && camera != null)
            {
                if (state)
                {
                    App.Current.Dispatcher.Invoke(new Action(() =>
                    {
                        sta.Message = $"{camera.CameraName}{Lang.已连接}";
                        sta.Background = new SolidColorBrush(Colors.Green);
                    }));

                }
                else
                {
                    App.Current.Dispatcher.Invoke(new Action(() =>
                    {
                        sta.Message = $"{camera.CameraName}{Lang.断开连接}";
                        sta.Background = new SolidColorBrush(Colors.Red);
                    }));
                }
            }
        }

        /// <summary>
        /// PLC连接状态改变事件
        /// </summary>
        /// <param name="plc"></param>
        /// <param name="isconnected"></param>
        private async void Management_PlcConnectChangedEvent(object sender, bool isconnected)
        {
            IPlc plc = sender as IPlc;
            var sta = Status.FirstOrDefault(s => s.ID == plc.Id);
            if (plc.IsConnected)
            {
                SendTaskMessage($"{plc.Name}{Lang.已连接}！", MessageLevel.Debug);
                if (sta == null) return;
                App.Current.Dispatcher.Invoke(new
                         Action(() =>
                         {
                             sta.Message = $"{plc.Name}{Lang.已连接}";
                             sta.Background = new SolidColorBrush(Colors.Green);
                         }));
                try
                {
                    await WriteSystemParameterToPlcAsync(_configService.GetSystemConfiguration());
                    await WritePositionToPlcAsync();
                }
                catch (Exception ex)
                {
                    LogHelper.WriteLogError("PLC连接成功时，写入系统参数和点位信息时出错！", ex);
                }
            }
            else
            {
                SendTaskMessage($"{plc.Name}{Lang.断开连接}！", MessageLevel.Error);
                if (sta == null) return;
                App.Current.Dispatcher.Invoke(new
                         Action(() =>
                         {
                             sta.Message = $"{plc.Name}{Lang.未连接}";
                             sta.Background = new SolidColorBrush(Colors.Red);
                         }));
            }
        }

        /// <summary>
        /// 电批连接状态改变时
        /// </summary>
        /// <param name="screwDevice"></param>
        /// <param name="state"></param>
        private void ScrewDriver_ConnectStateChangedEvent(object screwDevice, bool state)
        {
            try
            {
                XYD_ScrewDriver screwDriver = screwDevice as XYD_ScrewDriver;
                if (state)
                {
                    SendTaskMessage($"电批{Lang.已连接}！", MessageLevel.Debug);
                    var sta = Status.FirstOrDefault(s => s.ID == screwDriver.Id);
                    App.Current.Dispatcher.Invoke(new
                         Action(() =>
                         {
                             sta.Message = $"电批{Lang.已连接}";
                             sta.Background = new SolidColorBrush(Colors.Green);
                         }));
                }
                else
                {
                    SendTaskMessage($"电批{Lang.未连接}！", MessageLevel.Error);
                    var sta = Status.FirstOrDefault(s => s.ID == screwDriver.Id);
                    App.Current.Dispatcher.Invoke(new
                         Action(() =>
                         {
                             sta.Message = $"电批{Lang.未连接}";
                             sta.Background = new SolidColorBrush(Colors.Red);
                         }));
                }
            }
            catch (Exception ex)
            {
                LogHelper.WriteLogError("电批连接状态改变时出错了", ex);
            }
        }
        #endregion

        #region 后台服务器通讯事件
        private void BgCommunicate_SendEvent(ITcpSessionClient client, string msg)
        {
            SendTaskMessage($"{Lang.服务器}[{client.ServicePort}] Send To {Lang.客户端}[{client.Id}:{client.IP}]:{msg}", MessageLevel.Info);
        }

        public Dictionary<string, CancellationTokenSource> BgCommunicateollection = new Dictionary<string, CancellationTokenSource>();
        private async void BgCommunicate_ReceivedEvent(ITcpSessionClient client, string msg)
        {

            try
            {
                if (!BgCommunicateollection.ContainsKey(client.Id))
                {
                    BgCommunicateollection.Add(client.Id, new CancellationTokenSource());
                }

                SendTaskMessage($"{Lang.服务器}[{client.ServicePort}]ReceiveFor{Lang.客户端}[{client.Id}:{client.IP}]:{msg}", MessageLevel.Info);
                var _ = _remoteCommandService.ExecuteAsync(msg, BgCommunicateollection[client.Id].Token, async response =>
                {
                    try
                    {
                        if (!client.Online)
                        {
                            return;
                        }
                        await BgCommunicate.SendAsync(client, $"{response}");
                    }
                    catch (Exception ex)
                    {
                        LogHelper.WriteLogError("后台TCP发送数据时出错！", ex);
                        SendTaskMessage(ex.Message, MessageLevel.Alarm);
                    }
                });
            }
            catch (Exception ex)
            {
                LogHelper.WriteLogError("处理后台服务器接收的命令时出错！", ex);
                SendTaskMessage(ex.Message, MessageLevel.Alarm);
            }
        }

        private void BgCommunicate_DisconnectedEvent(ITcpSessionClient client, ClosedEventArgs e)
        {
            SendTaskMessage($"{Lang.服务器}[{client.ServicePort}]{Lang.客户端}[{client.Id}:{client.IP}]{Lang.断开连接}!", MessageLevel.Alarm);
            if (BgCommunicateollection.ContainsKey(client.Id))
            {
                BgCommunicateollection[client.Id].Cancel();
            }
        }

        private void BgCommunicate_ConnectedEvent(ITcpSessionClient client, ConnectedEventArgs e)
        {
            SendTaskMessage($"{Lang.服务器}[{client.ServicePort}]{Lang.客户端}[{client.Id}:{client.IP}]{Lang.连接成功}!", MessageLevel.Debug);
        }

        private async Task Scan_DataReceived(ISerialPortClient client, ReceivedDataEventArgs e)
        {
            try
            {
                string poname = client.MainSerialPort.PortName;
                string data = e.ByteBlock.Span.ToString(Encoding.ASCII);
                await Console.Out.WriteLineAsync(data);
                string response = data.Split('\r')[0];
                SendTaskMessage($"扫码机:{poname}Receive:{response}", MessageLevel.Info);
                ScanValue = response;
                _scanDoneEvent.Set();
            }
            catch (Exception ex)
            {
                LogHelper.WriteLogError("扭力测量仪接收信息时出错！", ex);
                SendTaskMessage("扭力测量仪接收信息时出错！" + ex.Message, MessageLevel.Error);
            }
        }

        #endregion

        #region PLC
        /// <summary>
        /// 将系统参数写入PLC
        /// </summary>
        /// <param name="systemConfiguration"></param>
        /// <returns></returns>
        public async Task WriteSystemParameterToPlcAsync(SystemConfiguration systemConfiguration)
        {
            var addressConfig = _configService.GetPlcAddresses();
            var plc = _plcService.GetPlcByNumber(addressConfig.PlcNo) as OpcUaClientPLC;
            if (plc == null || !plc.IsConnected) return;
            Dictionary<string, object> nodeValues = new Dictionary<string, object>();
            nodeValues.Add(addressConfig.Out_WorkMode.Address, (Int16)systemConfiguration.WorkMode);
            nodeValues.Add(addressConfig.Out_PickPointNum.Address, (Int16)systemConfiguration.PickPointNum);
            nodeValues.Add(addressConfig.Out_DowmCameraNum.Address, (Int16)systemConfiguration.DowmCameraNum);
            nodeValues.Add(addressConfig.Out_UpCameraPickNum.Address, (Int16)systemConfiguration.UpCameraPickNum);
            nodeValues.Add(addressConfig.Out_UpCameraPutNum.Address, (Int16)systemConfiguration.UpCameraPutNum);
            nodeValues.Add(addressConfig.Out_UPCameracheckNum.Address, (Int16)systemConfiguration.UPCameracheckNum);
            nodeValues.Add(addressConfig.Out_FixedCameraPickNum.Address, (Int16)systemConfiguration.FixedCameraPickNum);
            nodeValues.Add(addressConfig.Out_FixedCameraPutNum.Address, (Int16)systemConfiguration.FixedCameraPutNum);
            nodeValues.Add(addressConfig.Out_FixedCameracheckNum.Address, (Int16)systemConfiguration.FixedCameracheckNum);
            nodeValues.Add(addressConfig.Out_ScrewTeachNum.Address, (Int16)systemConfiguration.ScrewTeachNum);

            var res = await plc.WriteNodesAsync(nodeValues);
        }

        /// <summary>
        /// 注册需要监控的PLC地址
        /// </summary>
        public void RegisterPlcMonitorAddress()
        {
            var addressConfig = _configService.GetPlcAddresses();
            var plc = _plcService.GetPlcByNumber(addressConfig.PlcNo) as OpcUaClientPLC;
            if (plc == null || !plc.IsConnected) return;

            //PLC地址数组
            List<string> monitorNodeIds = new List<string>()
            {
                addressConfig.In_DowmCameraExe.Address,
                addressConfig.In_UpCameraPickExe.Address,
                addressConfig.In_UpCameraPutExe.Address,
                addressConfig.In_UPCameracheckExe.Address,
                addressConfig.In_FixedCameraPickExe.Address,
                addressConfig.In_FixedCameraPutExe.Address,
                addressConfig.In_FixedCameracheckExe.Address,
                addressConfig.In_RequestPosition.Address,
                addressConfig.In_ScrewTeachExe.Address,
                addressConfig.In_PickINC.Address,
                 addressConfig.In_Throw.Address,
            };
            for (int i = 0; i < 10; i++)
            {
                monitorNodeIds.Add(string.Format(addressConfig.In_MesCheck.Address, i));
            }
            for (int i = 0; i < 7; i++)
            {
                monitorNodeIds.Add(string.Format(addressConfig.In_WorkStart.Address, i));
                monitorNodeIds.Add(string.Format(addressConfig.In_WorkDone.Address, i));
            }
            //订阅PLC地址变化
            plc.SubscribeNodes("AutoSensor", monitorNodeIds, PlcCommandTrigger);
        }

        /// <summary>
        /// 写入点位信息给PLC
        /// </summary>
        /// <returns></returns>
        public async Task WritePositionToPlcAsync()
        {
            var addressConfig = _configService.GetPlcAddresses();
            var plc = _plcService.GetPlcByNumber(addressConfig.PlcNo) as OpcUaClientPLC;
            if (plc == null || !plc.IsConnected) return;
            var current = _productService.GetCurrentProduct();
            if (current == null) return;
            if (current.PickCameraPoints != null && current.PickCameraPoints.Count > 0)
            {
                foreach (var item in current.PickCameraPoints)
                {
                    await item.WriteToPlcAddress(addressConfig.Out_PickCamera, plc);
                }
            }

            if (current.PickPoints != null && current.PickPoints.Count > 0)
            {
                foreach (var item in current.PickPoints)
                {
                    var res = await item.WriteToPlcAddress(addressConfig.Out_Pick, plc);
                }
            }
            if (current.SecPosCameraPoints != null && current.SecPosCameraPoints.Count > 0)
            {
                foreach (var item in current.SecPosCameraPoints)
                {
                    await item.WriteToPlcAddress(addressConfig.Out_SecPosCamera, plc);
                }
            }
            if (current.ScrewCameraPoints != null && current.ScrewCameraPoints.Count > 0)
            {
                foreach (var item in current.ScrewCameraPoints)
                {
                    await item.WriteToPlcAddress(addressConfig.Out_ScrewCamera, plc);
                }
            }
            if (current.ScrewPoints != null && current.ScrewPoints.Count > 0)
            {
                foreach (var item in current.ScrewPoints)
                {
                    await item.WriteToPlcAddressEx(addressConfig.Out_Screw, plc);
                }
                await plc.WriteNodeAsync(addressConfig.Out_WorkNum.Address, (Int16)current.ScrewPoints.Count);
            }
            if (current.CheckCameraPoints != null && current.CheckCameraPoints.Count > 0)
            {
                foreach (var item in current.CheckCameraPoints)
                {
                    await item.WriteToPlcAddress(addressConfig.Out_CheckCamera, plc);
                }
            }
            if (current.RemovePoints != null && current.RemovePoints.Count > 0)
            {
                foreach (var item in current.RemovePoints)
                {
                    await item.WriteToPlcAddress(addressConfig.Out_RemovePos, plc);
                }
            }
            if (current.PressurePlacePoints != null && current.PressurePlacePoints.Count > 0)
            {
                foreach (var item in current.PressurePlacePoints)
                {
                    await item.WriteToPlcAddress(addressConfig.Out_PressurePlace, plc);
                }
            }
        }

        public async Task WriteParameterToPlcAsync()
        {
            var addressConfig = _configService.GetPlcAddresses();
            var plc = _plcService.GetPlcByNumber(addressConfig.PlcNo) as OpcUaClientPLC;
            if (plc == null || !plc.IsConnected) return;
            // 获取当前产品
            var currentProduct = _productService.GetCurrentProduct();
            if (currentProduct == null) return;
            try
            {
                if (currentProduct.GlobalParamEx == null) currentProduct.GlobalParamEx = new Models.Product.ProductGlobalParamEx();
                if (currentProduct.GlobalParamEx.DownPressure == null) currentProduct.GlobalParamEx.DownPressure = new PressureModel();
                await plc.WriteNodeAsync(addressConfig.Down_Time.Address, currentProduct.GlobalParamEx.DownPressure.PressureTime);
                await plc.WriteNodeAsync(addressConfig.Down_WetOut_Num.Address, currentProduct.GlobalParamEx.DownPressure.PressureNum);
                await plc.WriteNodeAsync(addressConfig.Down_WetOut_Num_max.Address, currentProduct.GlobalParamEx.DownPressure.PressureNumMax);
            }
            catch (Exception)
            {

            }

        }

        /// <summary>
        /// 固定向上相机拍照结果
        /// </summary>
        OpenCvSharp.Point3f[] DowmCameraResults = new OpenCvSharp.Point3f[10];
        /// <summary>
        /// 移动向下相机拍照结果
        /// </summary>
        OpenCvSharp.Point3f[] UpCameraPutResults = new OpenCvSharp.Point3f[10];
        /// <summary>
        /// 取料移动相机拍照结果
        /// </summary>
        OpenCvSharp.Point3f UpCameraPickResult = new OpenCvSharp.Point3f();
        /// <summary>
        /// 最终组装位置
        /// </summary>
        OpenCvSharp.Point3f PlaceActualCoord = new OpenCvSharp.Point3f();
        /// <summary>
        /// 零件SN
        /// </summary>
        string PartSN = "";
        /// <summary>
        /// 产品SN
        /// </summary>
        string[] ProductMainSN = new string[10];//产品主sn
        /// <summary>
        /// 工单信息
        /// </summary>
        string[] wo = new string[10];

        string[] model_num = new string[10];//产品model_num
        string[] color = new string[10];//产品color
        /// <summary>
        /// 二次定位相机的工具坐标
        /// </summary>
        PointF DownTool = new PointF();
        double _FixedUpCameraAngle = 0;
        double _MoveCameraAngle = 0;
        // 扫码完成事件
        private readonly ManualResetEventSlim _scanDoneEvent = new ManualResetEventSlim(false);
        // 扫码结果
        private string ScanValue = "";
        bool _LastDowmCameraExe = false;
        bool _LastScrewTeachExe = false;
        bool _LastUpCameraPickExe = false;
        bool _LastUpCameraPutExe = false;
        bool _LastUPCameracheckExe = false;
        bool _LastFixedCameraPickExe = false;
        bool _LastFixedCameraPutExe = false;
        bool _LastFixedCameracheckExe = false;
        bool _LastThrowExe = false;
        Int16 _LastQrCodePhotoRequest = 0;
        Int16[] _LastWorkStart = new Int16[7];
        Int16[] _LastWorkDone = new Int16[7];
        Int16 _LastRequestPosition = 0;
        Int16 _LastPickINC = 0;
        Int16[] _LastMesCheck = new Int16[10];
        DateTime[] _LastMesCheckTime = new DateTime[10];
        Dictionary<string, string> mes_cc { get; set; } = new Dictionary<string, string>();
        /// <summary>
        /// 当前压力值
        /// </summary>
        double[] currentPressure = new double[10];

        /// <summary>
        /// PLC命令触发时
        /// </summary>
        /// <param name="tuple"></param>
        private async void PlcCommandTrigger((string key, string nodeId, object value) tuple)
        {
            try
            {
                if (tuple.key != "AutoSensor")
                {
                    return;
                }

                var addressConfig = _configService.GetPlcAddresses();
                var plc = _plcService.GetPlcByNumber(addressConfig.PlcNo) as OpcUaClientPLC;
                if (plc == null || !plc.IsConnected) return;
                // 获取当前产品
                var currentProduct = _productService.GetCurrentProduct();
                if (currentProduct == null)
                {
                    return;
                }

                ////获取产品编码
                //_productService.CurrentProductCode = plc.ReadNode<string>(string.Format(addressConfig.In_Code.Address, 0));
                ////如果产品编码为空，则以当前的时间戳作为编码
                //if (string.IsNullOrEmpty(_productService.CurrentProductCode))
                //{
                //    _productService.CurrentProductCode = DateTime.Now.ToString("yyyyMMddHHmmssfff");
                //}

                bool isDryMode = plc.ReadNode<bool>(addressConfig.In_DryMode.Address);

                // 触发下相机拍照
                if (addressConfig.In_DowmCameraExe.Address.Contains(tuple.nodeId))
                {
                    if (tuple.value is bool state)
                    {
                        if (_LastDowmCameraExe != state)
                        {
                            _LastDowmCameraExe = state;
                        }
                        else
                        {
                            return;
                        }
                        if (state)
                        {
                            SendTaskMessage($"触发下相机拍照...", MessageLevel.Debug);
                            //相机的编号
                            Int16 cameraIndex = plc.ReadNode<Int16>(addressConfig.In_DowmCameraNum.Address);
                            SendTaskMessage($"编号：{cameraIndex}", MessageLevel.Info);

                            // 获取机器人当前坐标
                            var robot = _robotService.GetAllRobots().FirstOrDefault();
                            if (robot == null)
                            {
                                SendTaskMessage($"未找到机器人，无法执行上相机锁附/组装拍照视觉任务", MessageLevel.Alarm);
                                await plc.WriteNodeAsync(addressConfig.Out_DownCameraStatus.Address, (Int16)2);
                                return;

                            }
                            var currentPosition = robot.GetRobotPos();

                            //如果下相机拍照的次数是1，则判断用时拍照的相机是几个
                            int downCameraNum = _configService.GetSystemConfiguration().DowmCameraNum;
                            if (downCameraNum == 1)
                            {
                                //如果下相机2的流程id为空，则表示只有一个下相机
                                if (currentProduct.FixedUpCamera2ProcedureId == Guid.Empty)
                                {
                                    //获取固定向上相机1的流程
                                    var process = _productService.GetCurrentProductProcedureModelById(currentProduct.FixedUpCamera1ProcedureId);
                                    if (process == null)
                                    {
                                        SendTaskMessage($"固定向上相机1视觉流程，流程ID：{currentProduct.FixedUpCamera1ProcedureId}", MessageLevel.Alarm);
                                        await plc.WriteNodeAsync(addressConfig.Out_DownCameraStatus.Address, (Int16)2);
                                        return;
                                    }
                                    // 执行视觉任务
                                    var _cts = new CancellationTokenSource();
                                    var visionResult = await _remoteCommandService.ExecutePhotoGetSinglePoint(process, null, new double[] { currentPosition.X, currentPosition.Y, currentPosition.U }, _cts.Token, cameraIndex, null);
                                    if (isDryMode)
                                    {
                                        await plc.WriteNodeAsync(addressConfig.Out_DownCameraStatus.Address, (Int16)1);
                                        return;
                                    }
                                    if (visionResult.IsSucceed)
                                    {
                                        float toolX = (float)(visionResult.X - currentPosition.X);
                                        float toolY = (float)(visionResult.Y - currentPosition.Y);

                                        DowmCameraResults[cameraIndex] = new OpenCvSharp.Point3f(toolX, toolY, (float)visionResult.U);
                                        DownTool = new PointF(toolX, toolY);
                                        await plc.WriteNodeAsync(addressConfig.Out_DownCameraStatus.Address, (Int16)1);
                                        return;
                                    }
                                    else
                                    {
                                        await plc.WriteNodeAsync(addressConfig.Out_DownCameraStatus.Address, (Int16)2);
                                        return;
                                    }
                                }
                                else
                                {
                                    //获取固定向上相机1的流程
                                    var process1 = _productService.GetCurrentProductProcedureModelById(currentProduct.FixedUpCamera1ProcedureId);
                                    if (process1 == null)
                                    {
                                        SendTaskMessage($"固定向上相机1视觉流程，流程ID：{currentProduct.FixedUpCamera1ProcedureId}", MessageLevel.Alarm);
                                        await plc.WriteNodeAsync(addressConfig.Out_DownCameraStatus.Address, (Int16)2);
                                        return;
                                    }
                                    //获取固定向上相机2的流程
                                    var process2 = _productService.GetCurrentProductProcedureModelById(currentProduct.FixedUpCamera2ProcedureId);
                                    if (process2 == null)
                                    {
                                        SendTaskMessage($"固定向上相机1视觉流程，流程ID：{currentProduct.FixedUpCamera2ProcedureId}", MessageLevel.Alarm);
                                        await plc.WriteNodeAsync(addressConfig.Out_DownCameraStatus.Address, (Int16)2);
                                        return;
                                    }
                                    // 执行视觉任务
                                    var _cts = new CancellationTokenSource();
                                    var task1 = _remoteCommandService.ExecutePhotoGetSinglePoint(process1, null, new double[] { currentPosition.X, currentPosition.Y, currentPosition.U }, _cts.Token, 1, null);
                                    var task2 = _remoteCommandService.ExecutePhotoGetSinglePoint(process2, null, new double[] { currentPosition.X, currentPosition.Y, currentPosition.U }, _cts.Token, 2, null);
                                    var visionResults = await Task.WhenAll(task1, task2);
                                    if (isDryMode)
                                    {
                                        await plc.WriteNodeAsync(addressConfig.Out_DownCameraStatus.Address, (Int16)1);
                                        return;
                                    }
                                    if (visionResults[0].IsSucceed && visionResults[1].IsSucceed)
                                    {
                                        float toolX = (float)(visionResults[0].X + visionResults[1].X) / 2;
                                        float toolY = (float)(visionResults[0].Y + visionResults[1].Y) / 2;
                                        _FixedUpCameraAngle = Common.CalculateAngleBetweenPointsDegrees(new PointF((float)visionResults[0].X, (float)visionResults[0].Y), new PointF((float)visionResults[1].X, (float)visionResults[1].Y));
                                        DowmCameraResults[cameraIndex] = new OpenCvSharp.Point3f(toolX, toolY, (float)_FixedUpCameraAngle);
                                        DownTool = new PointF(toolX, toolY);
                                        SendTaskMessage($"固定向上相机拍照Tool: {DownTool.X:F3},{DownTool.Y:F3},{_FixedUpCameraAngle:F3}", MessageLevel.Info);
                                        await plc.WriteNodeAsync(addressConfig.Out_DownCameraStatus.Address, (Int16)1);
                                        return;
                                    }
                                    else
                                    {
                                        await plc.WriteNodeAsync(addressConfig.Out_DownCameraStatus.Address, (Int16)2);
                                        return;

                                    }

                                }
                            }
                            else if (downCameraNum == 2)
                            {
                                //如果下相机2的流程id为空，则表示只有一个下相机
                                if (currentProduct.FixedUpCamera2ProcedureId == Guid.Empty)
                                {
                                    //获取固定向上相机1的流程
                                    //var process = _productService.GetCurrentProductProcedureModelById(currentProduct.FixedUpCamera1ProcedureId);
                                    //if (process == null)
                                    //{
                                    //    SendTaskMessage($"固定向上相机1视觉流程，流程ID：{currentProduct.FixedUpCamera1ProcedureId}", MessageLevel.Alarm);
                                    //    await plc.WriteNodeAsync(addressConfig.Out_DownCameraStatus.Address, (Int16)2);
                                    //    return;
                                    //}
                                    //// 执行视觉任务
                                    //var _cts = new CancellationTokenSource();
                                    //var visionResult = await _remoteCommandService.ExecutePhotoGetSinglePoint(process, null, new double[] { currentPosition.X, currentPosition.Y, currentPosition.U }, _cts.Token);
                                    //if (visionResult.IsSucceed)
                                    //{
                                    //    float toolX = (float)(visionResult.X - currentPosition.X);
                                    //    float toolY = (float)(visionResult.Y - currentPosition.Y);

                                    //    DowmCameraResults[cameraIndex] = new PointF(toolX, toolX);

                                    //    if (cameraIndex == downCameraNum)
                                    //    {
                                    //        //求取多个DowmCameraResults的中心点


                                    //        DownTool = new PointF(toolX, toolX);
                                    //    }

                                    //    await plc.WriteNodeAsync(addressConfig.Out_DownCameraStatus.Address, (Int16)1);
                                    //    return;
                                    //}
                                    //else
                                    //{
                                    //    await plc.WriteNodeAsync(addressConfig.Out_DownCameraStatus.Address, (Int16)2);
                                    //    return;
                                    //}

                                    //暂时没有应用场景，不支持
                                    await plc.WriteNodeAsync(addressConfig.Out_DownCameraStatus.Address, (Int16)2);
                                    return;
                                }
                                else
                                {
                                    //获取固定向上相机1的流程
                                    var process1 = _productService.GetCurrentProductProcedureModelById(currentProduct.FixedUpCamera1ProcedureId);
                                    if (process1 == null)
                                    {
                                        SendTaskMessage($"固定向上相机1视觉流程，流程ID：{currentProduct.FixedUpCamera1ProcedureId}", MessageLevel.Alarm);
                                        await plc.WriteNodeAsync(addressConfig.Out_DownCameraStatus.Address, (Int16)2);
                                        return;
                                    }
                                    //获取固定向上相机2的流程
                                    var process2 = _productService.GetCurrentProductProcedureModelById(currentProduct.FixedUpCamera2ProcedureId);
                                    if (process2 == null)
                                    {
                                        SendTaskMessage($"固定向上相机1视觉流程，流程ID：{currentProduct.FixedUpCamera2ProcedureId}", MessageLevel.Alarm);
                                        await plc.WriteNodeAsync(addressConfig.Out_DownCameraStatus.Address, (Int16)2);
                                        return;
                                    }
                                    // 执行视觉任务
                                    var _cts = new CancellationTokenSource();
                                    var task1 = _remoteCommandService.ExecutePhotoGetSinglePoint(process1, null, new double[] { currentPosition.X, currentPosition.Y, currentPosition.U }, _cts.Token, 1, null);
                                    var task2 = _remoteCommandService.ExecutePhotoGetSinglePoint(process2, null, new double[] { currentPosition.X, currentPosition.Y, currentPosition.U }, _cts.Token, 2, null);
                                    var visionResults = await Task.WhenAll(task1, task2);
                                    if (isDryMode)
                                    {
                                        await plc.WriteNodeAsync(addressConfig.Out_DownCameraStatus.Address, (Int16)1);
                                        return;
                                    }
                                    if (visionResults[0].IsSucceed && visionResults[1].IsSucceed)
                                    {
                                        float toolX = (float)(visionResults[0].X + visionResults[1].X) / 2;
                                        float toolY = (float)(visionResults[0].Y + visionResults[1].Y) / 2;
                                        _FixedUpCameraAngle = Common.CalculateAngleBetweenPointsDegrees(new PointF((float)visionResults[0].X, (float)visionResults[0].Y), new PointF((float)visionResults[1].X, (float)visionResults[1].Y));
                                        DowmCameraResults[cameraIndex] = new OpenCvSharp.Point3f(toolX, toolY, (float)_FixedUpCameraAngle);
                                        DownTool = new PointF(toolX, toolY);
                                        await plc.WriteNodeAsync(addressConfig.Out_DownCameraStatus.Address, (Int16)1);
                                        return;
                                    }
                                    else
                                    {
                                        await plc.WriteNodeAsync(addressConfig.Out_DownCameraStatus.Address, (Int16)2);
                                        return;
                                    }

                                }
                            }
                            else
                            {
                                //暂时没有应用场景，不支持
                                await plc.WriteNodeAsync(addressConfig.Out_DownCameraStatus.Address, (Int16)2);
                                return;
                            }
                        }
                        else
                        {
                            SendTaskMessage($"触发下相机拍照信号已关闭", MessageLevel.Alarm);
                            await plc.WriteNodeAsync(addressConfig.Out_DownCameraStatus.Address, (Int16)0);
                        }
                    }
                }
                // 触发下相机拍照披头
                if (addressConfig.In_ScrewTeachExe.Address.Contains(tuple.nodeId))
                {
                    if (tuple.value is bool state)
                    {
                        if (_LastScrewTeachExe != state)
                        {
                            _LastScrewTeachExe = state;
                        }
                        else
                        {
                            return;
                        }

                        if (state)
                        {
                            SendTaskMessage($"触发下相机拍照...", MessageLevel.Debug);
                            //相机的编号
                            Int16 cameraIndex = plc.ReadNode<Int16>(addressConfig.In_DowmCameraNum.Address);
                            SendTaskMessage($"编号：{cameraIndex}", MessageLevel.Info);

                            // 获取流程
                            //var process = _productService.GetCurrentProductProcedureModelById(currentProduct.FixedUpCamera1ProcedureId);
                            //if (process == null)
                            //{
                            //    SendTaskMessage($"固定向上相机1视觉流程，流程ID：{currentProduct.FixedUpCamera1ProcedureId}", MessageLevel.Alarm);
                            //    await plc.WriteNodeAsync(addressConfig.Out_ScrewTeachOk.Address, (Int16)2);
                            //    return;
                            //}

                            //// 获取机器人当前坐标
                            //var robot = _robotService.GetAllRobots().FirstOrDefault();
                            //if (robot == null)
                            //{
                            //    SendTaskMessage($"未找到机器人，无法执行上相机锁附/组装拍照视觉任务", MessageLevel.Alarm);
                            //    await plc.WriteNodeAsync(addressConfig.Out_ScrewTeachOk.Address, (Int16)2);
                            //    return;

                            //}
                            //var currentPosition = robot.GetRobotPos();

                            //// 执行视觉任务
                            //var _cts = new CancellationTokenSource();
                            //var visionResult = await _remoteCommandService.ExecutePhotoGetSinglePoint(process, null, null, _cts.Token);
                            //if (visionResult.IsSucceed)
                            //{
                            //    //披头偏差
                            //    float offsetX = (float)(visionResult.X - currentPosition.X);
                            //    float offsetY = (float)(visionResult.Y - currentPosition.Y);

                            //    DowmCameraResults[cameraIndex] = new PointF(offsetX, offsetY);
                            //    await plc.WriteNodeAsync(addressConfig.Out_ScrewTeachOk.Address, (Int16)1);
                            //    return;
                            //}
                            //else
                            //{
                            //    await plc.WriteNodeAsync(addressConfig.Out_ScrewTeachOk.Address, (Int16)2);
                            //    return;
                            //}
                        }
                        else
                        {
                            SendTaskMessage($"触发下相机拍照信号已关闭", MessageLevel.Alarm);
                            await plc.WriteNodeAsync(addressConfig.Out_ScrewTeachOk.Address, (Int16)0);
                        }
                    }
                }
                // 触发上相机取料拍照
                else if (addressConfig.In_UpCameraPickExe.Address.Contains(tuple.nodeId))
                {
                    if (tuple.value is bool state)
                    {
                        if (_LastUpCameraPickExe != state)
                        {
                            _LastUpCameraPickExe = state;
                        }
                        else
                        {
                            return;
                        }

                        if (state)
                        {
                            SendTaskMessage($"触发上相机取料拍照...", MessageLevel.Debug);
                            //相机的编号
                            Int16 cameraIndex = plc.ReadNode<Int16>(addressConfig.In_UpCameraPickNum.Address);
                            SendTaskMessage($"编号：{cameraIndex}", MessageLevel.Info);

                            // 获取机器人当前坐标
                            var robot = _robotService.GetAllRobots().FirstOrDefault();
                            if (robot == null)
                            {
                                SendTaskMessage($"未找到机器人，无法执行上相机锁附/组装拍照视觉任务", MessageLevel.Alarm);
                                await plc.WriteNodeAsync(addressConfig.Out_DownCameraStatus.Address, (Int16)2);
                                return;

                            }
                            var currentPosition = robot.GetRobotPos();

                            //如果上相机2的流程id为空，则表示只有一个下相机
                            if (currentProduct.MoveDownCamer2PickPhotoProcedureId == Guid.Empty)
                            {
                                //获取移动向下相机1的流程
                                var process = _productService.GetCurrentProductProcedureModelById(currentProduct.MoveDownCamer1PickPhotoProcedureId);
                                if (process == null)
                                {
                                    SendTaskMessage($"移动向下相机1视觉流程，流程ID：{currentProduct.MoveDownCamer1PickPhotoProcedureId}", MessageLevel.Alarm);
                                    await plc.WriteNodeAsync(addressConfig.Out_UpCameraPickStatus.Address, (Int16)2);
                                    return;
                                }
                                // 执行视觉任务
                                var _cts = new CancellationTokenSource();
                                var visionResult = await _remoteCommandService.ExecutePhotoGetSinglePoint(process, null, new double[] { currentPosition.X, currentPosition.Y, currentPosition.U }, _cts.Token, cameraIndex, null);
                                if (visionResult.IsSucceed)
                                {
                                    currentProduct.PickPoints[0].X_Position = (float)visionResult.X;
                                    currentProduct.PickPoints[0].Y_Position = (float)visionResult.Y;
                                    //currentProduct.PickPoints[0].U_Position += (float)visionResult.U;
                                    await currentProduct.ScrewPoints[0].WriteToPlcAddress(addressConfig.Out_Pick, plc);
                                    await plc.WriteNodeAsync(addressConfig.Out_UpCameraPickStatus.Address, (Int16)1);
                                    return;
                                }
                                else
                                {
                                    await plc.WriteNodeAsync(addressConfig.Out_UpCameraPickStatus.Address, (Int16)2);
                                    return;
                                }
                            }
                            else
                            {
                                //获取固定向上相机1的流程
                                var process1 = _productService.GetCurrentProductProcedureModelById(currentProduct.MoveDownCamer1PickPhotoProcedureId);
                                if (process1 == null)
                                {
                                    SendTaskMessage($"固定向上相机1视觉流程，流程ID：{currentProduct.MoveDownCamer1PickPhotoProcedureId}", MessageLevel.Alarm);
                                    await plc.WriteNodeAsync(addressConfig.Out_UpCameraPickStatus.Address, (Int16)2);
                                    return;
                                }
                                //获取固定向上相机2的流程
                                var process2 = _productService.GetCurrentProductProcedureModelById(currentProduct.MoveDownCamer2PickPhotoProcedureId);
                                if (process2 == null)
                                {
                                    SendTaskMessage($"固定向上相机1视觉流程，流程ID：{currentProduct.MoveDownCamer2PickPhotoProcedureId}", MessageLevel.Alarm);
                                    await plc.WriteNodeAsync(addressConfig.Out_UpCameraPickStatus.Address, (Int16)2);
                                    return;
                                }
                                // 执行视觉任务
                                var _cts = new CancellationTokenSource();
                                var task1 = _remoteCommandService.ExecutePhotoGetSinglePoint(process1, null, new double[] { currentPosition.X, currentPosition.Y, currentPosition.U }, _cts.Token, 1, null);
                                var task2 = _remoteCommandService.ExecutePhotoGetSinglePoint(process2, null, new double[] { currentPosition.X, currentPosition.Y, currentPosition.U }, _cts.Token, 2, null);
                                var visionResults = await Task.WhenAll(task1, task2);
                                if (visionResults[0].IsSucceed && visionResults[1].IsSucceed)
                                {
                                    float tool1X = (float)(visionResults[0].X - visionResults[0].X);
                                    float tool1Y = (float)(visionResults[0].Y - visionResults[0].Y);
                                    float tool2X = (float)(visionResults[1].X - visionResults[1].X);
                                    float tool2Y = (float)(visionResults[1].Y - visionResults[1].Y);
                                    float toolX = (tool1X + tool2X) / 2;
                                    float toolY = (tool1Y + tool2Y) / 2;

                                    //计算两个点的线角度

                                    currentProduct.PickPoints[0].X_Position = (float)toolX;
                                    currentProduct.PickPoints[0].Y_Position = (float)toolY;
                                    //currentProduct.PickPoints[0].U_Position += (float)visionResult.U;
                                    await currentProduct.ScrewPoints[0].WriteToPlcAddress(addressConfig.Out_Pick, plc);
                                    await plc.WriteNodeAsync(addressConfig.Out_UpCameraPickStatus.Address, (Int16)1);
                                    return;
                                }
                                else
                                {
                                    await plc.WriteNodeAsync(addressConfig.Out_UpCameraPickStatus.Address, (Int16)2);
                                    return;
                                }
                            }
                        }
                        else
                        {
                            SendTaskMessage($"触发上相机取料拍照信号已关闭", MessageLevel.Alarm);
                            await plc.WriteNodeAsync(addressConfig.Out_UpCameraPickStatus.Address, (Int16)0);
                        }
                    }
                }
                // 上相机锁附/组装拍照
                else if (addressConfig.In_UpCameraPutExe.Address.Contains(tuple.nodeId))
                {
                    if (tuple.value is bool state)
                    {
                        if (_LastUpCameraPutExe != state)
                        {
                            _LastUpCameraPutExe = state;
                        }
                        else
                        {
                            return;
                        }

                        if (state)
                        {
                            SendTaskMessage($"触发上相机锁附/组装拍照...", MessageLevel.Debug);
                            //相机的编号
                            Int16 cameraIndex = plc.ReadNode<Int16>(addressConfig.In_UpCameraPutNum.Address);
                            SendTaskMessage($"编号：{cameraIndex}", MessageLevel.Info);

                            //视觉流程ID
                            Guid procedureId = currentProduct.MoveDownCamera1LockPhotoProcedureId;

                            // 获取机器人当前坐标
                            var robot = _robotService.GetAllRobots().FirstOrDefault();
                            if (robot == null)
                            {
                                SendTaskMessage($"未找到机器人，无法执行上相机锁附/组装拍照视觉任务", MessageLevel.Alarm);
                                await plc.WriteNodeAsync(addressConfig.Out_UpCameraPutStatus.Address, (Int16)2);
                                return;

                            }
                            var currentPosition = robot.GetRobotPos();


                            //如果上相机2的流程id为空，则表示只有一个上相机
                            if (currentProduct.MoveDownCamera2LockPhotoProcedureId == Guid.Empty)
                            {
                                //获取锁付拍照的点位
                                var pos = currentProduct.ScrewCameraPoints.FirstOrDefault(p => p.Number == cameraIndex);
                                if (pos != null)
                                {
                                    procedureId = pos.VisionProcessID;
                                }

                                // 获取移动向下相机的流程
                                var process = _productService.GetCurrentProductProcedureModelById(procedureId);
                                if (process == null)
                                {
                                    SendTaskMessage($"未找到移动向下相机组装拍照对应的视觉流程流程ID:{procedureId}", MessageLevel.Alarm);
                                    await plc.WriteNodeAsync(addressConfig.Out_UpCameraPutStatus.Address, (Int16)2);
                                    return;
                                }

                                // 执行视觉任务
                                var _cts = new CancellationTokenSource();
                                var visionResult = await _remoteCommandService.ExecutePhotoGetSinglePoint(process, null, new double[] { currentPosition.X, currentPosition.Y, currentPosition.U }, _cts.Token, cameraIndex, null);
                                if (isDryMode)
                                {
                                    await plc.WriteNodeAsync(addressConfig.Out_UpCameraPutStatus.Address, (Int16)1);
                                    return;
                                }
                                if (visionResult.IsSucceed)
                                {
                                    UpCameraPutResults[cameraIndex] = new OpenCvSharp.Point3f((float)visionResult.X, (float)visionResult.Y, (float)visionResult.U);
                                    SendTaskMessage($"移动向下相机拍照[{cameraIndex}]结果: {UpCameraPutResults[cameraIndex].X:F3},{UpCameraPutResults[cameraIndex].Y:F3},{UpCameraPutResults[cameraIndex].Z:F3}", MessageLevel.Info);
                                    await plc.WriteNodeAsync(addressConfig.Out_UpCameraPutStatus.Address, (Int16)1);
                                    return;
                                }
                                else
                                {
                                    await plc.WriteNodeAsync(addressConfig.Out_UpCameraPutStatus.Address, (Int16)2);
                                    return;
                                }
                            }
                            else
                            {
                                //获取移动向下相机1的流程
                                var process1 = _productService.GetCurrentProductProcedureModelById(currentProduct.MoveDownCamera1LockPhotoProcedureId);
                                if (process1 == null)
                                {
                                    SendTaskMessage($"固定向上相机1视觉流程，流程ID：{currentProduct.MoveDownCamera1LockPhotoProcedureId}", MessageLevel.Alarm);
                                    await plc.WriteNodeAsync(addressConfig.Out_UpCameraPutStatus.Address, (Int16)2);
                                    return;
                                }
                                //获取移动向下相机2的流程
                                var process2 = _productService.GetCurrentProductProcedureModelById(currentProduct.MoveDownCamera2LockPhotoProcedureId);
                                if (process2 == null)
                                {
                                    SendTaskMessage($"固定向上相机1视觉流程，流程ID：{currentProduct.MoveDownCamera2LockPhotoProcedureId}", MessageLevel.Alarm);
                                    await plc.WriteNodeAsync(addressConfig.Out_UpCameraPutStatus.Address, (Int16)2);
                                    return;
                                }
                                // 执行视觉任务
                                var _cts = new CancellationTokenSource();
                                var task1 = _remoteCommandService.ExecutePhotoGetSinglePoint(process1, null, new double[] { currentPosition.X, currentPosition.Y, currentPosition.U }, _cts.Token, 1, null);
                                var task2 = _remoteCommandService.ExecutePhotoGetSinglePoint(process2, null, new double[] { currentPosition.X, currentPosition.Y, currentPosition.U }, _cts.Token, 2, null);
                                var visionResults = await Task.WhenAll(task1, task2);
                                if (isDryMode)
                                {
                                    await plc.WriteNodeAsync(addressConfig.Out_UpCameraPutStatus.Address, (Int16)1);
                                    return;
                                }
                                if (visionResults[0].IsSucceed && visionResults[1].IsSucceed)
                                {
                                    float centerX = (float)(visionResults[0].X + visionResults[1].X) / 2;
                                    float centerY = (float)(visionResults[0].Y + visionResults[1].Y) / 2;
                                    _MoveCameraAngle = Common.CalculateAngleBetweenPointsDegrees(new PointF((float)visionResults[0].X, (float)visionResults[0].Y), new PointF((float)visionResults[1].X, (float)visionResults[1].Y));
                                    UpCameraPutResults[cameraIndex] = new OpenCvSharp.Point3f(centerX, centerY, (float)_MoveCameraAngle);
                                    await plc.WriteNodeAsync(addressConfig.Out_UpCameraPutStatus.Address, (Int16)1);
                                    return;
                                }
                                else
                                {
                                    await plc.WriteNodeAsync(addressConfig.Out_UpCameraPutStatus.Address, (Int16)2);
                                    return;
                                }
                            }
                        }
                        else
                        {
                            SendTaskMessage($"触发上相机锁附/组装拍照信号已关闭", MessageLevel.Alarm);
                            await plc.WriteNodeAsync(addressConfig.Out_UpCameraPutStatus.Address, (Int16)0);
                        }
                    }
                }
                // 上相机检测拍照
                else if (addressConfig.In_UPCameracheckExe.Address.Contains(tuple.nodeId))
                {
                    if (tuple.value is bool state)
                    {
                        if (_LastUPCameracheckExe != state)
                        {
                            _LastUPCameracheckExe = state;
                        }
                        else
                        {
                            return;
                        }

                        if (state)
                        {
                            SendTaskMessage($"触发上相机检测拍照...", MessageLevel.Debug);
                            //相机的编号
                            Int16 cameraIndex = plc.ReadNode<Int16>(addressConfig.In_UPCameracheckNum.Address);

                            //视觉流程ID
                            Guid procedureId = Guid.Empty;
                            //获取锁付拍照的点位
                            var pos = currentProduct.CheckCameraPoints.FirstOrDefault(p => p.Number == cameraIndex);
                            if (pos != null)
                            {
                                procedureId = pos.VisionProcessID;
                            }

                            // 获取流程
                            var process = _productService.GetCurrentProductProcedureModelById(procedureId);
                            if (process == null)
                            {
                                SendTaskMessage(string.Format("未找到点位：{0}的视觉流程：{1}", cameraIndex, procedureId), MessageLevel.Alarm);
                                await plc.WriteNodeAsync(addressConfig.Out_UPCameracheckStatus.Address, (Int16)2);
                                return;
                            }

                            // 获取机器人当前坐标
                            var robot = _robotService.GetAllRobots().FirstOrDefault();
                            if (robot == null)
                            {
                                SendTaskMessage($"未找到机器人，无法执行上相机锁附/组装拍照视觉任务", MessageLevel.Alarm);
                                await plc.WriteNodeAsync(addressConfig.Out_UpCameraPutStatus.Address, (Int16)2);
                                return;

                            }
                            var currentPosition = robot.GetRobotPos();

                            // 执行视觉任务
                            var _cts = new CancellationTokenSource();
                            var visionResult = await _remoteCommandService.ExecutePhotoGetDistance(1, process, null, new double[] { currentPosition.X, currentPosition.Y, currentPosition.U }, _cts.Token, cameraIndex, null);
                            if (visionResult.IsSucceed)
                            {
                                await plc.WriteNodeAsync(addressConfig.Out_UPCameracheckStatus.Address, (Int16)1);
                                SendTaskMessage($"点位{cameraIndex}检测OK", MessageLevel.Debug);
                            }
                            else
                            {
                                await plc.WriteNodeAsync(addressConfig.Out_UPCameracheckStatus.Address, (Int16)2);
                                SendTaskMessage($"点位{cameraIndex}检测NG", MessageLevel.Error);
                            }
                            if (mes_cc.ContainsKey(visionResult.distance.Split(',')[0]))
                            {
                                mes_cc[visionResult.distance.Split(',')[0]] = visionResult.distance.Split(',')[1];
                            }
                            else
                            {
                                mes_cc.Add(visionResult.distance.Split(',')[0], visionResult.distance.Split(',')[1]);
                            }
                            await plc.WriteNodeAsync(addressConfig.Out_UPCameracheckStatus.Address, (Int16)1);
                        }
                        else
                        {
                            SendTaskMessage($"触发上相机检测拍照信号已关闭", MessageLevel.Alarm);
                            await plc.WriteNodeAsync(addressConfig.Out_UPCameracheckStatus.Address, (Int16)0);
                        }
                    }
                }
                // 固定相机取料拍照
                else if (addressConfig.In_FixedCameraPickExe.Address.Contains(tuple.nodeId))
                {
                    if (tuple.value is bool state)
                    {
                        if (_LastFixedCameraPickExe != state)
                        {
                            _LastFixedCameraPickExe = state;
                        }
                        else
                        {
                            return;
                        }

                        if (state)
                        {
                            SendTaskMessage($"触发固定相机取料拍照...", MessageLevel.Debug);
                            //相机的编号
                            //Int16 cameraIndex = plc.ReadNode<Int16>(addressConfig.In_FixedCameraPickNum.Address);



                            await plc.WriteNodeAsync(addressConfig.Out_FixedCameraPickStatus.Address, (Int16)1);
                        }
                        else
                        {
                            SendTaskMessage($"触发固定相机取料拍照信号已关闭", MessageLevel.Alarm);
                            await plc.WriteNodeAsync(addressConfig.Out_FixedCameraPickStatus.Address, (Int16)0);
                        }
                    }
                }
                // 固定相机锁附/组装拍照
                else if (addressConfig.In_FixedCameraPutExe.Address.Contains(tuple.nodeId))
                {
                    if (tuple.value is bool state)
                    {
                        if (_LastFixedCameraPutExe != state)
                        {
                            _LastFixedCameraPutExe = state;
                        }
                        else
                        {
                            return;
                        }

                        if (state)
                        {
                            SendTaskMessage($"触发固定相机锁附/组装拍照...", MessageLevel.Debug);
                            //相机的编号
                            //Int16 cameraIndex = plc.ReadNode<Int16>(addressConfig.In_FixedCameraPutNum.Address);


                            await plc.WriteNodeAsync(addressConfig.Out_FixedCameraPutStatus.Address, (Int16)1);
                        }
                        else
                        {
                            SendTaskMessage($"触发固定相机锁附/组装拍照信号已关闭", MessageLevel.Alarm);
                            await plc.WriteNodeAsync(addressConfig.Out_FixedCameraPutStatus.Address, (Int16)0);
                        }
                    }
                }
                // 固定相机检测拍照
                else if (addressConfig.In_FixedCameracheckExe.Address.Contains(tuple.nodeId))
                {
                    if (tuple.value is bool state)
                    {
                        if (_LastFixedCameracheckExe != state)
                        {
                            _LastFixedCameracheckExe = state;
                        }
                        else
                        {
                            return;
                        }

                        if (state)
                        {
                            SendTaskMessage($"触发固定相机检测拍照...", MessageLevel.Debug);
                            //相机的编号
                            Int16 cameraIndex = plc.ReadNode<Int16>(addressConfig.In_FixedCameracheckNum.Address);
                            List<Task<(bool IsSucceed, double X, double Y, double U)>> visionTasks = new List<Task<(bool IsSucceed, double X, double Y, double U)>>();
                            List<ProcedureModel> visionProcesses = new List<ProcedureModel>();

                            if (currentProduct.MoveDownCamer1CheckProcedureId != Guid.Empty)
                            {
                                var process = _productService.GetCurrentProductProcedureModelById(currentProduct.MoveDownCamer1CheckProcedureId);
                                if (process != null)
                                {
                                    visionProcesses.Add(process);
                                }
                            }
                            if (currentProduct.MoveDownCamer2CheckProcedureId != Guid.Empty)
                            {
                                var process = _productService.GetCurrentProductProcedureModelById(currentProduct.MoveDownCamer2CheckProcedureId);
                                if (process != null)
                                {
                                    visionProcesses.Add(process);
                                }
                            }

                            if (visionProcesses.Count <= 0)
                            {
                                SendTaskMessage($"未配置移动向下相机检测视觉流程", MessageLevel.Alarm);
                                await plc.WriteNodeAsync(addressConfig.Out_FixedCameracheckStatus.Address, (Int16)2);
                                return;
                            }

                            // 执行视觉任务
                            var _cts = new CancellationTokenSource();
                            for (int i = 0; i < visionProcesses.Count; i++)
                            {
                                visionTasks.Add(_remoteCommandService.ExecutePhotoGetSinglePoint(visionProcesses[i], null, null, _cts.Token, i + 1, null));
                            }

                            var visionResults = await Task.WhenAll(visionTasks.ToArray());

                            if (isDryMode)
                            {
                                await plc.WriteNodeAsync(addressConfig.Out_FixedCameracheckStatus.Address, (Int16)1);
                                return;
                            }
                            //获取visionResults集合中所有的结果，如果全部成功则为通过
                            bool allSucceed = true;
                            for (int i = 0; i < visionResults.Length; i++)
                            {
                                if (!visionResults[i].IsSucceed)
                                {
                                    allSucceed = false;
                                    break;
                                }
                            }

                            if (allSucceed)
                            {
                                SendTaskMessage($"固定相机检测OK", MessageLevel.Debug);
                                await plc.WriteNodeAsync(addressConfig.Out_FixedCameracheckStatus.Address, (Int16)1);
                                return;
                            }
                            else
                            {
                                SendTaskMessage($"固定相机检测NG", MessageLevel.Error);
                                await plc.WriteNodeAsync(addressConfig.Out_FixedCameracheckStatus.Address, (Int16)2);
                                return;
                            }
                        }
                        else
                        {
                            SendTaskMessage($"触发固定相机检测拍照信号已关闭", MessageLevel.Alarm);
                            await plc.WriteNodeAsync(addressConfig.Out_FixedCameracheckStatus.Address, (Int16)0);
                        }
                    }
                }
                // 多相机坐标合并
                else if (addressConfig.In_RequestPosition.Address.Contains(tuple.nodeId))
                {
                    if (tuple.value is Int16 state)
                    {
                        if (_LastRequestPosition != state)
                        {
                            _LastRequestPosition = state;
                        }
                        else
                        {
                            return;
                        }

                        if (state == 1)
                        {
                            SendTaskMessage($"收到多相机坐标合并请求，开始合并...", MessageLevel.Debug);
                            if (isDryMode)
                            {
                                var point1 = currentProduct.ScrewPoints[0].Clone();
                                SendTaskMessage($"点：1，{point1.X_Position:F3}，{point1.Y_Position:F4}，{point1.U_Position:F4}", MessageLevel.Info);
                                await point1.WriteToPlcAddress(addressConfig.Out_Screw, plc);
                                await plc.WriteNodeAsync(addressConfig.Out_WorkNum.Address, (Int16)1);
                                await plc.WriteNodeAsync(addressConfig.Out_CameraDone.Address, (Int16)1);
                                return;
                            }

                            double upCameraX = 0, upCameraY = 0, upCameraU = 0;
                            upCameraX = UpCameraPutResults[1].X;
                            upCameraY = UpCameraPutResults[1].Y;
                            upCameraU = UpCameraPutResults[1].Z;
                            //如果下相机拍照的次数是1，则判断用时拍照的相机是几个
                            int upCameraNum = _configService.GetSystemConfiguration().UpCameraPutNum;
                            if (upCameraNum == 2)
                            {
                                upCameraX = (UpCameraPutResults[1].X + UpCameraPutResults[2].X) / 2;
                                upCameraY = (UpCameraPutResults[1].Y + UpCameraPutResults[2].Y) / 2;
                                upCameraU = Common.CalculateAngleBetweenPointsDegrees(new PointF((float)UpCameraPutResults[1].X, (float)UpCameraPutResults[1].Y), new PointF((float)UpCameraPutResults[2].X, (float)UpCameraPutResults[2].Y));
                            }

                            var point = currentProduct.ScrewPoints[0].Clone();
                            var pn = Vector<double>.Build.Dense(new double[] { upCameraX, upCameraY });
                            //目标角度：
                            double angle = point.U_Position - (DowmCameraResults[1].Z - currentProduct.FixedUpCameraTempletAngle) + (upCameraU - currentProduct.MoveDownCamerTempletAngle);

                            var toolCoord = new ToolCoord();
                            toolCoord.SetTool(DowmCameraResults[1].X, DowmCameraResults[1].Y);
                            //将_PutPoint转换为Tool0下要走的点
                            var p0 = toolCoord.GetTool0Coord(pn, angle);
                            point.X_Position = (float)p0[0];
                            point.Y_Position = (float)p0[1];
                            point.U_Position = (float)angle;
                            PlaceActualCoord = new OpenCvSharp.Point3f(point.X_Position, point.Y_Position, point.U_Position);
                            SendTaskMessage($"点：1，{point.X_Position:F3}，{point.Y_Position:F4}，{point.U_Position:F4}", MessageLevel.Info);
                            await point.WriteToPlcAddress(addressConfig.Out_Screw, plc);
                            await plc.WriteNodeAsync(addressConfig.Out_WorkNum.Address, (Int16)1);
                            await plc.WriteNodeAsync(addressConfig.Out_CameraDone.Address, (Int16)1);
                        }
                        else
                        {
                            SendTaskMessage($"多相机坐标合并请求已结束或被取消，state={state}", MessageLevel.Alarm);
                            await plc.WriteNodeAsync(addressConfig.Out_CameraDone.Address, (Int16)0);
                        }
                    }
                }
                // 螺丝供料器螺丝递减
                else if (addressConfig.In_PickINC.Address.Contains(tuple.nodeId))
                {
                    if (tuple.value is Int16 state)
                    {
                        if (_LastPickINC != state)
                        {
                            _LastPickINC = state;
                        }
                        else
                        {
                            return;
                        }

                        if (state != 0)
                        {
                            SendTaskMessage($"螺丝供料器...", MessageLevel.Info);
                            await plc.WriteNodeAsync(addressConfig.In_PickINC.Address, (Int16)0);
                        }

                    }
                }
                // PLC请求二维码拍照
                else if (addressConfig.In_QrCodePhotoRequest.Address.Contains(tuple.nodeId))
                {
                    if (tuple.value is Int16 state)
                    {
                        if (_LastQrCodePhotoRequest != state)
                        {
                            _LastQrCodePhotoRequest = state;
                        }
                        else
                        {
                            return;
                        }
                        if (state == 1)
                        {
                            SendTaskMessage("收到PLC二维码拍照请求", MessageLevel.Debug);
                            // 四、几个非常重要的细节（工程级）
                            //1.Reset() 一定在发送命令前
                            //_scanDoneEvent.Reset();      
                            //否则：                            
                            //上一次扫码的 Set() 还在
                            //本次 Wait() 会直接通过（严重 bug）
                            // 2.Wait() 不要直接在 UI 线程
                            //你这里是 async，用：
                            //await Task.Run(() => _scanDoneEvent.Wait(3000));
                            ScanValue = "";
                            _scanDoneEvent.Reset(); // 重要：先关门

                            await Scan_Client.SendAsync("T\r\n");

                            // 等待扫码结果，最多 3 秒
                            bool scanOk = await Task.Run(() => _scanDoneEvent.Wait(3000));

                            if (scanOk && !ScanValue.IsNullOrWhiteSpace())
                            {
                                PartSN = ScanValue;
                                //await plc.WriteNodeAsync(addressConfig.Out_PartCode.Address, PartSN);
                                SendTaskMessage($"二维码拍照成功,接收到值:{ScanValue}", MessageLevel.Info);

                                var stationConfig = _configService.GetDeviceInfo(0);
                                if (stationConfig.EnableMES)
                                {
                                    (bool isSuccess, string response) = await _mesService.StationGetEx2Async(0, PartSN, "", 2);//询问零件码,是否可以使用
                                    if (!isSuccess)//如果二维码已使用，则返回false
                                    {
                                        await plc.WriteNodeAsync(addressConfig.Out_QrCodePhotoResault.Address, (Int16)3);
                                        return;
                                    }
                                }
                            }
                            else
                            {
                                SendTaskMessage("二维码拍照失败或超时", MessageLevel.Alarm);
                                await plc.WriteNodeAsync(addressConfig.Out_QrCodePhotoResault.Address, (short)2);
                            }
                        }
                        else
                        {
                            SendTaskMessage("二维码拍照点位发送信号已关闭", MessageLevel.Alarm);
                            await plc.WriteNodeAsync(addressConfig.Out_QrCodePhotoResault.Address, (Int16)0);
                        }
                    }
                }
                // 抛料计数
                else if (addressConfig.In_Throw.Address.Contains(tuple.nodeId))
                {
                    if (tuple.value is bool state)
                    {
                        if (_LastThrowExe != state)
                        {
                            _LastThrowExe = state;
                        }
                        else
                        {
                            return;
                        }
                        if (state)
                        {
                            SendTaskMessage("收到抛料信号", MessageLevel.Info);
                            await _systemDatabaseService.RecordThrowNumberAsync(new ThrowRecord()
                            {
                                DayTime = DateTime.Now,
                                ThrowCount = 1
                            });
                        }
                    }
                }
                else
                {
                    // 过站检查
                    for (int i = 0; i < 10; i++)
                    {
                        if (string.Format(addressConfig.In_MesCheck.Address, i).Contains(tuple.nodeId))
                        {
                            if (tuple.value is Int16 state)
                            {
                                if (_LastMesCheck[i] != state)
                                {
                                    _LastMesCheck[i] = state;
                                }
                                else
                                {
                                    return;
                                }
                                var code = plc.ReadNode<string>(string.Format(addressConfig.In_Code.Address, i));
                                string comp = "";
                                //过站请求
                                if (state == 1)
                                {

                                    // 这里缺少从MES获取产品配方的内容，需要补充

                                    _LastMesCheckTime[i] = (await _mesService.GetServerTimeAsync(i, code, 2)).Now;

                                    //获取当前工位的配置
                                    var stationConfig = _configService.GetDeviceInfo(i);
                                    if (stationConfig.EnableDoubleMes)
                                    {
                                        SendTaskMessage($"收到{i}:{stationConfig.DeviceName}过站检查请求（当站是否生产）(当前需要双MES验证)...", MessageLevel.Debug);

                                        LogHelper.WriteLogMes($"【mes开始QUERY】");
                                        SendTaskMessage($"mes开始QUERY", MessageLevel.Info);
                                        (bool isSuccess, string response) = await _mesService.StationGetExAsync(i, code, "", 2);//询问mes
                                        if (isSuccess)
                                        {
                                            LogHelper.WriteLogMes($"询问mes成功");
                                            SendTaskMessage($"询问mes成功:{response}", MessageLevel.Debug);
                                            string ProductMainSN_Temp = "";
                                            string[] item = response.Split('\n');
                                            //获取过度件sn
                                            string snItem = item.FirstOrDefault(f => f.Contains("sn="));
                                            if (snItem != null)
                                            {
                                                ProductMainSN_Temp = snItem.Replace("sn=", "").Trim();
                                                SendTaskMessage($"过度件sn：{ProductMainSN_Temp}", MessageLevel.Info);
                                            }

                                            (bool isSuccess2, string response2) = await _mesService.StationGetAsync(i, ProductMainSN_Temp, "", 2);//询问mes
                                            if (isSuccess2)
                                            {
                                                LogHelper.WriteLogMes($"第二次询问mes成功");
                                                SendTaskMessage($"第二次询问mes成功:{response2}", MessageLevel.Debug);
                                                item = response2.Split('\n');
                                                //获取产品主sn和wo用于后续上传数据使用
                                                snItem = item.FirstOrDefault(f => f.Contains("sn="));
                                                if (snItem != null)
                                                {
                                                    ProductMainSN[i] = snItem.Replace("sn=", "").Trim();
                                                    if (i == 0)
                                                    {
                                                        _productService.CurrentProductCode = ProductMainSN[i];
                                                        _eventAggregator.GetEvent<DelaySaveImageNotification>().Publish(true);//通知界面延迟保存图片，等待MES查询结果返回，避免图片和数据不同步
                                                    }
                                                    SendTaskMessage($"产品主sn：{ProductMainSN[i]}", MessageLevel.Info);
                                                }
                                                string woItem = item.FirstOrDefault(f => f.Contains("wo="));
                                                if (woItem != null)
                                                {
                                                    wo[i] = woItem.Replace("wo=", "").Trim();
                                                    SendTaskMessage($"工单信息：{wo[i]}", MessageLevel.Info);
                                                }
                                                string modelItem = item.FirstOrDefault(f => f.Contains("model_num="));
                                                if (modelItem != null)
                                                {
                                                    model_num[i] = modelItem.Replace("model_num=", "").Trim();
                                                    SendTaskMessage($"model_num：{model_num[i]}", MessageLevel.Info);
                                                }
                                                string colorItem = item.FirstOrDefault(f => f.Contains("color="));
                                                if (colorItem != null)
                                                {
                                                    color[i] = colorItem.Replace("color=", "").Trim();
                                                    SendTaskMessage($"color：{color[i]}", MessageLevel.Info);
                                                }
                                                //切换产品
                                                if (i == 0)//i=0时才会切换产品
                                                {
                                                    var q = await _systemDatabaseService.QueryProductFromMesAsync(model_num[i], color[i]);
                                                    if (!string.IsNullOrEmpty(q))
                                                    {
                                                        ProductList = new ObservableCollection<ProductModel>(_productService.GetAllProducts());
                                                        Guid productId = Guid.Empty;
                                                        foreach (var itt in ProductList)
                                                        {
                                                            if (itt.Name == q)
                                                            {
                                                                productId = itt.ID;
                                                                break;
                                                            }
                                                        }
                                                        if (currentProduct.ID != productId)
                                                        {
                                                            //切换产品
                                                            _productService.LoadProduct(productId);
                                                            _productService.SetCurrentProduct(productId);
                                                            await WritePositionToPlcAsync();
                                                            SendTaskMessage($"切换产品成功", MessageLevel.Debug);
                                                        }
                                                    }
                                                }
                                                //产品发生改变并且供料器发生了变化时，需要通知PLC进行取料更改
                                                await plc.WriteNodeAsync(addressConfig.Out_ScrewFeederIsChanged.Address, (Int16)1); //不发生改变
                                                await plc.WriteNodeAsync(string.Format(addressConfig.Out_MesStatus.Address, i), (Int16)1);
                                            }
                                            else
                                            {
                                                LogHelper.WriteLogMes($"第二次询问mes失败");
                                                SendTaskMessage($"第二次询问mes失败:{response2}", MessageLevel.Error);

                                                //产品发生改变并且供料器发生了变化时，需要通知PLC进行取料更改
                                                await plc.WriteNodeAsync(addressConfig.Out_ScrewFeederIsChanged.Address, (Int16)1); //不发生改变
                                                await plc.WriteNodeAsync(string.Format(addressConfig.Out_MesStatus.Address, i), (Int16)2);
                                            }
                                        }
                                        else
                                        {
                                            LogHelper.WriteLogMes($"询问mes失败");
                                            SendTaskMessage($"询问mes失败:{response}", MessageLevel.Error);

                                            //产品发生改变并且供料器发生了变化时，需要通知PLC进行取料更改
                                            await plc.WriteNodeAsync(addressConfig.Out_ScrewFeederIsChanged.Address, (Int16)1); //不发生改变
                                            await plc.WriteNodeAsync(string.Format(addressConfig.Out_MesStatus.Address, i), (Int16)2);
                                        }
                                        LogHelper.WriteLogMes($"【mes结束QUERY】");
                                        SendTaskMessage($"mes结束QUERY", MessageLevel.Info);
                                    }
                                    else if (stationConfig.EnableMES)
                                    {
                                        SendTaskMessage($"收到{i}:{stationConfig.DeviceName}过站检查请求（当站是否生产）(当前不需要双MES验证)...", MessageLevel.Debug);

                                        LogHelper.WriteLogMes($"【mes开始QUERY】");
                                        SendTaskMessage($"mes开始QUERY", MessageLevel.Info);
                                        (bool isSuccess, string response) = await _mesService.StationGetAsync(i, code, "", 2);//询问mes
                                        if (isSuccess)
                                        {
                                            string[] item = response.Split('\n');
                                            //获取产品主sn和wo用于后续上传数据使用
                                            string snItem = item.FirstOrDefault(f => f.Contains("sn="));
                                            if (snItem != null)
                                            {
                                                ProductMainSN[i] = snItem.Replace("sn=", "").Trim();
                                                if (i == 0)
                                                {
                                                    _productService.CurrentProductCode = ProductMainSN[i];
                                                    _eventAggregator.GetEvent<DelaySaveImageNotification>().Publish(true);//通知界面延迟保存图片，等待MES查询结果返回，避免图片和数据不同步
                                                }
                                                SendTaskMessage($"产品主sn：{ProductMainSN[i]}", MessageLevel.Info);
                                            }
                                            string woItem = item.FirstOrDefault(f => f.Contains("wo="));
                                            if (woItem != null)
                                            {
                                                wo[i] = woItem.Replace("wo=", "").Trim();
                                                SendTaskMessage($"工单信息：{wo[i]}", MessageLevel.Info);
                                            }
                                            string modelItem = item.FirstOrDefault(f => f.Contains("model_num="));
                                            if (modelItem != null)
                                            {
                                                model_num[i] = modelItem.Replace("model_num=", "").Trim();
                                                SendTaskMessage($"model_num：{model_num[i]}", MessageLevel.Info);
                                            }
                                            string colorItem = item.FirstOrDefault(f => f.Contains("color="));
                                            if (colorItem != null)
                                            {
                                                color[i] = colorItem.Replace("color=", "").Trim();
                                                SendTaskMessage($"color：{color[i]}", MessageLevel.Info);
                                            }
                                            LogHelper.WriteLogMes($"询问mes成功");
                                            SendTaskMessage($"询问mes成功:{response}", MessageLevel.Debug);
                                            //切换产品
                                            if (i == 0)//i=0时才会切换产品
                                            {
                                                var q = await _systemDatabaseService.QueryProductFromMesAsync(model_num[i], color[i]);
                                                if (!string.IsNullOrEmpty(q))
                                                {
                                                    ProductList = new ObservableCollection<ProductModel>(_productService.GetAllProducts());
                                                    Guid productId = Guid.Empty;
                                                    foreach (var itt in ProductList)
                                                    {
                                                        if (itt.Name == q)
                                                        {
                                                            productId = itt.ID;
                                                            break;
                                                        }
                                                    }
                                                    if (currentProduct.ID != productId)
                                                    {
                                                        //切换产品
                                                        _productService.LoadProduct(productId);
                                                        _productService.SetCurrentProduct(productId);
                                                        await WritePositionToPlcAsync();
                                                        SendTaskMessage($"切换产品成功", MessageLevel.Debug);
                                                    }
                                                }
                                            }
                                            //产品发生改变并且供料器发生了变化时，需要通知PLC进行取料更改
                                            await plc.WriteNodeAsync(addressConfig.Out_ScrewFeederIsChanged.Address, (Int16)1); //不发生改变
                                            await plc.WriteNodeAsync(string.Format(addressConfig.Out_MesStatus.Address, i), (Int16)1);
                                        }
                                        else
                                        {
                                            LogHelper.WriteLogMes($"询问mes失败");
                                            SendTaskMessage($"询问mes失败:{response}", MessageLevel.Error);
                                            //产品发生改变并且供料器发生了变化时，需要通知PLC进行取料更改
                                            await plc.WriteNodeAsync(addressConfig.Out_ScrewFeederIsChanged.Address, (Int16)1); //不发生改变
                                            await plc.WriteNodeAsync(string.Format(addressConfig.Out_MesStatus.Address, i), (Int16)2);
                                        }
                                        LogHelper.WriteLogMes($"【mes结束QUERY】");
                                        SendTaskMessage($"mes结束QUERY", MessageLevel.Info);
                                    }
                                    else
                                    {
                                        ProductMainSN[i] = DateTime.Now.ToString();
                                        if (i == 0)
                                        {
                                            _productService.CurrentProductCode = ProductMainSN[i];
                                            _eventAggregator.GetEvent<DelaySaveImageNotification>().Publish(true);//通知界面延迟保存图片，等待MES查询结果返回，避免图片和数据不同步
                                        }

                                        LogHelper.WriteLogMes("未启用mes");
                                        SendTaskMessage("未启用mes", MessageLevel.Error);
                                        //产品发生改变并且供料器发生了变化时，需要通知PLC进行取料更改
                                        await plc.WriteNodeAsync(addressConfig.Out_ScrewFeederIsChanged.Address, (Int16)1); //不发生改变
                                        await plc.WriteNodeAsync(string.Format(addressConfig.Out_MesStatus.Address, i), (Int16)1);
                                    }
                                }
                                // 上传本站数据
                                else if (state == 2)
                                {
                                    DFC.Clear();

                                    //获取当前工位的配置
                                    var stationConfig = _configService.GetDeviceInfo(i);
                                    SendTaskMessage($"收到{i}:{stationConfig.DeviceName}上传本站数据请求...", MessageLevel.Debug);
                                    //从服务器中获取当前时间
                                    var serverTimeResult = await _mesService.GetServerTimeAsync(i, code, 2);

                                    double ct = serverTimeResult.Now.Subtract(_LastMesCheckTime[i]).TotalSeconds;
                                    if (i == 0)
                                    {
                                        CTtime = ct;
                                        _eventAggregator.GetEvent<DelaySaveImageNotification>().Publish(false);//通知界面延迟保存图片，等待MES查询结果返回，避免图片和数据不同步
                                    }

                                    //读取产品结果
                                    Int16 resultIndex = plc.ReadNode<Int16>(string.Format(addressConfig.In_Result.Address, i));
                                    //读取压力值
                                    float pressure = plc.ReadNode<float>(string.Format(addressConfig.In_PressureValue.Address, i));
                                    AssemblyRecord assemblyRecord = new AssemblyRecord();
                                    assemblyRecord.ProductSN = ProductMainSN[i];
                                    assemblyRecord.RecipeName = currentProduct.Name;
                                    assemblyRecord.PartSN = PartSN;
                                    assemblyRecord.AssemblyDurationSeconds = ct;
                                    assemblyRecord.AssemblyPressure = pressure;
                                    assemblyRecord.DeviceId = i;
                                    assemblyRecord.DeviceName = stationConfig.DeviceName;
                                    assemblyRecord.OperatorName = _systemDatabaseService.GetCurrentUser().UserName;
                                    assemblyRecord.Success = resultIndex == 1 ? true : false;
                                    assemblyRecord.DownCameraCoord1 = "";
                                    assemblyRecord.DownCameraCoord2 = "";
                                    assemblyRecord.DownCameraCoord3 = "";
                                    assemblyRecord.DownCameraCoord4 = "";
                                    assemblyRecord.PickMoveCameraCoord = "";
                                    assemblyRecord.PlaceMoveCameraCoord1 = "";
                                    assemblyRecord.PlaceMoveCameraCoord2 = "";
                                    assemblyRecord.PlaceMoveCameraCoord3 = "";
                                    assemblyRecord.PlaceMoveCameraCoord4 = "";
                                    assemblyRecord.PlaceActualCoord = "";

                                    //目前只记录当前站
                                    if (i == 0)
                                    {
                                        await _systemDatabaseService.RecordProductionAsync(new ProductionRecord()
                                        {
                                            ProductName = currentProduct.Name,
                                            ProductCode = ProductMainSN[i],
                                            DeviceId = i,
                                            DeviceName = "",
                                            Category = resultIndex == 1 ? "OK" : "NG",
                                            Quantity = 1,
                                            Remark = $"TotalSeconds:{ct.ToString("F2")}",
                                            UserName = _systemDatabaseService.GetCurrentUser().UserName,
                                        });
                                        assemblyRecord.DownCameraCoord1 = $"{DowmCameraResults[1].X:F3},{DowmCameraResults[1].Y:F3},{DowmCameraResults[1].Z:F3}";
                                        assemblyRecord.PlaceMoveCameraCoord1 = $"{UpCameraPutResults[1].X:F3},{UpCameraPutResults[1].Y:F3},{UpCameraPutResults[1].Z:F3}";
                                        assemblyRecord.PlaceMoveCameraCoord2 = $"{UpCameraPutResults[2].X:F3},{UpCameraPutResults[2].Y:F3},{UpCameraPutResults[2].Z:F3}";
                                        assemblyRecord.PlaceActualCoord = $"{PlaceActualCoord.X:F3},{PlaceActualCoord.Y:F3},{PlaceActualCoord.Z:F3}";
                                        App.Current.Dispatcher.Invoke(() =>
                                        {
                                            _eventAggregator.GetEvent<AssemblyFinishNotification>().Publish(assemblyRecord);
                                        });
                                    }

                                    await _systemDatabaseService.RecordAssemblyAsync(assemblyRecord);
                                    LogHelper.WriteLogMes($"【mes开始ADD】");
                                    SendTaskMessage($"mes开始ADD", MessageLevel.Info);
                                    string assypress = ""; string cc = "";
                                    cc = string.Join(",", mes_cc.OrderBy(kv => kv.Key, StringComparer.Ordinal).Select(kv => kv.Value));
                                    assypress = currentPressure[i].ToString("F2");
                                    SendTaskMessage($"cc:{cc},组装压力:{assypress}", MessageLevel.Debug);

                                    //cc-复检cc,assypress-组装站压力
                                    (bool isSuccess, string response) = await _mesService.SubmitGetAsync(i, ProductMainSN[i], comp, cc, assypress, resultIndex == 1 ? true : false, _LastMesCheckTime[i], serverTimeResult.Now);
                                    if (!stationConfig.EnableMES || isSuccess)
                                    {
                                        LogHelper.WriteLogMes($"上传mes成功");
                                        SendTaskMessage($"上传mes成功", MessageLevel.Debug);
                                    }
                                    else
                                    {
                                        LogHelper.WriteLogMes($"上传mes失败");
                                        SendTaskMessage($"上传mes失败", MessageLevel.Error);
                                    }

                                    await plc.WriteNodeAsync(string.Format(addressConfig.Out_MesStatus.Address, i), (Int16)3);
                                    LogHelper.WriteLogMes($"【mes结束ADD】");
                                    SendTaskMessage($"mes结束ADD", MessageLevel.Info);

                                    //是否保存当前的产品记录至CSV?
                                    if (stationConfig.SaveCsv)
                                    {
                                        //判断锁付路径字符串是否为空，如果不为空则保存，否则不保存
                                        if (!string.IsNullOrEmpty(stationConfig.SaveCsvPath))
                                        {
                                            bool assyPress = resultIndex == 1 ? true : false;
                                            DFC.Clear();

                                            foreach (var item in mes_cc)
                                            {
                                                DFC.Add(new DataFormCtq
                                                {
                                                    PPID = ProductMainSN[i],
                                                    PROCESS_NAME = stationConfig.DataInfo.PROCESS_NAME,
                                                    PROCESS_START_TIME = _LastMesCheckTime[i].ToString("yyyy-MM-ddTHH:mm:ss.fffffff") + "+08:00",
                                                    CTQ_NAME = $"CC{item.Key}",
                                                    CTQ_VALUE = item.Value,
                                                    CTQ_LSL = "",
                                                    CTQ_USL = "",
                                                    PROCESS_END_TIME = serverTimeResult.Now.ToString("yyyy-MM-ddTHH:mm:ss.fffffff") + "+08:00",
                                                    SUPPLIER_NAME = stationConfig.DataInfo.SUPPLIER_NAME,
                                                    COMMODITY_TYPE = stationConfig.DataInfo.COMMODITY_TYPE,
                                                    REVISION = stationConfig.DataInfo.REVISION,
                                                    WO = wo[i],
                                                    MFG_LOT = stationConfig.DataInfo.MFG_LOT,
                                                    MFG_ASSY_LINE = stationConfig.DataInfo.MFG_ASSY_LINE,
                                                    PROCESS_OUTCOME = "Pass",
                                                    PROCESS_MACHINE_ID = stationConfig.DataInfo.PROCESS_MACHINE_ID,
                                                    CTQ_UNIT_OF_MEASURE = "mm",
                                                    ERROR_MESSAGE = assyPress ? "" : "CC OOS",
                                                });
                                            }
                                            DFC.Add(new DataFormCtq
                                            {
                                                PPID = code,
                                                PROCESS_NAME = stationConfig.DataInfo.PROCESS_NAME,
                                                PROCESS_START_TIME = _LastMesCheckTime[i].ToString("yyyy-MM-ddTHH:mm:ss.fffffff") + "+08:00",
                                                CTQ_NAME = "Assy_Pressure",
                                                CTQ_VALUE = Math.Round(double.Parse(assypress), 3).ToString(),
                                                CTQ_LSL = currentProduct.GlobalParamEx.DownPressure.PressureDownLimit.ToString("F3"),
                                                CTQ_USL = currentProduct.GlobalParamEx.DownPressure.PressureUpLimit.ToString("F3"),
                                                PROCESS_END_TIME = serverTimeResult.Now.ToString("yyyy-MM-ddTHH:mm:ss.fffffff") + "+08:00",
                                                SUPPLIER_NAME = stationConfig.DataInfo.SUPPLIER_NAME,
                                                COMMODITY_TYPE = stationConfig.DataInfo.COMMODITY_TYPE,
                                                REVISION = stationConfig.DataInfo.REVISION,
                                                WO = wo[i],
                                                MFG_LOT = stationConfig.DataInfo.MFG_LOT,
                                                MFG_ASSY_LINE = stationConfig.DataInfo.MFG_ASSY_LINE,
                                                PROCESS_OUTCOME = assyPress ? "Pass" : "Fail",
                                                PROCESS_MACHINE_ID = stationConfig.DataInfo.PROCESS_MACHINE_ID,
                                                CTQ_UNIT_OF_MEASURE = "kg",
                                                ERROR_MESSAGE = assyPress ? "" : "Assy_Pressure OOS"
                                            });
                                            bool recordResult = RecordStationResult(i, DFC, ProductMainSN[i], serverTimeResult.Now.Subtract(_LastMesCheckTime[i]).TotalSeconds, _LastMesCheckTime[i], stationConfig.SaveCsvPath);
                                            if (recordResult)
                                            {
                                                SendTaskMessage($"{i}:{stationConfig.DeviceName}产品记录保存成功", MessageLevel.Debug);
                                                //上传数据
                                                try
                                                {
                                                    DateTime dt = DateTime.Now;
                                                    string filename = $"{ProductMainSN[i]}_{dt.ToString("yyyyMMddHHmmss")}";
                                                    var device = _configService.GetDeviceInfo();
                                                    (bool isSuc, string resp) = await _mesService.SendFtpFileAsync(ProductMainSN[i], filename);
                                                    if (isSuc)
                                                    {
                                                        LogHelper.WriteLogMes($"上传数据成功");
                                                        SendTaskMessage($"上传数据成功", MessageLevel.Debug);
                                                        string filePath = $"D:\\image\\Recored\\{dt.ToString("yyyy-MM")}\\{dt.ToString("MM-dd")}\\{currentProduct.Name}\\{ProductMainSN[i]}";
                                                        //复制csv
                                                        string source_csv = $"{stationConfig.SaveCsvPath}\\{dt.ToString("yyyy-MM")}\\{i}_{stationConfig.DeviceName}_{dt.ToString("yyyy-MM-dd")}.csv";
                                                        string target_csv = Path.Combine(filePath, Path.GetFileName(source_csv)); ;
                                                        File.Copy(source_csv, target_csv, true);
                                                        //复制log
                                                        string source_log = $"..\\Log\\LogInfo\\{dt.ToString("yyyy-MM")}\\{dt.ToString("yyyy-MM-dd")}.txt";
                                                        string target_log = Path.Combine(filePath, Path.GetFileName(source_log));
                                                        File.Copy(source_log, target_log, true);
                                                        CompressionImage(filePath, filename, device.Station, device.FixtureId);
                                                    }
                                                    else
                                                    {
                                                        LogHelper.WriteLogMes($"上传数据失败");
                                                        SendTaskMessage($"上传数据失败", MessageLevel.Error);
                                                    }
                                                }
                                                catch (Exception ex)
                                                {
                                                    SendTaskMessage($"上传数据时出错:{ex.Message}", MessageLevel.Error);
                                                    LogHelper.WriteLogError($"上传数据时出错", ex);
                                                }
                                            }
                                            else
                                            {
                                                SendTaskMessage($"{i}:{stationConfig.DeviceName}产品记录保存失败", MessageLevel.Error);
                                            }
                                        }
                                        else
                                        {
                                            SendTaskMessage($"{i}:{stationConfig.DeviceName}工位未配置保存路径，无法保存产品记录", MessageLevel.Error);
                                        }
                                    }
                                    else
                                    {
                                        SendTaskMessage($"{i}:{stationConfig.DeviceName}工位未配置保存产品记录", MessageLevel.Debug);
                                    }

                                    mes_cc.Clear();
                                    return;
                                }
                                else
                                {
                                    SendTaskMessage($"{i}过站检查信号：state={state}，处理为默认状态", MessageLevel.Alarm);
                                    await plc.WriteNodeAsync(string.Format(addressConfig.Out_MesStatus.Address, i), (Int16)0);
                                    return;
                                }
                            }
                        }
                    }
                    //开始/停止 组装/锁附
                    for (int i = 0; i < 7; i++)
                    {
                        //开始组装
                        if (string.Format(addressConfig.In_WorkStart.Address, i).Contains(tuple.nodeId))
                        {
                            if (tuple.value is Int16 state)
                            {
                                if (_LastWorkStart[i] != state)
                                {
                                    _LastWorkStart[i] = state;
                                }
                                else
                                {
                                    return;
                                }
                                var code = plc.ReadNode<string>(string.Format(addressConfig.In_Code.Address, i));

                                if (state == 1)
                                {
                                    SendTaskMessage($"收到开始保压信号[{i}]...", MessageLevel.Debug);
                                    // 开始采集压力值
                                    StartPressureCollection(currentProduct.Name, code, i);
                                }
                                else
                                {
                                    SendTaskMessage($"收到关闭开始保压信号[{i}]...", MessageLevel.Debug);
                                }
                            }
                        }
                        //停止组装
                        else if (string.Format(addressConfig.In_WorkDone.Address, i).Contains(tuple.nodeId))
                        {
                            if (tuple.value is Int16 state)
                            {
                                if (_LastWorkDone[i] != state)
                                {
                                    _LastWorkDone[i] = state;
                                }
                                else
                                {
                                    return;
                                }
                                if (state == 1)
                                {
                                    SendTaskMessage($"收到停止压力信号[{i}]...", MessageLevel.Debug);
                                    //获取当前锁付点
                                    //var screwPoint = currentProduct.ScrewPoints.FirstOrDefault(p => p.Number == positionIndex);
                                    //读取压力值
                                    float pressure = plc.ReadNode<float>(string.Format(addressConfig.In_PressureValue.Address, i));
                                    currentPressure[i] = pressure;
                                    SendTaskMessage($"[{i}]压力：{pressure}", MessageLevel.Info);

                                    await plc.WriteNodeAsync(string.Format(addressConfig.In_WorkDone.Address, i), (Int16)0);
                                    var code = plc.ReadNode<string>(string.Format(addressConfig.In_Code.Address, i));
                                    // 停止采集压力并保存
                                    await StopAndSavePressureCollectionAsync(currentProduct.Name, code, i);
                                }
                                else
                                {
                                    SendTaskMessage($"停止压力信号[{i}]已关闭", MessageLevel.Alarm);
                                }
                            }
                        }
                    }
                }
            }
            catch (Exception ex)
            {
                SendTaskMessage(ex.Message, MessageLevel.Error);
            }
        }

        #endregion

        #region 方法

        private void SendTaskMessage(string msg, MessageLevel level)
        {
            App.Current.Dispatcher.Invoke(() =>
            {
                _eventAggregator.GetEvent<TaskMessageNotification>().Publish(new Models.MessageStruct() { Message = msg, level = level });
            });
        }

        #region Pressure collection helpers
        public void InitPressure()
        {
            for (int i = 0; i < _pressureSamples.Length; i++)
            {
                _pressureSamples[i] = new List<(DateTime, float)>();
            }
            for (int i = 0; i < _pressureCts.Length; i++)
            {
                _pressureCts[i] = new CancellationTokenSource();
            }
            for (int i = 0; i < _pressureTimeoutCts.Length; i++)
            {
                _pressureTimeoutCts[i] = new CancellationTokenSource();
            }
            for (int i = 0; i < _pressureLinkedCts.Length; i++)
            {
                _pressureLinkedCts[i] = new CancellationTokenSource();
            }
        }
        /// <summary>
        /// 开始采集压力值
        /// </summary>
        /// <param name="productName">配方名称</param>
        /// <param name="productCode">产品编号</param>
        /// <param name="Index">编号</param>
        private void StartPressureCollection(string productName, string productCode, int Index)
        {
            try
            {
                // cancel existing if any
                //_pressureCts[Index]?.Cancel();
                //_pressureTimeoutCts[Index]?.Cancel();
                //_pressureLinkedCts[Index]?.Dispose();
                _pressureSamples[Index]?.Clear();

                _pressureCts[Index] = new CancellationTokenSource();
                _pressureTimeoutCts[Index] = new CancellationTokenSource();

                // timeout after configured seconds
                _pressureTimeoutCts[Index].CancelAfter(TimeSpan.FromSeconds(_pressureMaxDurationSeconds));

                // link tokens so either stop or timeout cancels
                _pressureLinkedCts[Index] = CancellationTokenSource.CreateLinkedTokenSource(_pressureCts[Index].Token, _pressureTimeoutCts[Index].Token);

                var token = _pressureLinkedCts[Index].Token;
                var addressConfig = _configService.GetPlcAddresses();
                var plc = _plcService.GetPlcByNumber(addressConfig.PlcNo) as OpcUaClientPLC;
                if (plc == null || !plc.IsConnected) return;
                Task.Run(async () =>
                {
                    SendTaskMessage($"Pressure collection started for position {Index}", MessageLevel.Debug);
                    while (!token.IsCancellationRequested)
                    {
                        try
                        {
                            float pressure = plc.ReadNode<float>(string.Format(addressConfig.In_PressureValue.Address, Index));
                            lock (_pressureSamples[Index])
                            {
                                _pressureSamples[Index].Add((DateTime.Now, pressure));
                            }
                        }
                        catch (Exception ex)
                        {
                            LogHelper.WriteLogError("采集压力值时出错", ex);
                        }
                        await Task.Delay(_pressureSampleIntervalMs);
                    }
                    // if cancelled due to timeout
                    if (_pressureTimeoutCts[Index].IsCancellationRequested && !_pressureCts[Index].IsCancellationRequested)
                    {
                        SendTaskMessage("Pressure collection timed out, saving collected data.", MessageLevel.Alarm);
                        await StopAndSavePressureCollectionAsync(productName, productCode, Index);
                    }
                }, token);
            }
            catch (Exception ex)
            {
                LogHelper.WriteLogError("StartPressureCollection error", ex);
            }
        }

        /// <summary>
        /// 停止采集并保存压力数据
        /// </summary>
        /// <param name="productName"></param>
        /// <param name="productCode"></param>
        /// <param name="positionIndex"></param>
        /// <returns></returns>
        private async Task StopAndSavePressureCollectionAsync(string productName, string productCode, int Index)
        {
            try
            {
                // cancel sampling
                //_pressureCts[Index]?.Cancel();
                // allow worker to observe cancel
                await Task.Delay(50);

                List<(DateTime Timestamp, float Value)> snapshot;
                lock (_pressureSamples[Index])
                {
                    snapshot = new List<(DateTime, float)>(_pressureSamples[Index]);
                }

                if (snapshot.Count == 0)
                {
                    SendTaskMessage("No pressure samples collected.", MessageLevel.Info);
                    return;
                }

                // save to file under configured path
                try
                {
                    //获取系统参数
                    var systemConfig = _configService.GetSystemConfiguration();
                    if (systemConfig.PressureSensorConfig == null || systemConfig.PressureSensorConfig.Count <= 0)
                    {
                        SendTaskMessage("当前没有配置任何压力传感器！", MessageLevel.Alarm);
                        return;
                    }
                    //获取当前压力传感器配置
                    var pressureSensorConfig = systemConfig.PressureSensorConfig.FirstOrDefault(p => p.SensorId == Index);
                    if (pressureSensorConfig == null)
                    {
                        SendTaskMessage($"当前压力传感器配置不存在！- {Index}", MessageLevel.Alarm);
                        return;
                    }
                    //PressureFinishNotification : Prism.Events.PubSubEvent<(bool IsSuccess, int Index, (DateTime Timestamp, float Value)[] values,string SavePath )>
                    string basePath = pressureSensorConfig?.PressureCurvePath ?? Environment.GetFolderPath(Environment.SpecialFolder.MyDocuments);
                    string datePath = DateTime.Now.ToString("yyyy-MM") + "\\" + DateTime.Now.ToString("yyyy-MM-dd") + "\\";
                    string dirPath = Path.Combine(basePath, datePath, productName ?? "UnknownProduct", productCode ?? DateTime.Now.ToString("yyyyMMddHHmmssfff"));
                    if (!Directory.Exists(dirPath)) Directory.CreateDirectory(dirPath);
                    string csvfileName = $"pressure-{productCode}-{Index}-{DateTime.Now.ToString("HHmmss")}.csv";
                    string csvPath = Path.Combine(dirPath, csvfileName);
                    string pngfileName = $"pressure-{productCode}-{Index}-{DateTime.Now.ToString("HHmmss")}.png";
                    string pngPath = Path.Combine(dirPath, pngfileName);
                    if (!pressureSensorConfig.IsSavePressureCurve)
                    {
                        csvPath = string.Empty;
                        pngPath = string.Empty;
                    }

                    App.Current.Dispatcher.Invoke(() =>
                    {
                        _eventAggregator.GetEvent<PressureFinishNotification>().Publish((true, Index, snapshot.ToArray(), pngPath));
                    });
                    //判断是否保存锁付曲线
                    if (pressureSensorConfig.IsSavePressureCurve)
                    {
                        if (!string.IsNullOrEmpty(csvPath))
                        {
                            var sb = new StringBuilder();
                            sb.AppendLine("Timestamp,Value");
                            foreach (var s in snapshot)
                            {
                                sb.AppendLine($"{s.Timestamp:O},{s.Value}");
                            }

                            File.WriteAllText(csvPath, sb.ToString());
                            SendTaskMessage($"Pressure samples saved to {csvPath}", MessageLevel.Debug);
                        }

                    }
                }
                catch (Exception ex)
                {
                    LogHelper.WriteLogError("保存压力采样文件时出错", ex);
                    SendTaskMessage("保存压力采样文件时出错: " + ex.Message, MessageLevel.Error);
                }
            }
            catch (Exception ex)
            {
                LogHelper.WriteLogError("StopAndSavePressureCollectionAsync error", ex);
            }
            finally
            {
                try
                {
                    _pressureLinkedCts[Index]?.Cancel();
                    _pressureLinkedCts[Index]?.Dispose();
                    _pressureTimeoutCts[Index]?.Dispose();
                    _pressureCts[Index]?.Dispose();
                    _pressureSamples[Index]?.Clear();
                }
                catch { }
            }
        }
        #endregion

        private async void DoYieldTime(object state)
        {
            try
            {
                //获取当前产品
                var currentproduct = _productService.GetCurrentProduct();
                if (currentproduct == null) return;
                TotalQuantity = await _systemDatabaseService.GetOverallProductionAsync(currentproduct.Name);
                TotalQuantityToday = await _systemDatabaseService.GetTodayProductionAsync(currentproduct.Name);
                CurrentUPH = await _systemDatabaseService.GetLastHourProductionAsync(currentproduct.Name);
                //
                ThrowNumber = await _systemDatabaseService.GetThrowNumberAsync();
                NgNumber = await _systemDatabaseService.GetNGProductionAsync(currentproduct.Name);
                Yield = ((double)TotalQuantityToday - (double)NgNumber) / (double)TotalQuantityToday * 100;
            }
            catch (Exception)
            {

            }
        }

        #region vm启动检测

        /// <summary>
        /// 杀死所有VM有关进程
        /// </summary>
        public void KillVMProcess()
        {
            KillProcess("VisionMasterServerApp");
            KillProcess("VisionMaster");
            KillProcess("VmModuleProxy.exe");
            KillProcess("vServerApp.exe");
        }

        /// <summary>
        /// 杀死指定进程名的进程
        /// </summary>
        /// <param name="strKillName"></param>
        public void KillProcess(string strKillName)
        {
            foreach (System.Diagnostics.Process p in System.Diagnostics.Process.GetProcesses())
            {
                if (p.ProcessName.Contains(strKillName))
                {
                    try
                    {
                        p.Kill();
                        p.WaitForExit();
                    }
                    catch (Exception ex)
                    {
                        LogHelper.WriteLogError($"杀死进程:{strKillName}时失败！", ex);
                    }
                }
            }
        }
        #endregion

        /// <summary>
        /// 记录工位的结果，其他工位要存储的数据项按照键值对集合的形式传入，键为数据项名称，值为数据项的值
        /// </summary>
        /// <param name="stationIndex"></param>
        /// <param name="dfcs"></param>
        /// <param name="productMainSN"></param>
        /// <param name="ct"></param>
        /// <param name="timestamp"></param>
        /// <param name="savePath"></param>
        /// <param name="isFirstEnter"></param>
        /// <returns></returns>
        private bool RecordStationResult(int stationIndex, IEnumerable<DataFormCtq> dfcs, string productMainSN, double ct, DateTime timestamp, string savePath, bool isFirstEnter = true)
        {
            try
            {
                //获取当前工位的配置
                var stationConfig = _configService.GetDeviceInfo(stationIndex);
                if (stationConfig == null) return false;
                //如果保存路径为空，则不保存
                if (string.IsNullOrEmpty(savePath)) return false;
                string fullPath = savePath;
                //如果保存路径是一个文件路径，则直接保存，否则按照工位和日期进行保存
                if (File.Exists(savePath) || Path.HasExtension(savePath))
                {
                    fullPath = savePath;
                    //如果路径不存在，则创建
                    // 创建目录
                    string directory = Path.GetDirectoryName(fullPath);
                    if (!string.IsNullOrEmpty(directory) && !Directory.Exists(directory))
                    {
                        Directory.CreateDirectory(directory);
                    }
                }
                else
                {
                    //结果保存至CSV文件，文件名格式：savePath\yyyy-MM\工位编号_工位名称_yyyy-MM-dd.csv
                    string datePath = timestamp.ToString("yyyy-MM") + "\\";
                    string dirPath = Path.Combine(savePath, datePath);
                    if (!Directory.Exists(dirPath)) Directory.CreateDirectory(dirPath);
                    string fileName = $"{stationIndex}_{stationConfig.DeviceName}_{timestamp.ToString("yyyy-MM-dd")}.csv";
                    fullPath = Path.Combine(dirPath, fileName);
                }
                StringBuilder sb = new StringBuilder();
                if (!File.Exists(fullPath))
                {
                    sb.Append("PPID,PROCESS_NAME,PROCESS_START_TIME,CTQ_NAME,CTQ_VALUE,CTQ_LSL,CTQ_USL,PROCESS_END_TIME,SUPPLIER_NAME,COMMODITY_TYPE,REVISION,WO#,MFG_LOT#," +
                        "MFG_ASSY_LINE,PROCESS_OUTCOME,PROCESS_MACHINE_ID,CTQ_UNIT_OF_MEASURE,ERROR_MESSAGE");
                    sb.AppendLine();
                }
                if (dfcs == null || dfcs.Count() == 0)
                {
                    return false;
                }
                foreach (var dfc in dfcs)
                {
                    sb.Append($"{dfc.PPID},{dfc.PROCESS_NAME},{dfc.PROCESS_START_TIME},{dfc.CTQ_NAME},{dfc.CTQ_VALUE},{dfc.CTQ_LSL},{dfc.CTQ_USL},{dfc.PROCESS_END_TIME},{dfc.SUPPLIER_NAME},{dfc.COMMODITY_TYPE},{dfc.REVISION},{dfc.WO},{dfc.MFG_LOT},{dfc.MFG_ASSY_LINE},{dfc.PROCESS_OUTCOME},{dfc.PROCESS_MACHINE_ID},{dfc.CTQ_UNIT_OF_MEASURE},{dfc.ERROR_MESSAGE}");
                    sb.AppendLine();
                }
                // 使用 StreamWriter 以追加模式打开文件
                StreamWriter sw = new StreamWriter(fullPath, true, Encoding.UTF8);
                sw.Write(sb.ToString());
                sw.Close();
                sw.Dispose();
                return true;
            }
            catch (Exception ex)
            {
                if (!isFirstEnter)
                {
                    return false;
                }
                LogHelper.WriteLogError("记录其他工位结果时出错!", ex);
                //我希望在这里生成一个临时文件来保存这次的记录，因为如果本地文件被打开时可能会导致无法写入，如果不保存的话可能会丢失这次的记录，所以我想在这里生成一个临时文件来保存这次的记录
                //生成临时文件的路径，格式为savePath\yyyy-MM\工位编号_yyyy-MM-dd_temp\工位编号_yyyy-MM-dd_HH-mm-ss-fff_temp.csv
                string datePath = timestamp.ToString("yyyy-MM") + "\\";
                string tempDirPath = Path.Combine(savePath, datePath, $"{stationIndex}_{timestamp.ToString("yyyy-MM-dd")}_temp");
                string tempFileName = $"{stationIndex}_{timestamp.ToString("yyyy-MM-dd_HH-mm-ss-fff")}_temp.csv";
                RecordStationResult(stationIndex, dfcs, productMainSN, ct, timestamp, tempFileName, false);
                return false;
            }
        }

        #region 压缩图片文件夹
        /// <summary>
        /// 压缩文件
        /// </summary>
        /// <param name="sourcePath">原路径</param>
        /// <param name="zipname">压缩后文件的名称</param>
        /// <param name="station">mes中的station</param>
        /// <param name="fixid">mes中的fixtureID</param>
        public async void CompressionImage(string sourcePath, string zipname, string station, string fixid)
        {
            string zipPath = "";
            try
            {
                SendTaskMessage($"开始压缩文件", MessageLevel.Info);
                await Task.Run(() =>
                {
                    zipPath = $"Z:\\{station}\\{fixid}\\{DateTime.Now.ToString("yyyyMMdd")}\\{zipname}.zip";//生成的zip文件路径
                    string path = $"Z:\\{station}\\{fixid}\\{DateTime.Now.ToString("yyyyMMdd")}";
                    if (!Directory.Exists(path))
                    {
                        Directory.CreateDirectory(path);
                    }

                    ZipFile.CreateFromDirectory(sourcePath, zipPath);
                });
            }
            catch (Exception ex)
            {
                LogHelper.WriteLogError($"压缩文件时出错", ex);
            }
        }

        #endregion
        #endregion
    }
}