Display_D_HP/TeamAAS-VM/Core/Management.cs

using Cognex.VisionPro.ToolBlock;
using MahApps.Metro.Controls;
using NPOI.OpenXmlFormats.Vml;
using Opc.Ua;
using Org.BouncyCastle.Crypto;
using Prism.Events;
using Prism.Ioc;
using Prism.Mvvm;
using Prism.Regions;
using SqlSugar;
using System;
using System.Collections.Generic;
using System.Collections.ObjectModel;
using System.Drawing;
using System.IO;
using System.IO.Compression;
using System.Linq;
using System.Net.Sockets;
using System.Security.Claims;
using System.Text;
using System.Threading;
using System.Threading.Tasks;
using System.Web;
using System.Web.UI.WebControls;
using System.Windows.Media;
using Team.FFFeederService.Interfaces;
using TeamAAS_VP.Core.PLCs;
using TeamAAS_VP.Core.ScrewDriver;
using TeamAAS_VP.Data;
using TeamAAS_VP.Enums;
using TeamAAS_VP.Events;
using TeamAAS_VP.Interfaces;
using TeamAAS_VP.Models;
using TeamAAS_VP.Models.PLC;
using TeamAAS_VP.Models.Torque;
using TeamAAS_VP.Resources.Languages;
using TeamAAS_VP.Views.Product;
using TouchSocket.Core;
using TouchSocket.SerialPorts;
using TouchSocket.Sockets;
using Timer = System.Threading.Timer;

namespace TeamAAS_VP.Core
{
    public class Management : BindableBase
    {
        #region 字段
        IRegionManager _regionManager;
        IEventAggregator _eventAggregator;
        IContainerProvider _container;
        IConfigService _configService;
        IRobotService _robotService;
        ICameraService _cameraService;
        IFeederService _feederService;
        IPlcService _plcService;
        ILightManagerService _lightManagerService;
        IProductService _productService;
        ICalibrationService _calibrationService;
        IRemoteCommandService _remoteCommandService;
        ISystemDatabaseService _systemDatabaseService;
        IMesService _mesService;

        Timer yieldtimer;
        private DateTime StartTime = DateTime.Now;
        SerialPortClient client;
        // Pressure collection
        /// <summary>
        /// 压力采集信号控制CTS
        /// </summary>
        private CancellationTokenSource[] _pressureCts = new CancellationTokenSource[100];
        /// <summary>
        /// 压力采集超时CTS
        /// </summary>
        private CancellationTokenSource[] _pressureTimeoutCts = new CancellationTokenSource[100];
        /// <summary>
        /// 压力采集CTS
        /// </summary>
        private CancellationTokenSource[] _pressureLinkedCts = new CancellationTokenSource[100];
        /// <summary>
        /// 压力数据集合
        /// </summary>
        private List<(DateTime Timestamp, float Value)> _pressureSamples = new List<(DateTime, float)>();
        /// <summary>
        /// 采样间隔毫秒
        /// </summary>
        private int _pressureSampleIntervalMs = 50; //采样间隔毫秒
        /// <summary>
        /// 超时自动停止秒数
        /// </summary>
        private int _pressureMaxDurationSeconds = 30; //超时自动停止秒数
        DateTime[] StartCtqTime = new DateTime[3];//开始采集Ctq数据的时间

        /// <summary>
        /// 上次执行上传csv的日期
        /// </summary>
        private DateTime _lastCompressDate = DateTime.MinValue;
        /// <summary>
        /// 当天是否上传过csv
        /// </summary>
        private bool _hasCompressedToday = false;
        List<LockResult> lockResultsAll = new List<LockResult>();//一个产品的总结果
        string productSn = "";//产品sn
        DateTime StartScrewTime = DateTime.Now;//开始锁附的时间
        #endregion

        #region 属性

        /// <summary>
        /// 当前顶部显示的运行模式
        /// </summary>
        private RunDisplayMode _CurrentDisplayMode = RunDisplayMode.Unknown;
        public RunDisplayMode CurrentDisplayMode
        {
            get { return _CurrentDisplayMode; }
            set { SetProperty(ref _CurrentDisplayMode, value); }
        }

        private ObservableCollection<ShowRender> _Renders;

        /// <summary>
        /// 显示界面
        /// </summary>
        public ObservableCollection<ShowRender> Renders
        {
            get { return _Renders; }
            set { SetProperty(ref _Renders, value); }
        }

        public BgCommunicate BgCommunicate { get; private set; }

        public BgModbusTcpCommunicate BgModbusTcpCommunicate { get; private set; }

        private ObservableCollection<StatusInfo> _Status = new ObservableCollection<StatusInfo>();

        /// <summary>
        /// 状态栏集合
        /// </summary>
        public ObservableCollection<StatusInfo> Status
        {
            get { return _Status; }
            set { SetProperty(ref _Status, value); }
        }

        private Int64 _TotalQuantity;
        /// <summary>
        /// 总产量
        /// </summary>
        public Int64 TotalQuantity
        {
            get { return _TotalQuantity; }
            set { SetProperty(ref _TotalQuantity, value); }
        }

        private Int64 _TotalQuantityToday;
        /// <summary>
        /// 当天的总产量
        /// </summary>
        public Int64 TotalQuantityToday
        {
            get { return _TotalQuantityToday; }
            set { SetProperty(ref _TotalQuantityToday, value); }
        }

        private Int64 _CurrentUPH;
        /// <summary>
        /// 当前的UPH
        /// </summary>
        public Int64 CurrentUPH
        {
            get { return _CurrentUPH; }
            set { SetProperty(ref _CurrentUPH, value); }
        }

        private Int64 _ThrowNumber;
        /// <summary>
        /// 抛料数
        /// </summary>
        public Int64 ThrowNumber
        {
            get { return _ThrowNumber; }
            set { SetProperty(ref _ThrowNumber, value); }
        }

        private Int64 _NgNumber;
        /// <summary>
        /// ng数量
        /// </summary>
        public Int64 NgNumber
        {
            get { return _NgNumber; }
            set { SetProperty(ref _NgNumber, value); }
        }

        private double _Yield;
        /// <summary>
        /// 良率
        /// </summary>
        public double Yield
        {
            get { return _Yield; }
            set { SetProperty(ref _Yield, value); }
        }

        private XYD_ScrewDriver _ScrewDriver;
        public XYD_ScrewDriver ScrewDriver
        {
            get { return _ScrewDriver; }
            set { SetProperty(ref _ScrewDriver, value); }
        }

        public Dictionary<string, object> BackupObject { get; set; } = new Dictionary<string, object>();

        private string _SignalValue = "0";
        /// <summary>
        /// 扭力测量仪获取的最大值
        /// </summary>
        public string SignalValue
        {
            get { return _SignalValue; }
            set { SetProperty(ref _SignalValue, value); }
        }

        private NumberStatistics _NumStatistics;
        /// <summary>
        /// 数量（批头、吸嘴、供料器）
        /// </summary>
        public NumberStatistics NumStatistics
        {
            get { return _NumStatistics; }
            set { SetProperty(ref _NumStatistics, value); }
        }

        private double _CTtime;
        /// <summary>
        /// ct
        /// </summary>
        public double CTtime
        {
            get { return _CTtime; }
            set { SetProperty(ref _CTtime, value); }
        }

        private bool _TorqueStatus = false;

        public bool TorqueStatus
        {
            get { return _TorqueStatus; }
            set { _TorqueStatus = value; }
        }

        private ObservableCollection<DataFormCtq> _dfc = new ObservableCollection<DataFormCtq>();
        /// <summary>
        /// CTQ数据集合
        /// </summary>
        public ObservableCollection<DataFormCtq> DFC
        {
            get { return _dfc; }
            set { SetProperty(ref _dfc, value); }
        }

        private ObservableCollection<ProductModel> _ProductList;
        public ObservableCollection<ProductModel> ProductList
        {
            get { return _ProductList; }
            set { SetProperty(ref _ProductList, value); }
        }
        #endregion

        #region 命令

        #endregion

        #region 事件

        #endregion

        public Management(IRegionManager regionManager, IEventAggregator ea, IContainerProvider container, IConfigService configService,
            IRobotService robotService, ICameraService cameraService, IFeederService feederService, IPlcService plcService, IProductService productService,
            ICalibrationService calibrationService, IRemoteCommandService remoteCommandService, ISystemDatabaseService systemDatabaseService, ILightManagerService lightManagerService,
            IMesService mesService)
        {
            _regionManager = regionManager;
            _eventAggregator = ea;
            _container = container;
            _configService = configService;
            _robotService = robotService;
            _cameraService = cameraService;
            _feederService = feederService;
            _plcService = plcService;
            _calibrationService = calibrationService;
            yieldtimer = new Timer(DoYieldTime, null, 10000, 1000);
            Renders = new ObservableCollection<ShowRender>();
            _productService = productService;
            _remoteCommandService = remoteCommandService;
            _systemDatabaseService = systemDatabaseService;
            _lightManagerService = lightManagerService;
            _mesService = mesService;
            _eventAggregator.GetEvent<CurrentStatusNotification>().Subscribe(CurrentRunStatus);
        }

        #region 读取配置参数
        public async Task ReadConfig()
        {
            await ReadNumber();
        }
        /// <summary>
        /// 读取数量配置
        /// </summary>
        public async Task ReadNumber()
        {
            try
            {
                NumStatistics = new NumberStatistics();
                var latestHeadChangeRecord = await _systemDatabaseService.GetLatestHeadChangeRecordAsync();
                if (latestHeadChangeRecord != null)
                {
                    NumStatistics.HeaderNum = latestHeadChangeRecord.CurrentLockCount;
                }

                var latestNozzleChangeRecord = await _systemDatabaseService.GetLatestNozzleChangeRecordAsync();
                if (latestNozzleChangeRecord != null)
                {
                    NumStatistics.NozzleNum = latestNozzleChangeRecord.CurrentLockCount;
                }

                NumStatistics.Feeder1Num = _configService.GetRemainingCountByFeederNumber(1);
                NumStatistics.Feeder2Num = _configService.GetRemainingCountByFeederNumber(2);

            }
            catch (Exception ex)
            {
                NumStatistics = new NumberStatistics();
                LogHelper.WriteLogError("加载数量配置文件时出错！", ex);
            }
        }
        #endregion

        #region 初始化硬件模块

        /// <summary>
        /// 初始化Feeder
        /// </summary>
        /// <returns></returns>
        public async Task<(bool IsSucceed, string Msg)> InitFeeders()
        {
            var feeders = _configService.GetAllFeeders();
            StringBuilder sb = new StringBuilder();
            foreach (var item in feeders)
            {
                _feederService.CreateFeeder(item.Id, item.FeederNo, item.FeederName, item.IP, item.Port, item.FeederBrand);
                var feeder = _feederService.GetFeeder(item.Id);
                Status.Add(new StatusInfo(item.Id, item.FeederName + $"{Lang.未连接}", new SolidColorBrush(Colors.Red)));
                try
                {
                    feeder.FeederConnectionStatusChanged += Management_FeederConnectionStatusChanged;
                    await feeder.ConnectAsync();     //连接Feeder
                    //SendTaskMessage($"{item.FeederName}已连接!", MessageLevel.Debug);
                }
                catch (Exception ex)
                {
                    sb.AppendLine($"{item.FeederName}:{Lang.断开连接}![{ex.Message}]");
                    SendTaskMessage($"{item.FeederName}{Lang.断开连接}!", MessageLevel.Alarm);
                }
            }
            if (sb.Length == 0)
            {
                return (true, "");
            }
            else
            {
                return (false, sb.ToString());
            }
        }

        /// <summary>
        /// 初始化机器人
        /// </summary>
        /// <returns></returns>
        public async Task<(bool IsSucceed, string Msg)> InitRobots()
        {
            var robots = _configService.GetAllRobots();
            StringBuilder sb = new StringBuilder();
            foreach (var item in robots)
            {
                _robotService.CreateRobot(item.Id, item);

                try
                {
                    Status.Add(new StatusInfo(item.Id, item.RobotName + $"{Lang.未连接}", new SolidColorBrush(Colors.Red)));
                    var robot = _robotService.GetRobot(item.Id);
                    robot.ReceivedEvent += Management_ReceivedEvent;
                    robot.SendEvent += Management_SendEvent;
                    robot.ConnectedEvent += Management_ConnectedEvent;
                    robot.DisconnectedEvent += Management_DisconnectedEvent;
                    await robot.ConnectAsync();     //连接Robot
                    SendTaskMessage($"{item.RobotName}{Lang.已连接}!", MessageLevel.Debug);
                }
                catch (Exception ex)
                {
                    sb.AppendLine($"{item.RobotName}:{Lang.断开连接}![{ex.Message}]");
                    SendTaskMessage($"{item.RobotName}{Lang.断开连接}!", MessageLevel.Alarm);
                }
            }
            if (sb.Length == 0)
            {
                return (true, "");
            }
            else
            {
                return (false, sb.ToString());
            }
        }

        /// <summary>
        /// 初始化PLC
        /// </summary>
        /// <returns></returns>
        public async Task<(bool IsSucceed, string Msg)> InitPlc()
        {
            var plcs = _configService.GetAllPlcs();
            StringBuilder sb = new StringBuilder();
            foreach (var item in plcs)
            {
                try
                {
                    _plcService.CreatePlc(item.Id, item);
                    var plc = _plcService.GetPlc(item.Id);
                    Status.Add(new StatusInfo(item.Id, item.Name + $"{Lang.未连接}", new SolidColorBrush(Colors.Red)));
                    plc.ConnectChangedEvent += Management_PlcConnectChangedEvent;
                    await plc.ConnectAsync();     //连接PLC
                    //SendTaskMessage($"{item.Name}{Lang.已连接}!", MessageLevel.Debug);
                }
                catch (Exception ex)
                {
                    sb.AppendLine($"{item.Name}:{Lang.断开连接}![{ex.Message}]");
                    SendTaskMessage($"{item.Name}{Lang.断开连接}!", MessageLevel.Alarm);
                }
            }
            try
            {
                await WriteSystemParameterToPlcAsync(_configService.GetSystemConfiguration());
                RegisterPlcMonitorAddress();
            }
            catch (Exception ex)
            {
                LogHelper.WriteLogError(Lang.为PLC写入系统参数和订阅变量时出错, ex);
            }
            if (sb.Length == 0)
            {
                return (true, "");
            }
            else
            {
                return (false, sb.ToString());
            }
        }

        /// <summary>
        /// 初始化相机
        /// </summary>
        /// <returns></returns>
        public async Task<(bool IsSucceed, string Msg)> InitCameras()
        {
            var cameras = _configService.GetAllCameras();
            StringBuilder sb = new StringBuilder();
            foreach (var item in cameras)
            {

                try
                {
                    //Renders.Add(new ShowRender() { Id = item.Id, CameraName = item.CameraName });
                    _cameraService.CreateCamera(item.Id, item);
                    var camera = _cameraService.GetCamera(item.Id);
                    Status.Add(new StatusInfo(item.Id, item.CameraName + $"{Lang.未连接}", new SolidColorBrush(Colors.Red)));
                    camera.CameraConnectChangedEvent += Management_CameraConnectChangedEvent;
                    try
                    {
                        if (await camera.OpenDeviceAsync())
                        {
                            SendTaskMessage($"{item.CameraName}{Lang.已连接}!", MessageLevel.Debug);
                        }
                        else
                        {
                            SendTaskMessage($"{item.CameraName}{Lang.连接失败}!", MessageLevel.Alarm);
                            sb.AppendLine($"{item.CameraName}:{Lang.连接失败}!");
                        }
                    }
                    catch (Exception ex)
                    {
                        SendTaskMessage($"{item.CameraName}{ex.Message}!", MessageLevel.Alarm);
                        sb.AppendLine($"{item.CameraName}:{ex.Message}!");
                    }

                }
                catch (Exception ex)
                {
                    SendTaskMessage($"{item.CameraName}{Lang.连接失败}!", MessageLevel.Alarm);
                    sb.AppendLine($"{item.CameraName}:{Lang.连接失败}!:{ex.Message}");
                }

            }
            //_container.Resolve<ShowVisionRenderViewModel>().Renders = Renders;

            if (sb.Length == 0)
            {
                return (true, "");
            }
            else
            {
                return (false, sb.ToString());
            }
        }

        /// <summary>
        /// 初始化光源控制器
        /// </summary>
        /// <returns></returns>
        public async Task<(bool IsSucceed, string Msg)> InitLightControllers()
        {
            var lightcontrollers = _configService.GetAllLightControllers();
            StringBuilder sb = new StringBuilder();
            foreach (var item in lightcontrollers)
            {
                try
                {
                    var lishtCtr = await _lightManagerService.RegisterControllerAsync(item.Id, item);
                    //var lightcontroller = _cameraService.GetLightController(item.Id);
                    //await lightcontroller.ConnectAsync();     //连接光源控制器
                    //SendTaskMessage($"{item.LightControllerName}{Lang.已连接}!", MessageLevel.Debug);
                }
                catch (Exception ex)
                {
                    //sb.AppendLine($"{item.LightControllerName}:{Lang.断开连接}![{ex.Message}]");
                    //SendTaskMessage($"{item.LightControllerName}{Lang.断开连接}!", MessageLevel.Alarm);
                }
            }
            if (lightcontrollers.Count > 0)
            {
                var result = await _lightManagerService.ConnectAllAsync();
                if (result)
                {
                    return (true, "");
                }
                else
                {
                    return (false, "Light Controller Connect Failed!");
                }
            }
            return (true, "");
            //if (sb.Length == 0)
            //{
            //    return (true, "");
            //}
            //else
            //{
            //    return (false, sb.ToString());
            //}
        }

        /// <summary>
        /// 初始化后台TCP服务器通讯
        /// </summary>
        public void InitBgTcp()
        {
            var config = _configService.GetBgTcp();
            try
            {
                BgCommunicate = new BgCommunicate(config);
                BgCommunicate.ConnectedEvent += BgCommunicate_ConnectedEvent;
                BgCommunicate.DisconnectedEvent += BgCommunicate_DisconnectedEvent;
                BgCommunicate.ReceivedEvent += BgCommunicate_ReceivedEvent;
                BgCommunicate.SendEvent += BgCommunicate_SendEvent;
                BgCommunicate.StartListening();
                SendTaskMessage($"{Lang.已开启监听端口}：{config.Port}", MessageLevel.Debug);
            }
            catch (Exception ex)
            {
                SendTaskMessage($"{Lang.未开启监听端口}：{config.Port}", MessageLevel.Error);
                LogHelper.WriteLogError(Lang.开启后台服务器通讯时出错, ex);
            }
        }

        /// <summary>
        /// 初始化后台ModbusTCP从站
        /// </summary>
        public void InitModbusTcp()
        {
            try
            {
                var config = _configService.GetBgModbusTcp();
                BgModbusTcpCommunicate = new BgModbusTcpCommunicate(config);
                if (config.IsEnabled)
                {
                    BgModbusTcpCommunicate.Listen();
                    SendTaskMessage($"Start Modbus Tcp Slave：{BgModbusTcpCommunicate.IP}:{BgModbusTcpCommunicate.Port}:{BgModbusTcpCommunicate.SlaveID}", MessageLevel.Debug);
                }
            }
            catch (Exception ex)
            {
                SendTaskMessage($"No Start Modbus Tcp Slave：{ex.Message}", MessageLevel.Alarm);
                LogHelper.WriteLogError(Lang.开启后台ModbusTCP通讯时出错, ex);
            }
        }

        /// <summary>
        /// 初始化后台脚本
        /// </summary>
        public void InitBackgroundcript()
        {
            try
            {
                if (!Directory.Exists(FilePath.BackgroundScriptPath))
                {
                    Directory.CreateDirectory(FilePath.BackgroundScriptPath);
                }

                try
                {
                    string[] files = Directory.GetFiles(FilePath.BackgroundScriptPath);
                    List<string> ScriptFilesCollection = new List<string>();
                    foreach (string file in files)
                    {
                        string fileName = Path.GetFileName(file);
                        string fileExtension = Path.GetExtension(file);
                        if (fileExtension == ".cs")
                        {
                            ScriptFilesCollection.Add(file);
                        }
                    }
                    foreach (var item in ScriptFilesCollection)
                    {
                        try
                        {
                            string script = FileHelper.ReadFile(item);
                            SendTaskMessage($"{Lang.执行脚本}:{item}", MessageLevel.Info);
                            Task.Factory.StartNew(() =>
                            {
                                ScriptHelper.ExecuteScriptingAsync(script, _regionManager, _eventAggregator, _container, rst =>
                            {
                                if (!rst.Item1)
                                {
                                    foreach (var err in rst.Item2)
                                    {
                                        SendTaskMessage($"{Lang.后台脚本出错}:{err}", MessageLevel.Error);
                                    }
                                }
                            });
                            });
                        }
                        catch (Exception ex)
                        {
                            LogHelper.WriteLogError(string.Format(Lang.开启脚本时出错0, item), ex);
                        }
                    }
                }
                catch (Exception ex)
                {
                    LogHelper.WriteLogError(Lang.读取本地脚本文件列表时出错, ex);
                }
            }
            catch (Exception ex)
            {
                LogHelper.WriteLogError(Lang.开启后台脚本时出错, ex);
            }
        }

        /// <summary>
        /// 初始化电批
        /// </summary>
        /// <returns></returns>
        public async Task InitScrewDriver()
        {
            try
            {

                var screwDriverConfig = _configService.GetScrewDriverConfig();
                ScrewDriver = new XYD_ScrewDriver(screwDriverConfig.IPAdress, screwDriverConfig.Port);
                Status.Add(new StatusInfo(ScrewDriver.Id, Lang.电批未连接, new SolidColorBrush(Colors.Red)));
                ScrewDriver.ConnectStateChangedEvent += ScrewDriver_ConnectStateChangedEvent;
                ScrewDriver.SendTimeout = screwDriverConfig.SendTimeout;
                screwDriverConfig.ReceiveTimeout = screwDriverConfig.ReceiveTimeout;
                var isConnected = await ScrewDriver.ConnectAsync();
                if (isConnected)
                {
                    SendTaskMessage(Lang.电批已连接, MessageLevel.Debug);
                }
                else
                {
                    SendTaskMessage(Lang.电批连接失败, MessageLevel.Error);
                }
            }
            catch (Exception ex)
            {
                SendTaskMessage(string.Format(Lang.电批连接失败0, ex.Message), MessageLevel.Alarm);
                LogHelper.WriteLogError(Lang.连接电批时出错, ex);
            }
        }

        /// <summary>
        /// 初始化扭力测量仪
        /// </summary>
        /// <returns></returns>
        public async Task InitSignal()
        {

            var torqueConfig = _configService.GetTorqueReaderConfig();

            if (torqueConfig != null)
            {
                try
                {
                    var port = FileHelper.ReadJsonFile<TorqueProduceModel>(FilePath.TorqueReaderConfigurationPath);
                    if (string.IsNullOrEmpty(port.TorqueMeasureSerialPort))

                    {
                        client = new TouchSocket.SerialPorts.SerialPortClient();
                        client.Connecting = (client1, e) => { return EasyTask.CompletedTask; };//即将连接到端口
                        client.Connected = (client1, e) => { return EasyTask.CompletedTask; };//成功连接到端口
                        client.Closing = (client1, e) => { return EasyTask.CompletedTask; };//即将从端口断开连接。此处仅主动断开才有效。
                        client.Closed = (client1, e) => { return EasyTask.CompletedTask; };//从端口断开连接，当连接不成功时不会触发。
                        client.Received = async (c, e) =>
                        {
                            //await Console.Out.WriteLineAsync(Encoding.UTF8.GetString(e.ByteBlock.Buffer));
                            await Console.Out.WriteLineAsync(e.ByteBlock.Span.ToString(Encoding.ASCII));
                        };
                        client.Received = Sp_DataReceived;

                        await client.SetupAsync(new TouchSocketConfig()
                             .SetSerialPortOption(new SerialPortOption()
                             {
                                 BaudRate = torqueConfig.BaudRate,//波特率
                                 DataBits = torqueConfig.DataBits,//数据位
                                 Parity = torqueConfig.Parity,//校验位
                                 PortName = torqueConfig.PortName,//COM
                                 StopBits = torqueConfig.StopBits//停止位
                             })
                             .SetSerialDataHandlingAdapter(() => new PeriodPackageAdapter() { CacheTimeout = TimeSpan.FromMilliseconds(100) })
                             );

                        await client.ConnectAsync();
                    }
                    else
                    {
                        SendTaskMessage("请设置扭力测量仪串口！", MessageLevel.Error);
                    }
                }
                catch (Exception ex)
                {
                    LogHelper.WriteLogError("初始化扭力测量仪时出错！", ex);
                    SendTaskMessage("初始化扭力测量仪时出错！" + ex.Message, MessageLevel.Error);
                }
            }
            else
            {
                TorqueSerialPortConfig config = new TorqueSerialPortConfig();
                FileHelper.WriteJsonFile(config, FilePath.TorqueReaderConfigurationPath);
            }
        }
        #endregion

        #region 机器人指令执行

        public Dictionary<Guid, CancellationTokenSource> RobotTCPCollection = new Dictionary<Guid, CancellationTokenSource>();
        /// <summary>
        /// 机器人TCP接收
        /// </summary>
        /// <param name="arg1"></param>
        /// <param name="arg2"></param>
        /// <param name="arg3"></param>
        private async void Management_ReceivedEvent(Guid robotid, object arg2, TouchSocket.Sockets.ReceivedDataEventArgs e)
        {
            try
            {
                if (!RobotTCPCollection.ContainsKey(robotid))
                    RobotTCPCollection.Add(robotid, new CancellationTokenSource());
                else
                {
                    if (RobotTCPCollection[robotid].IsCancellationRequested)
                    {
                        RobotTCPCollection[robotid] = new CancellationTokenSource();
                    }
                }
                var robot = await _robotService.GetRobotAsync(robotid);
                //从服务器收到信息。但是一般byteBlock和requestInfo会根据适配器呈现不同的值。
                var buffer = e.ByteBlock.Span.ToString(robot.GetEncoding());
                SendTaskMessage($"{robot.Name}Received:{buffer}", MessageLevel.Info);

                var _ = _remoteCommandService.ExecuteAsync(buffer, RobotTCPCollection[robotid].Token, async msg =>
                {
                    try
                    {
                        if (robot.ConnectType == TCPConnectType.Client)
                        {
                            if (robot.IsConnected)
                            {
                                await robot.SendAsync($"{msg}");
                            }
                        }
                        else
                        {
                            var cient = (ITcpSessionClient)arg2;
                            if (cient.Online)
                            {
                                await robot.SendAsync(cient, $"{msg}");
                            }
                        }
                    }
                    catch (Exception ex)
                    {
                        LogHelper.WriteLogError(Lang.TCP发送数据时出错, ex);
                        SendTaskMessage(ex.Message, MessageLevel.Alarm);
                    }
                });
            }
            catch (Exception ex)
            {
                LogHelper.WriteLogError(Lang.处理机器人接收的命令时出错, ex);
                SendTaskMessage(ex.Message, MessageLevel.Alarm);
            }
        }

        #endregion

        #region 机器人&Feeder&相机连接状态事件
        /// <summary>
        /// 机器人发送事件
        /// </summary>
        /// <param name="arg1"></param>
        /// <param name="arg2"></param>
        /// <param name="arg3"></param>
        /// <exception cref="NotImplementedException"></exception>
        private void Management_SendEvent(Guid robotid, object arg2, string arg3)
        {
            var r = _robotService.GetRobot(robotid);
            SendTaskMessage($"{r.Name}Send:{arg3}", MessageLevel.Info);
        }

        /// <summary>
        /// 机器人断开连接时
        /// </summary>
        /// <param name="arg1"></param>
        /// <param name="arg2"></param>
        /// <param name="arg3"></param>
        /// <exception cref="NotImplementedException"></exception>
        private void Management_DisconnectedEvent(Guid robotid, object arg2, ClosedEventArgs arg3)
        {
            if (RobotTCPCollection.ContainsKey(robotid))
            {
                RobotTCPCollection[robotid].Cancel();
            }
            var r = _configService.GetRobot(robotid);
            if (r.ConnectType == TCPConnectType.Server)
            {
                ITcpSessionClient socketClient = arg2 as ITcpSessionClient;
                SendTaskMessage($"{r.RobotName}[{socketClient.Id}:{socketClient.IP}]{Lang.断开连接}！", MessageLevel.Error);

                var robot = _robotService.GetRobot(robotid);
                if (robot.TcpService.Count < 1)
                {
                    var sta = Status.FirstOrDefault(s => s.ID == robotid);
                    App.Current.Dispatcher.Invoke(new
                         Action(() =>
                         {
                             sta.Message = $"{r.RobotName}{Lang.未连接}";
                             sta.Background = new SolidColorBrush(Colors.Red);
                         }));

                }
            }
            else
            {
                SendTaskMessage($"{r.RobotName}{Lang.断开连接}！", MessageLevel.Error);
                var sta = Status.FirstOrDefault(s => s.ID == robotid);
                App.Current.Dispatcher.Invoke(new
                         Action(() =>
                         {
                             sta.Message = $"{r.RobotName}{Lang.断开连接}";
                             sta.Background = new SolidColorBrush(Colors.Red);
                         }));

            }
        }

        /// <summary>
        /// 机器人连接成功时
        /// </summary>
        /// <param name="arg1"></param>
        /// <param name="arg2"></param>
        /// <param name="arg3"></param>
        /// <exception cref="NotImplementedException"></exception>
        private void Management_ConnectedEvent(Guid robotid, object arg2, ConnectedEventArgs arg3)
        {
            var r = _configService.GetRobot(robotid);
            if (r.ConnectType == TCPConnectType.Server)
            {
                ITcpSessionClient socketClient = arg2 as ITcpSessionClient;
                SendTaskMessage($"{r.RobotName}[{socketClient.Id}:{socketClient.IP}]{Lang.已连接}！", MessageLevel.Debug);

                var robot = _robotService.GetRobot(robotid);
                if (robot.TcpService.Count > 0)
                {
                    var sta = Status.FirstOrDefault(s => s.ID == robotid);
                    App.Current.Dispatcher.Invoke(new
                         Action(() =>
                         {
                             sta.Message = $"{r.RobotName}{Lang.已连接}";
                             sta.Background = new SolidColorBrush(Colors.Green);
                         }));

                }
            }
            else
            {
                SendTaskMessage($"{r.RobotName}{Lang.已连接}！", MessageLevel.Debug);
                var sta = Status.FirstOrDefault(s => s.ID == robotid);
                App.Current.Dispatcher.Invoke(new
                         Action(() =>
                         {
                             sta.Message = $"{r.RobotName}{Lang.已连接}";
                             sta.Background = new SolidColorBrush(Colors.Green);
                         }));

            }
        }

        /// <summary>
        /// Feeder连接状态改变时
        /// </summary>
        /// <param name="sender"></param>
        /// <param name="state"></param>
        private void Management_FeederConnectionStatusChanged(object sender, bool state)
        {
            IFeeder feeder = sender as IFeeder;
            var sta = Status.FirstOrDefault(s => s.ID == feeder.Id);
            if (state)
            {
                App.Current.Dispatcher.Invoke(new
                         Action(() =>
                         {
                             sta.Message = $"{feeder.Name}{Lang.已连接}";
                             sta.Background = new SolidColorBrush(Colors.Green);
                         }));

                SendTaskMessage($"{feeder.Name}{Lang.已连接}！", MessageLevel.Debug);
            }
            else
            {
                App.Current.Dispatcher.Invoke(new
                         Action(() =>
                         {
                             sta.Message = $"{feeder.Name}{Lang.未连接}";
                             sta.Background = new SolidColorBrush(Colors.Red);
                         }));

                SendTaskMessage($"{feeder.Name}{Lang.断开连接}！", MessageLevel.Error);
            }
        }

        /// <summary>
        /// 相机连接或者断开时
        /// </summary>
        /// <param name="id"></param>
        /// <param name="state"></param>
        private void Management_CameraConnectChangedEvent(Guid id, bool state)
        {
            var sta = Status.FirstOrDefault(s => s.ID == id);
            var camera = _configService.GetCamera(id);
            if (sta != null && camera != null)
            {
                if (state)
                {
                    App.Current.Dispatcher.Invoke(new Action(() =>
                    {
                        sta.Message = $"{camera.CameraName}{Lang.已连接}";
                        sta.Background = new SolidColorBrush(Colors.Green);
                    }));

                }
                else
                {
                    App.Current.Dispatcher.Invoke(new Action(() =>
                    {
                        sta.Message = $"{camera.CameraName}{Lang.断开连接}";
                        sta.Background = new SolidColorBrush(Colors.Red);
                    }));
                }
            }
        }

        /// <summary>
        /// PLC连接状态改变事件
        /// </summary>
        /// <param name="plc"></param>
        /// <param name="isconnected"></param>
        private async void Management_PlcConnectChangedEvent(object sender, bool isconnected)
        {
            IPlc plc = sender as IPlc;
            var sta = Status.FirstOrDefault(s => s.ID == plc.Id);
            if (plc.IsConnected)
            {
                SendTaskMessage($"{plc.Name}{Lang.已连接}！", MessageLevel.Debug);
                if (sta == null) return;
                App.Current.Dispatcher.Invoke(new
                         Action(() =>
                         {
                             sta.Message = $"{plc.Name}{Lang.已连接}";
                             sta.Background = new SolidColorBrush(Colors.Green);
                         }));
                try
                {
                    await WriteSystemParameterToPlcAsync(_configService.GetSystemConfiguration());
                    await WriteParameterToPlcExAsync();
                }
                catch (Exception ex)
                {
                    LogHelper.WriteLogError("PLC连接成功时，写入系统参数和点位信息时出错！", ex);
                }
            }
            else
            {
                SendTaskMessage($"{plc.Name}{Lang.断开连接}！", MessageLevel.Error);
                if (sta == null) return;
                App.Current.Dispatcher.Invoke(new
                         Action(() =>
                         {
                             sta.Message = $"{plc.Name}{Lang.未连接}";
                             sta.Background = new SolidColorBrush(Colors.Red);
                         }));
            }
        }

        /// <summary>
        /// 电批连接状态改变时
        /// </summary>
        /// <param name="screwDevice"></param>
        /// <param name="state"></param>
        private void ScrewDriver_ConnectStateChangedEvent(object screwDevice, bool state)
        {
            try
            {
                XYD_ScrewDriver screwDriver = screwDevice as XYD_ScrewDriver;
                if (state)
                {
                    SendTaskMessage(Lang.电批已连接, MessageLevel.Debug);
                    var sta = Status.FirstOrDefault(s => s.ID == screwDriver.Id);
                    App.Current.Dispatcher.Invoke(new
                         Action(() =>
                         {
                             sta.Message = Lang.电批已连接;
                             sta.Background = new SolidColorBrush(Colors.Green);
                         }));
                }
                else
                {
                    SendTaskMessage(Lang.电批未连接, MessageLevel.Error);
                    var sta = Status.FirstOrDefault(s => s.ID == screwDriver.Id);
                    App.Current.Dispatcher.Invoke(new
                         Action(() =>
                         {
                             sta.Message = Lang.电批未连接;
                             sta.Background = new SolidColorBrush(Colors.Red);
                         }));
                }
            }
            catch (Exception ex)
            {
                LogHelper.WriteLogError(Lang.电批连接状态改变时出错了, ex);
            }
        }
        #endregion

        #region 后台服务器通讯事件
        private void BgCommunicate_SendEvent(ITcpSessionClient client, string msg)
        {
            SendTaskMessage($"{Lang.服务器}[{client.ServicePort}] Send To {Lang.客户端}[{client.Id}:{client.IP}]:{msg}", MessageLevel.Info);
        }

        public Dictionary<string, CancellationTokenSource> BgCommunicateollection = new Dictionary<string, CancellationTokenSource>();
        private async void BgCommunicate_ReceivedEvent(ITcpSessionClient client, string msg)
        {

            try
            {
                if (!BgCommunicateollection.ContainsKey(client.Id))
                {
                    BgCommunicateollection.Add(client.Id, new CancellationTokenSource());
                }

                SendTaskMessage($"{Lang.服务器}[{client.ServicePort}]ReceiveFor{Lang.客户端}[{client.Id}:{client.IP}]:{msg}", MessageLevel.Info);
                var _ = _remoteCommandService.ExecuteAsync(msg, BgCommunicateollection[client.Id].Token, async response =>
                {
                    try
                    {
                        if (!client.Online)
                        {
                            return;
                        }
                        await BgCommunicate.SendAsync(client, $"{response}");
                    }
                    catch (Exception ex)
                    {
                        LogHelper.WriteLogError(Lang.后台TCP发送数据时出错, ex);
                        SendTaskMessage(ex.Message, MessageLevel.Alarm);
                    }
                });
            }
            catch (Exception ex)
            {
                LogHelper.WriteLogError(Lang.处理后台服务器接收的命令时出错, ex);
                SendTaskMessage(ex.Message, MessageLevel.Alarm);
            }
        }

        private void BgCommunicate_DisconnectedEvent(ITcpSessionClient client, ClosedEventArgs e)
        {
            SendTaskMessage($"{Lang.服务器}[{client.ServicePort}]{Lang.客户端}[{client.Id}:{client.IP}]{Lang.断开连接}!", MessageLevel.Alarm);
            if (BgCommunicateollection.ContainsKey(client.Id))
            {
                BgCommunicateollection[client.Id].Cancel();
            }
        }

        private void BgCommunicate_ConnectedEvent(ITcpSessionClient client, ConnectedEventArgs e)
        {
            SendTaskMessage($"{Lang.服务器}[{client.ServicePort}]{Lang.客户端}[{client.Id}:{client.IP}]{Lang.连接成功}!", MessageLevel.Debug);
        }

        /// <summary>
        /// 扭力测量仪接收信息
        /// </summary>
        /// <param name="client"></param>
        /// <param name="e"></param>
        /// <returns></returns>
        private async Task Sp_DataReceived(ISerialPortClient client, ReceivedDataEventArgs e)
        {
            try
            {
                string poname = client.MainSerialPort.PortName;
                string data = e.ByteBlock.Span.ToString(Encoding.ASCII);
                await Console.Out.WriteLineAsync(data);
                string response = data.Split('\r')[0];
                SendTaskMessage($"{poname}Receive:{response}", MessageLevel.Info);
                SignalValue = "";
                SignalValue = response;
            }
            catch (Exception ex)
            {
                LogHelper.WriteLogError("扭力测量仪接收信息时出错！", ex);
                SendTaskMessage("扭力测量仪接收信息时出错！" + ex.Message, MessageLevel.Error);
                Thread.Sleep(50);
            }
        }
        #endregion

        #region PLC
        /// <summary>
        /// 将系统参数写入PLC
        /// </summary>
        /// <param name="systemConfiguration"></param>
        /// <returns></returns>
        public async Task WriteSystemParameterToPlcAsync(SystemConfiguration systemConfiguration)
        {
            var addressConfig = _configService.GetPlcAddresses();
            var plc = _plcService.GetPlcByNumber(addressConfig.PlcNo) as OpcUaClientPLC;
            if (plc == null || !plc.IsConnected) return;
            Dictionary<string, object> nodeValues = new Dictionary<string, object>();
            nodeValues.Add(addressConfig.Out_WorkMode.Address, (Int16)systemConfiguration.WorkMode);
            nodeValues.Add(addressConfig.Out_PickPointNum.Address, (Int16)systemConfiguration.PickPointNum);
            nodeValues.Add(addressConfig.Out_DowmCameraNum.Address, (Int16)systemConfiguration.DowmCameraNum);
            nodeValues.Add(addressConfig.Out_UpCameraPickNum.Address, (Int16)systemConfiguration.UpCameraPickNum);
            nodeValues.Add(addressConfig.Out_UpCameraPutNum.Address, (Int16)systemConfiguration.UpCameraPutNum);
            nodeValues.Add(addressConfig.Out_UPCameracheckNum.Address, (Int16)systemConfiguration.UPCameracheckNum);
            nodeValues.Add(addressConfig.Out_FixedCameraPickNum.Address, (Int16)systemConfiguration.FixedCameraPickNum);
            nodeValues.Add(addressConfig.Out_FixedCameraPutNum.Address, (Int16)systemConfiguration.FixedCameraPutNum);
            nodeValues.Add(addressConfig.Out_FixedCameracheckNum.Address, (Int16)systemConfiguration.FixedCameracheckNum);
            nodeValues.Add(addressConfig.Out_ScrewTeachNum.Address, (Int16)systemConfiguration.ScrewTeachNum);

            var res = await plc.WriteNodesAsync(nodeValues);
        }

        /// <summary>
        /// 注册需要监控的PLC地址
        /// </summary>
        public void RegisterPlcMonitorAddress()
        {
            var addressConfig = _configService.GetPlcAddresses();
            var plc = _plcService.GetPlcByNumber(addressConfig.PlcNo) as OpcUaClientPLC;
            if (plc == null || !plc.IsConnected) return;

            //PLC地址数组
            List<string> monitorNodeIds = new List<string>()
            {
                addressConfig.In_DowmCameraExe.Address,
                addressConfig.In_UpCameraPickExe.Address,
                addressConfig.In_UpCameraPutExe.Address,
                addressConfig.In_UPCameracheckExe.Address,
                addressConfig.In_FixedCameraPickExe.Address,
                addressConfig.In_FixedCameraPutExe.Address,
                addressConfig.In_FixedCameracheckExe.Address,
                addressConfig.In_WorkStart.Address,
                addressConfig.In_WorkDone.Address,
                //addressConfig.In_MesCheck.Address,
                addressConfig.In_RequestPosition.Address,
                addressConfig.In_QrCodePhotoRequest.Address,
                addressConfig.In_ScrewTeachExe.Address,
                addressConfig.In_Screw_checkExe.Address,
                addressConfig.In_PickINC.Address,
                addressConfig.In_Throw.Address,
                addressConfig.RunMode.Address,
                addressConfig.AutoRunning.Address,
                addressConfig.ManualMode.Address,
                addressConfig.ClearMode.Address,
                addressConfig.Fault.Address,
                addressConfig.In_FzCameraPixExe.Address,
            };
            var systemconfig = _configService.GetSystemConfiguration();
            for (int i = 0; i < 10; i++)
            {
                if (systemconfig.DoubleSoftMode && i == 1)
                {
                    continue;
                }
                monitorNodeIds.Add(string.Format(addressConfig.In_MesCheck.Address, i));
            }
            //订阅PLC地址变化
            //plc.SubscribeNodes("AutoSensor", monitorNodeIds, PlcCommandTrigger, OpcUaSubscriptionMode.CustomPolling);

            plc.SubscribeNodes("AutoSensor", monitorNodeIds, PlcCommandTrigger, OpcUaSubscriptionMode.CustomPolling);

            // 2. 监听重连事件，重连成功后自动重新订阅
            plc.ConnectChangedEvent -= Plc_ConnectChanged; // 防止重复注册
            plc.ConnectChangedEvent += Plc_ConnectChanged;

            // 定义重连处理方法（写在同一个类里即可）
            void Plc_ConnectChanged(object sender, bool isConnected)
            {
                if (isConnected)
                {
                    // 重连成功后，重新订阅节点
                    plc.SubscribeNodes("AutoSensor", monitorNodeIds, PlcCommandTrigger, OpcUaSubscriptionMode.CustomPolling);
                }
            }
        }

        /// <summary>
        /// 将产品的参数统一写入PLC
        /// </summary>
        /// <returns></returns>
        public async Task WriteParameterToPlcExAsync()
        {
            await WritePositionToPlcAsync();// 写入点位信息给PLC
            //await WriteParameterToPlcAsync();// 写入组装上下限给PLC
            await WriteProductLoadModeToPLC();//把当前产品型号，写入PLC
        }

        /// <summary>
        /// 写入点位信息给PLC
        /// </summary>
        /// <returns></returns>
        public async Task WritePositionToPlcAsync()
        {
            var addressConfig = _configService.GetPlcAddresses();
            var plc = _plcService.GetPlcByNumber(addressConfig.PlcNo) as OpcUaClientPLC;
            if (plc == null || !plc.IsConnected) return;
            var current = _productService.GetCurrentProduct();
            if (current == null) return;
            _LastAutoRunning = plc.ReadNode<bool>(addressConfig.AutoRunning.Address);
            if (current.PickCameraPoints != null && current.PickCameraPoints.Count > 0)
            {
                foreach (var item in current.PickCameraPoints)
                {
                    await item.WriteToPlcAddress(addressConfig.Out_PickCamera, plc);
                }
            }

            if (current.PickPoints != null && current.PickPoints.Count > 0)
            {
                foreach (var item in current.PickPoints)
                {
                    await item.WriteToPlcAddress(addressConfig.Out_Pick, plc, item.Feeder);
                    //await item.WriteToPlcAddress(addressConfig.Out_Pick, plc);
                }
            }
            if (current.SecPosCameraPoints != null && current.SecPosCameraPoints.Count > 0)
            {
                foreach (var item in current.SecPosCameraPoints)
                {
                    await item.WriteToPlcAddress(addressConfig.Out_SecPosCamera, plc);
                }
            }
            if (current.ScrewCameraPoints != null && current.ScrewCameraPoints.Count > 0)
            {
                int index = 0;
                foreach (var item in current.ScrewCameraPoints)
                {
                    //根据使用的点位进行排序
                    if (item.IsUse)
                    {
                        index++;
                        await item.WriteToPlcAddress(addressConfig.Out_ScrewCamera, plc, index);
                    }
                }
            }
            if (current.ScrewPoints != null && current.ScrewPoints.Count > 0)
            {
                int index = 0;
                foreach (var item in current.ScrewPoints)
                {
                    if (item.IsUse)
                    {
                        index++;
                        await item.WriteToPlcAddressEx(addressConfig.Out_Screw, plc, index);
                    }
                }
                await plc.WriteNodeAsync(addressConfig.Out_WorkNum.Address, (Int16)index);
            }
            if (current.CheckCameraPoints != null && current.CheckCameraPoints.Count > 0)
            {
                int index = 0;
                foreach (var item in current.CheckCameraPoints)
                {
                    if (item.IsUse)
                    {
                        index++;
                        await item.WriteToPlcAddress(addressConfig.Out_CheckCamera, plc, index);
                    }
                }
            }
            if (current.QrCodePoints != null && current.QrCodePoints.Count > 0)
            {
                foreach (var item in current.QrCodePoints)
                {
                    await item.WriteToPlcAddress(addressConfig.Out_QrCodeCamera, plc);
                }
            }
        }

        /// <summary>
        /// 将当前产品类型写入PLC
        /// </summary>
        /// <param name="mode"></param>
        public async Task WriteProductLoadModeToPLC(int modeIndex)
        {
            var addressConfig = _configService.GetPlcAddresses();
            var plc = _plcService.GetPlcByNumber(addressConfig.PlcNo) as OpcUaClientPLC;
            if (plc == null || !plc.IsConnected) return;

            await plc.WriteNodeAsync(addressConfig.Out_ProductLoadMode.Address, (Int16)modeIndex);
        }

        /// <summary>
        /// 将当前产品类型写入PLC
        /// </summary>
        /// <param name="mode"></param>
        public async Task WriteProductLoadModeToPLC()
        {
            var addressConfig = _configService.GetPlcAddresses();
            var plc = _plcService.GetPlcByNumber(addressConfig.PlcNo) as OpcUaClientPLC;
            if (plc == null || !plc.IsConnected) return;

            var current = _productService.GetCurrentProduct();
            if (current == null) return;

            var qMes = await _systemDatabaseService.QueryProductFromMesAsync(current.Name);
            if (qMes == null) return;

            await plc.WriteNodeAsync(addressConfig.Out_ProductLoadMode.Address, (Int16)qMes.ProductLoadMode);
        }

        PointF[] DowmCameraResults = new PointF[10];
        PointF[] UpCameraPutResults = new PointF[10];

        bool _LastDowmCameraExe = false;
        bool _LastScrewTeachExe = false;
        bool _LastUpCameraPickExe = false;
        bool _LastScrewFuJianExe = false;
        bool _LastUpCameraPutExe = false;
        bool _LastUPCameracheckExe = false;
        bool _LastFixedCameraPickExe = false;
        bool _LastFixedCameraPutExe = false;
        bool _LastFixedCameracheckExe = false;
        bool _LastFzCameracheckExe = false;
        bool _LastThrowExe = false;
        bool _LastRunModel = false;
        public bool _LastAutoRunning = false;
        bool _LastManualMode = false;
        bool _LastClearMode = false;
        bool _LastFault = false;
        Int16 _LastWorkStart = 0;
        Int16 _LastWorkDone = 0;
        Int16 _LastRequestPosition = 0;
        Int16 _LastQrCodePhotoRequest = 0;
        Int16[] _LastMesCheck = new Int16[10];
        Int16 _LastPickINC = 0;
        DateTime[] _LastMesCheckTime = new DateTime[10];
        Dictionary<string, string> mes_cc = new Dictionary<string, string>();
        Dictionary<string, double> Point = new Dictionary<string, double>();
        string[] ProductMainSN { get; set; } = new string[10];//产品主sn
        string[] model_num { get; set; } = new string[10];//产品model_num
        string[] wo { get; set; } = new string[10];//产品wo
        string[] color { get; set; } = new string[10];//产品color
        string[] ppid { get; set; } = new string[10];//产品ppid
        string[] revision { get; set; } = new string[10];//产品revision

        Dictionary<string, string> dataToMes = new Dictionary<string, string>();//上传mes的数据
        List<string> resultToMes { get; set; } = new List<string>();//上传mes的数据
        /// <summary>
        /// PLC命令触发时
        /// </summary>
        /// <param name="tuple"></param>
        private async void PlcCommandTrigger((string key, string nodeId, object value) tuple)
        {
            try
            {
                if (tuple.key != "AutoSensor")
                {
                    SendTaskMessage("PLC指令错误", MessageLevel.Debug);
                    return;
                }

                var addressConfig = _configService.GetPlcAddresses();

                var plc = _plcService.GetPlcByNumber(addressConfig.PlcNo) as OpcUaClientPLC;
                if (plc == null || !plc.IsConnected)
                {
                    SendTaskMessage("plc为空", MessageLevel.Debug);
                    return;
                }

                // 获取当前产品
                var currentProduct = _productService.GetCurrentProduct();
                if (currentProduct == null)
                {
                    return;
                }

                ////获取产品编码
                //_productService.CurrentProductCode = plc.ReadNode<string>(string.Format(addressConfig.In_Code.Address, 0));
                ////如果产品编码为空，则以当前的时间戳作为编码
                //if (string.IsNullOrEmpty(_productService.CurrentProductCode))
                //{
                //    _productService.CurrentProductCode = DateTime.Now.ToString("yyyyMMddHHmmssfff");
                //}

                // 触发下相机拍照
                if (addressConfig.In_DowmCameraExe.Address.Contains(tuple.nodeId))
                {
                    if (tuple.value is bool state)
                    {
                        if (_LastDowmCameraExe != state)
                        {
                            _LastDowmCameraExe = state;
                        }
                        else
                        {
                            return;
                        }

                        if (state)
                        {
                            SendTaskMessage(Lang.触发下相机拍照, MessageLevel.Debug);
                            //相机的编号
                            Int16 cameraIndex = plc.ReadNode<Int16>(addressConfig.In_DowmCameraNum.Address);
                            SendTaskMessage(string.Format(Lang.编号0, cameraIndex), MessageLevel.Info);

                            // 获取流程
                            var process = _productService.GetCurrentProductProcedureModelById(currentProduct.FixedUpCamera1ProcedureId);
                            if (process == null)
                            {
                                SendTaskMessage(string.Format(Lang.固定向上相机1视觉流程流程ID0, currentProduct.FixedUpCamera1ProcedureId), MessageLevel.Alarm);
                                await plc.WriteNodeAsync(addressConfig.Out_DownCameraStatus.Address, (Int16)2);
                                return;
                            }

                            // 获取机器人当前坐标
                            var robot = _robotService.GetAllRobots().FirstOrDefault();
                            if (robot == null)
                            {
                                SendTaskMessage(Lang.未找到机器人无法执行上相机锁附组装拍照视觉任务, MessageLevel.Alarm);
                                await plc.WriteNodeAsync(addressConfig.Out_DownCameraStatus.Address, (Int16)2);
                                return;

                            }
                            var currentPosition = robot.GetRobotPos();

                            // 执行视觉任务
                            var _cts = new CancellationTokenSource();
                            ImageParameters imgPara = new ImageParameters();
                            imgPara.SNCode = productSn;
                            var visionResult = await _remoteCommandService.ExecutePhotoGetSinglePoint(process, null, null, _cts.Token, cameraIndex, cameraIndex, null, imgPara);
                            if (visionResult.IsSucceed)
                            {
                                //披头偏差
                                float offsetX = (float)(visionResult.X - currentPosition.X);
                                float offsetY = (float)(visionResult.Y - currentPosition.Y);

                                DowmCameraResults[cameraIndex] = new PointF(offsetX, offsetY);
                                await plc.WriteNodeAsync(addressConfig.Out_DownCameraStatus.Address, (Int16)1);
                                return;
                            }
                            else
                            {
                                await plc.WriteNodeAsync(addressConfig.Out_DownCameraStatus.Address, (Int16)2);
                                return;
                            }
                        }
                        else
                        {
                            SendTaskMessage(Lang.触发下相机拍照信号已关闭, MessageLevel.Alarm);
                            await plc.WriteNodeAsync(addressConfig.Out_DownCameraStatus.Address, (Int16)0);
                        }
                    }
                }
                // 触发下相机拍照披头
                if (addressConfig.In_ScrewTeachExe.Address.Contains(tuple.nodeId))
                {
                    if (tuple.value is bool state)
                    {
                        if (_LastScrewTeachExe != state)
                        {
                            _LastScrewTeachExe = state;
                        }
                        else
                        {
                            return;
                        }

                        if (state)
                        {
                            SendTaskMessage(Lang.触发下相机拍照, MessageLevel.Debug);
                            //相机的编号
                            Int16 cameraIndex = plc.ReadNode<Int16>(addressConfig.In_DowmCameraNum.Address);
                            SendTaskMessage(string.Format(Lang.编号0, cameraIndex), MessageLevel.Info);

                            // 获取流程
                            var process = _productService.GetCurrentProductProcedureModelById(currentProduct.FixedUpCamera1ProcedureId);
                            if (process == null)
                            {
                                SendTaskMessage(string.Format(Lang.固定向上相机1视觉流程流程ID0, currentProduct.FixedUpCamera1ProcedureId), MessageLevel.Alarm);
                                await plc.WriteNodeAsync(addressConfig.Out_ScrewTeachOk.Address, (Int16)2);
                                return;
                            }

                            // 获取机器人当前坐标
                            var robot = _robotService.GetAllRobots().FirstOrDefault();
                            if (robot == null)
                            {
                                SendTaskMessage(Lang.未找到机器人无法执行上相机锁附组装拍照视觉任务, MessageLevel.Alarm);
                                await plc.WriteNodeAsync(addressConfig.Out_ScrewTeachOk.Address, (Int16)2);
                                return;

                            }
                            var currentPosition = robot.GetRobotPos();

                            // 执行视觉任务
                            var _cts = new CancellationTokenSource();
                            ImageParameters imgPara = new ImageParameters();
                            imgPara.SNCode = productSn;
                            var visionResult = await _remoteCommandService.ExecutePhotoGetSinglePoint(process, null, null, _cts.Token, cameraIndex, cameraIndex, null, imgPara);
                            if (visionResult.IsSucceed)
                            {
                                //披头偏差
                                float offsetX = (float)(visionResult.X - currentPosition.X);
                                float offsetY = (float)(visionResult.Y - currentPosition.Y);

                                DowmCameraResults[cameraIndex] = new PointF(offsetX, offsetY);
                                await plc.WriteNodeAsync(addressConfig.Out_ScrewTeachOk.Address, (Int16)1);
                                return;
                            }
                            else
                            {
                                await plc.WriteNodeAsync(addressConfig.Out_ScrewTeachOk.Address, (Int16)2);
                                return;
                            }
                        }
                        else
                        {
                            SendTaskMessage(Lang.触发下相机拍照信号已关闭, MessageLevel.Alarm);
                            await plc.WriteNodeAsync(addressConfig.Out_ScrewTeachOk.Address, (Int16)0);
                        }
                    }
                }
                // 触发上相机取料拍照
                else if (addressConfig.In_UpCameraPickExe.Address.Contains(tuple.nodeId))
                {
                    if (tuple.value is bool state)
                    {
                        if (_LastUpCameraPickExe != state)
                        {
                            _LastUpCameraPickExe = state;
                        }
                        else
                        {
                            return;
                        }

                        if (state)
                        {
                            SendTaskMessage(Lang.触发上相机取料拍照, MessageLevel.Debug);
                            //相机的编号
                            //Int16 cameraIndex = plc.ReadNode<Int16>(addressConfig.In_UpCameraPickNum.Address);


                            await plc.WriteNodeAsync(addressConfig.Out_UpCameraPickStatus.Address, (Int16)1);
                        }
                        else
                        {
                            SendTaskMessage(Lang.触发上相机取料拍照信号已关闭, MessageLevel.Alarm);
                            await plc.WriteNodeAsync(addressConfig.Out_UpCameraPickStatus.Address, (Int16)0);
                        }
                    }
                }
                // 上相机锁附/组装拍照
                else if (addressConfig.In_UpCameraPutExe.Address.Contains(tuple.nodeId))
                {
                    if (tuple.value is bool state)
                    {
                        if (_LastUpCameraPutExe != state)
                        {
                            _LastUpCameraPutExe = state;
                        }
                        else
                        {
                            return;
                        }

                        if (state)
                        {
                            SendTaskMessage(Lang.触发上相机锁附组装拍照, MessageLevel.Debug);
                            //相机的编号
                            Int16 cameraIndex = plc.ReadNode<Int16>(addressConfig.In_UpCameraPutNum.Address);
                            SendTaskMessage(string.Format(Lang.编号0, cameraIndex), MessageLevel.Info);

                            //视觉流程ID
                            Guid procedureId = currentProduct.MoveDownCameraLockPhotoProcedureId;

                            List<PlcPoint> plcPoints = new List<PlcPoint>();
                            foreach (var item in currentProduct.ScrewCameraPoints)
                            {
                                if (item.IsUse)
                                {
                                    plcPoints.Add(item);
                                }
                            }

                            int num = plcPoints.Count;
                            //获取锁付拍照的点位
                            var pos = plcPoints[cameraIndex - 1];
                            if (pos != null)
                            {
                                procedureId = pos.VisionProcessID;
                            }

                            // 获取流程
                            var process = _productService.GetCurrentProductProcedureModelById(procedureId);
                            if (process == null)
                            {
                                SendTaskMessage(string.Format(Lang.未找到上相机锁附组装拍照对应的视觉流程流程ID0, procedureId), MessageLevel.Alarm);
                                await plc.WriteNodeAsync(addressConfig.Out_UpCameraPutStatus.Address, (Int16)2);
                                return;
                            }

                            // 获取机器人当前坐标
                            var robot = _robotService.GetAllRobots().FirstOrDefault();
                            if (robot == null)
                            {
                                SendTaskMessage(Lang.未找到机器人无法执行上相机锁附组装拍照视觉任务, MessageLevel.Alarm);
                                await plc.WriteNodeAsync(addressConfig.Out_UpCameraPutStatus.Address, (Int16)2);
                                return;

                            }
                            var currentPosition = robot.GetRobotPos();
                            var systemConfig = _configService.GetSystemConfiguration();
                            // 执行视觉任务
                            var _cts = new CancellationTokenSource();
                            ImageParameters imgPara = new ImageParameters();
                            imgPara.SNCode = productSn;

                            var visionResult = await _remoteCommandService.ExecutePhotoGetSinglePoint(process, null, new double[] { currentPosition.X, currentPosition.Y, currentPosition.U }, _cts.Token, cameraIndex, num, null, imgPara);
                            if (visionResult.IsSucceed)
                            {
                                //是拍一个锁一个还是拍两个点锁所有


                                if (systemConfig.IsBasePartOpenLightKB)
                                {
                                    if (mes_cc.ContainsKey(visionResult.distance.Split(',')[0]))
                                    {
                                        mes_cc[visionResult.distance.Split(',')[0]] = visionResult.distance.Split(',')[1];
                                    }
                                    else
                                    {
                                        mes_cc.Add(visionResult.distance.Split(',')[0], visionResult.distance.Split(',')[1]);
                                    }
                                }
                                //拍1打1 
                                if (systemConfig.WorkMode == 1)
                                {
                                    UpCameraPutResults[1] = new PointF((float)visionResult.X, (float)visionResult.Y);
                                }
                                else if(systemConfig.WorkMode==2)
                                {
                                    UpCameraPutResults[cameraIndex] = new PointF((float)visionResult.X, (float)visionResult.Y);
                                }
                                else if(systemConfig.WorkMode==3)
                                {
                                    if (cameraIndex <= 3)
                                    {
                                        UpCameraPutResults[1] = new PointF((float)visionResult.X, (float)visionResult.Y);
                                    }
                                    else
                                    {
                                        UpCameraPutResults[cameraIndex] = new PointF((float)visionResult.X, (float)visionResult.Y);
                                    }
                                }
                                if (resultToMes.Contains($"Screw{cameraIndex}_Fail"))
                                {
                                    resultToMes.Remove($"Screw{cameraIndex}_Fail");
                                    SendTaskMessage($"Screw{cameraIndex}:重复拍照成功", MessageLevel.Debug);
                                }
                                await plc.WriteNodeAsync(addressConfig.Out_UpCameraPutStatus.Address, (Int16)1);
                            }
                            else
                            {
                                if (systemConfig.IsBasePartOpenLightKB)
                                {
                                    if (mes_cc.ContainsKey(visionResult.distance.Split(',')[0]))
                                    {
                                        mes_cc[visionResult.distance.Split(',')[0]] = visionResult.distance.Split(',')[1];
                                    }
                                    else
                                    {
                                        if (mes_cc.ContainsKey(cameraIndex.ToString()))
                                        {
                                            mes_cc[cameraIndex.ToString()] = "0";
                                        }
                                        else
                                        {
                                            mes_cc.Add(cameraIndex.ToString(), "0");
                                        }
                                    }
                                }

                                if (!resultToMes.Contains($"Screw{cameraIndex}_Fail"))
                                {
                                    resultToMes.Add($"Screw{cameraIndex}_Fail");
                                    SendTaskMessage($"Screw{cameraIndex}:拍照失败", MessageLevel.Error);
                                }

                                await plc.WriteNodeAsync(addressConfig.Out_UpCameraPutStatus.Address, (Int16)2);
                            }
                        }
                        else
                        {
                            SendTaskMessage(Lang.触发上相机锁附组装拍照信号已关闭, MessageLevel.Alarm);
                            await plc.WriteNodeAsync(addressConfig.Out_UpCameraPutStatus.Address, (Int16)0);
                        }
                    }
                }
                // 上相机检测拍照
                else if (addressConfig.In_UPCameracheckExe.Address.Contains(tuple.nodeId))
                {
                    if (tuple.value is bool state)
                    {
                        if (_LastUPCameracheckExe != state)
                        {
                            _LastUPCameracheckExe = state;
                        }
                        else
                        {
                            return;
                        }
                        if (state)
                        {
                            SendTaskMessage(Lang.触发上相机检测拍照, MessageLevel.Debug);
                            //相机的编号
                            Int16 cameraIndex = plc.ReadNode<Int16>(addressConfig.In_UPCameracheckNum.Address);
                            SendTaskMessage(string.Format(Lang.编号0, cameraIndex), MessageLevel.Info);

                            //获取锁付拍照的点位
                            List<PlcPoint> plcPoints = new List<PlcPoint>();
                            foreach (var item in currentProduct.CheckCameraPoints)
                            {
                                if (item.IsUse)
                                {
                                    plcPoints.Add(item);
                                }
                            }

                            int num = plcPoints.Count;
                            //视觉流程ID
                            Guid procedureId = Guid.Empty;
                            //获取锁付拍照的点位
                            var pos = plcPoints[cameraIndex - 1];
                            if (pos != null)
                            {
                                procedureId = pos.VisionProcessID;
                            }

                            // 获取流程
                            var process = _productService.GetCurrentProductProcedureModelById(procedureId);
                            if (process == null)
                            {
                                SendTaskMessage(string.Format("未找到点位：{0}的视觉流程：{1}", cameraIndex, procedureId), MessageLevel.Alarm);
                                await plc.WriteNodeAsync(addressConfig.Out_UPCameracheckStatus.Address, (Int16)2);
                                return;
                            }

                            // 获取机器人当前坐标
                            var robot = _robotService.GetAllRobots().FirstOrDefault();
                            if (robot == null)
                            {
                                SendTaskMessage("未找到机器人无法执行 上相机检测拍照视觉任务", MessageLevel.Alarm);
                                await plc.WriteNodeAsync(addressConfig.Out_UpCameraPutStatus.Address, (Int16)2);
                                return;
                            }
                            var currentPosition = robot.GetRobotPos();

                            // 执行视觉任务
                            var _cts = new CancellationTokenSource();
                            var visionResult = await _remoteCommandService.ExecutePhotoGetSinglePoint(process, null, new double[] { currentPosition.X, currentPosition.Y, currentPosition.U }, _cts.Token, cameraIndex, num, null, null);
                            if (visionResult.IsSucceed)
                            {
                                await plc.WriteNodeAsync(addressConfig.Out_UPCameracheckStatus.Address, (Int16)1);
                                SendTaskMessage($"点位{cameraIndex}检测OK", MessageLevel.Debug);
                            }
                            else
                            {
                                await plc.WriteNodeAsync(addressConfig.Out_UPCameracheckStatus.Address, (Int16)2);
                                SendTaskMessage($"点位{cameraIndex}检测NG", MessageLevel.Error);
                            }
                        }
                        else
                        {
                            SendTaskMessage(Lang.触发上相机检测拍照信号已关闭, MessageLevel.Alarm);
                            await plc.WriteNodeAsync(addressConfig.Out_UPCameracheckStatus.Address, (Int16)0);
                        }
                    }
                }
                //下相机拍照螺丝复检
                else if (addressConfig.In_Screw_checkExe.Address.Contains(tuple.nodeId))
                {
                    Point.Clear();
                    if (tuple.value is bool state)
                    {
                        if (_LastScrewFuJianExe != state)
                        {
                            _LastScrewFuJianExe = state;
                        }
                        else
                        {
                            return;
                        }

                        if (state)
                        {

                            SendTaskMessage(Lang.触发相机拍照螺丝复检, MessageLevel.Debug);
                            //相机的编号
                            Int16 cameraIndex = plc.ReadNode<Int16>(addressConfig.In_DowmCameraNum.Address);
                            SendTaskMessage(string.Format(Lang.编号0, cameraIndex), MessageLevel.Info);

                            // 获取流程
                            var process = _productService.GetCurrentProductProcedureModelById(currentProduct.FixedUpCameraProcedureId);
                            if (process == null)
                            {
                                SendTaskMessage(string.Format(Lang.固定向上相机视觉流程流程ID, currentProduct.FixedUpCameraProcedureId), MessageLevel.Alarm);
                                await plc.WriteNodeAsync(addressConfig.Out_Screw_check_status.Address, (Int16)2);
                                return;
                            }

                            // 获取机器人当前坐标
                            var robot = _robotService.GetAllRobots().FirstOrDefault();
                            if (robot == null)
                            {
                                SendTaskMessage(Lang.未找到机器人无法执行上相机锁附组装拍照视觉任务, MessageLevel.Alarm);
                                await plc.WriteNodeAsync(addressConfig.Out_Screw_check_status.Address, (Int16)2);
                                return;

                            }
                            var currentPosition = robot.GetRobotPos();

                            // 执行视觉任务
                            var _cts = new CancellationTokenSource();
                            ImageParameters imgPara = new ImageParameters();
                            imgPara.SNCode = productSn;
                            var visionResult = await _remoteCommandService.ExecutePhotoGetSinglePoint1(process, null, null, _cts.Token, cameraIndex, cameraIndex, null, imgPara);
                            //string X, Y, U;
                            if (visionResult.IsSucceed)
                            {
                                //披头偏差
                                //float offsetX = (float)(visionResult.X - currentPosition.X);
                                //float offsetY = (float)(visionResult.Y - currentPosition.Y);
                                string[] keys = { "X", "Y", "U" };
                                double[] values = { visionResult.X, visionResult.Y, visionResult.U };
                                for (int i = 0; i < keys.Length; i++)
                                {
                                    Point.Add(keys[i], values[i]);
                                }

                                // 2. 生成CSV文件（替换成你的保存路径）
                                string csvPath = @"D:\视觉检测数据\XYU结果.csv";
                                // 调用生成方法（appendMode=true 每次拍照新增一行，不会覆盖历史数据）
                                ExportDictionaryToCsv(Point, csvPath, appendMode: true);
                                //DowmCameraResults[cameraIndex] = new PointF(offsetX, offsetY);
                                //ExportDictionaryToCsv1(ProductMainSN[1], visionResult.X, visionResult.Y, visionResult.U);

                                await plc.WriteNodeAsync(addressConfig.Out_Screw_check_status.Address, (Int16)1);
                                return;
                            }
                            else
                            {
                                await plc.WriteNodeAsync(addressConfig.Out_Screw_check_status.Address, (Int16)2);
                                return;
                            }
                        }
                        else
                        {
                            SendTaskMessage(Lang.触发下相机拍照信号已关闭, MessageLevel.Alarm);
                            await plc.WriteNodeAsync(addressConfig.Out_Screw_check_status.Address, (Int16)0);
                        }
                    }
                }
                // 固定相机取料拍照
                else if (addressConfig.In_FixedCameraPickExe.Address.Contains(tuple.nodeId))
                {
                    if (tuple.value is bool state)
                    {
                        if (_LastFixedCameraPickExe != state)
                        {
                            _LastFixedCameraPickExe = state;
                        }
                        else
                        {
                            return;
                        }
                        if (state)
                        {
                            SendTaskMessage(Lang.触发固定相机取料拍照, MessageLevel.Debug);
                            //相机的编号
                            //Int16 cameraIndex = plc.ReadNode<Int16>(addressConfig.In_FixedCameraPickNum.Address);



                            await plc.WriteNodeAsync(addressConfig.Out_FixedCameraPickStatus.Address, (Int16)1);
                        }
                        else
                        {
                            SendTaskMessage(Lang.触发固定相机取料拍照信号已关闭, MessageLevel.Alarm);
                            await plc.WriteNodeAsync(addressConfig.Out_FixedCameraPickStatus.Address, (Int16)0);
                        }
                    }
                }
                // 固定相机锁附/组装拍照
                else if (addressConfig.In_FixedCameraPutExe.Address.Contains(tuple.nodeId))
                {
                    if (tuple.value is bool state)
                    {
                        if (_LastFixedCameraPutExe != state)
                        {
                            _LastFixedCameraPutExe = state;
                        }
                        else
                        {
                            return;
                        }
                        if (state)
                        {
                            SendTaskMessage(Lang.触发固定相机锁附组装拍照, MessageLevel.Debug);
                            //相机的编号
                            //Int16 cameraIndex = plc.ReadNode<Int16>(addressConfig.In_FixedCameraPutNum.Address);


                            await plc.WriteNodeAsync(addressConfig.Out_FixedCameraPutStatus.Address, (Int16)1);
                        }
                        else
                        {
                            SendTaskMessage(Lang.触发固定相机锁附组装拍照信号已关闭, MessageLevel.Alarm);
                            await plc.WriteNodeAsync(addressConfig.Out_FixedCameraPutStatus.Address, (Int16)0);
                        }
                    }
                }
                // 固定相机检测拍照
                else if (addressConfig.In_FixedCameracheckExe.Address.Contains(tuple.nodeId))
                {
                    if (tuple.value is bool state)
                    {
                        if (_LastFixedCameracheckExe != state)
                        {
                            _LastFixedCameracheckExe = state;
                        }
                        else
                        {
                            return;
                        }
                        if (state)
                        {
                            SendTaskMessage(Lang.触发固定相机检测拍照, MessageLevel.Debug);
                            //相机的编号
                            //Int16 cameraIndex = plc.ReadNode<Int16>(addressConfig.In_FixedCameracheckNum.Address);


                            await plc.WriteNodeAsync(addressConfig.Out_FixedCameracheckStatus.Address, (Int16)1);
                        }
                        else
                        {
                            SendTaskMessage(Lang.触发固定相机检测拍照信号已关闭, MessageLevel.Alarm);
                            await plc.WriteNodeAsync(addressConfig.Out_FixedCameracheckStatus.Address, (Int16)0);
                        }
                    }
                }
                // 翻转相机检测拍照
                else if (addressConfig.In_FzCameraPixExe.Address.Contains(tuple.nodeId))
                {
                    if (tuple.value is bool state)
                    {
                        if (_LastFzCameracheckExe != state)
                        {
                            _LastFzCameracheckExe = state;
                        }
                        else
                        {
                            return;
                        }
                        if (state)
                        {
                            int i = 5;
                            SendTaskMessage("触发翻转相机拍照", MessageLevel.Debug);
                            var code = plc.ReadNode<string>(string.Format(addressConfig.In_Code.Address, 1));

                            string resultphoto = "";
                            //这里缺少从MES获取产品配方的内容，需要补充

                            _LastMesCheckTime[5] = (await _mesService.GetServerTimeAsync(5, code, 2)).Now;
                            var stationConfig2 = _configService.GetDeviceInfo(0);
                            LogHelper.WriteLogMes($"【mes开始QUERY】");
                            SendTaskMessage($"mes开始QUERY", MessageLevel.Info);
                            //if (stationConfig2.EnableMES)
                            //{
                            //    (bool isSuccess, string response) = await _mesService.StationGetExAsync(code, "", 2);
                            //    if (isSuccess)
                            //    {
                            //        string ProductMainSN_Temp = "";
                            //        LogHelper.WriteLogMes($"询问mes成功");
                            //        SendTaskMessage($"询问mes成功:{response}", MessageLevel.Debug);
                            //        string[] item = response.Split('\n');
                            //        //获取过度件sn
                            //        string snItem = item.FirstOrDefault(f => f.Contains("sn="));
                            //        if (snItem != null)
                            //        {
                            //            ProductMainSN_Temp = snItem.Replace("sn=", "").Trim();

                            //            SendTaskMessage($"过度件sn：{ProductMainSN_Temp}", MessageLevel.Info);
                            //        }

                            //        LogHelper.WriteLogMes($"询问mes成功");
                            //        SendTaskMessage($"询问mes成功:{response}", MessageLevel.Debug);

                            //        //20260214,螺丝机特别版
                            //        (bool isSuccess2, string response2) = await _mesService.StationGetAsync(ProductMainSN_Temp, "", 2);//询问mes
                            //        if (isSuccess2)
                            //        {
                            //            LogHelper.WriteLogMes($"询问mes成功");
                            //            SendTaskMessage($"询问mes成功:{response2}", MessageLevel.Debug);

                            //            string[] items = response2.Split('\n');
                            //            //获取产品主sn和wo用于后续上传数据使用
                            //            string snItem2 = items.FirstOrDefault(f => f.Contains("sn="));
                            //            if (snItem2 != null)
                            //            {
                            //                var codesn = snItem2.Replace("sn=", "").Trim();
                            //                //_productService.CurrentProductCode = codesn;
                            //                SendTaskMessage($"产品主sn：{codesn}", MessageLevel.Info);
                            //            }
                            //            string woItem = item.FirstOrDefault(f => f.Contains("wo="));
                            //            if (woItem != null)
                            //            {
                            //                wo[i] = woItem.Replace("wo=", "").Trim();
                            //                SendTaskMessage($"工单信息：{wo[i]}", MessageLevel.Info);
                            //            }
                            //            string modelItem = item.FirstOrDefault(f => f.Contains("model_num="));
                            //            if (modelItem != null)
                            //            {
                            //                model_num[i] = modelItem.Replace("model_num=", "").Trim();
                            //                SendTaskMessage($"model_num：{model_num[i]}", MessageLevel.Info);
                            //            }
                            //            string colorItem = item.FirstOrDefault(f => f.Contains("color="));
                            //            if (colorItem != null)
                            //            {
                            //                color[i] = colorItem.Replace("color=", "").Trim();
                            //                SendTaskMessage($"color：{color[i]}", MessageLevel.Info);
                            //            }
                            //            string ppidItem = item.FirstOrDefault(f => f.Contains("ppid="));
                            //            if (ppidItem != null)
                            //            {
                            //                ppid[5] = ppidItem.Replace("ppid=", "").Trim();
                            //                SendTaskMessage($"ppid：{ppid[5]}", MessageLevel.Info);
                            //            }
                            //            string revisionItem = item.FirstOrDefault(f => f.Contains("stage="));
                            //            if (revisionItem != null)
                            //            {
                            //                revision[5] = revisionItem.Replace("stage=", "").Trim();
                            //                SendTaskMessage($"stage：{revision[5]}", MessageLevel.Info);
                            //            }
                            //            LogHelper.WriteLogMes($"第二次询问mes成功");
                            //            SendTaskMessage($"第二次询问mes成功:{response2}", MessageLevel.Debug);

                            //        }
                            //        else
                            //        {
                            //            LogHelper.WriteLogMes($"第二次询问mes失败");
                            //            SendTaskMessage($"第二次询问mes失败:{response2}", MessageLevel.Error);
                            //            await plc.WriteNodeAsync(addressConfig.Out_FzCameraPickStatus.Address, (Int16)2);
                            //            return;
                            //        }
                            //    }
                            //    else
                            //    {
                            //        LogHelper.WriteLogMes($"询问mes失败");
                            //        SendTaskMessage($"询问mes失败:{response}", MessageLevel.Error);
                            //        await plc.WriteNodeAsync(addressConfig.Out_FzCameraPickStatus.Address, (Int16)2);
                            //        return;
                            //    }
                            //}
                            //else
                            //{
                            //    SendTaskMessage($"mes未启用", MessageLevel.Info);
                            //}

                            Guid FzCameraProcedureId = currentProduct.FzCameraProcedureId;

                            var FzCameraProcess = _productService.GetCurrentProductProcedureModelById(FzCameraProcedureId);
                            if (FzCameraProcess == null)
                            {
                                SendTaskMessage($"未找到翻转相机视觉流程，流程ID: {FzCameraProcedureId}", MessageLevel.Alarm);
                                await plc.WriteNodeAsync(addressConfig.Out_FzCameraPickStatus.Address, (Int16)2);
                                return;
                            }
                            SendTaskMessage($"开始执行翻转相机视觉流程", MessageLevel.Debug);
                            var _cts = new CancellationTokenSource();

                            await _remoteCommandService.SetLightBeforePhoto(FzCameraProcess);
                            var FzCameraResult = _remoteCommandService.ExecutePhotoGetDistance(FzCameraProcess, null);

                            if (FzCameraResult)
                            {
                                SendTaskMessage("翻转相机拍照成功", MessageLevel.Debug);
                                resultphoto = "Pass";
                                await plc.WriteNodeAsync(addressConfig.Out_FzCameraPickStatus.Address, (Int16)1);

                            }
                            else
                            {
                                SendTaskMessage("翻转相机拍照失败", MessageLevel.Alarm);
                                resultphoto = "Fail";
                                await plc.WriteNodeAsync(addressConfig.Out_FzCameraPickStatus.Address, (Int16)2);
                            }
                            if (stationConfig2.SaveCsv)
                            {
                                List<DataFormCtq> DFC = new List<DataFormCtq>();
                                string saveppid = "NA";
                                string names = currentProduct.Name;
                                if (stationConfig2.SaveCsvPPID) saveppid = ppid[i];
                                DateTime servertime = DateTime.Now;
                                // Dictionary<string, double> adjacentDiffDict1 = GetAdjacentDiffDict(keyData1);
                                //判断锁付路径字符串是否为空，如果不为空则保存，否则不保存
                                if (!string.IsNullOrEmpty(stationConfig2.SaveCsvPath))
                                {

                                    DFC.Add(new DataFormCtq
                                    {
                                        PPID = saveppid,
                                        PROCESS_NAME = stationConfig2.DataInfo.PROCESS_NAME,
                                        PROCESS_START_TIME = _LastMesCheckTime[5].ToString("yyyy-MM-ddTHH:mm:ss.fffffff") + "+08:00",
                                        CTQ_NAME = "FzCameraPhoto",
                                        CTQ_VALUE = 0,
                                        CTQ_LSL = 0,
                                        CTQ_USL = 0,
                                        PROCESS_END_TIME = servertime.ToString("yyyy-MM-ddTHH:mm:ss.fffffff") + "+08:00",
                                        SUPPLIER_NAME = stationConfig2.DataInfo.SUPPLIER_NAME,
                                        COMMODITY_TYPE = stationConfig2.DataInfo.COMMODITY_TYPE,
                                        REVISION = stationConfig2.DataInfo.REVISION + "_" + revision[i],
                                        WO = "wo",//
                                        MFG_LOT = stationConfig2.DataInfo.MFG_LOT,//
                                        MFG_ASSY_LINE = stationConfig2.DataInfo.MFG_ASSY_LINE,
                                        PROCESS_OUTCOME = resultphoto,
                                        PROCESS_MACHINE_ID = stationConfig2.DataInfo.PROCESS_MACHINE_ID,
                                        CTQ_UNIT_OF_MEASURE = "mm",
                                        ERROR_MESSAGE = "",
                                        PD_ATTR_01 = _productService.CurrentProductCode,//
                                        PD_ATTR_02 = "",
                                        PD_ATTR_03 = "",
                                        PD_ATTR_04 = code,
                                        PD_ATTR_05 = "",
                                    });
                                    bool recordResult = RecordStationResult(0, DFC, _productService.CurrentProductCode, servertime.Subtract(_LastMesCheckTime[5]).TotalSeconds, _LastMesCheckTime[5], stationConfig2.SaveCsvPath);
                                    if (recordResult)
                                    {
                                        SendTaskMessage($"翻转相机拍照产品记录保存成功", MessageLevel.Debug);
                                    }
                                    else
                                    {
                                        SendTaskMessage($"{stationConfig2.DeviceName}产品记录保存失败", MessageLevel.Error);
                                    }
                                }
                                else
                                {
                                    SendTaskMessage($"{stationConfig2.DeviceName}工位未配置保存路径，无法保存产品记录", MessageLevel.Error);
                                }
                            }
                        }
                        else
                        {
                            SendTaskMessage($"触发翻转相机检测拍照信号已关闭", MessageLevel.Alarm);
                            await plc.WriteNodeAsync(addressConfig.Out_FzCameraPickStatus.Address, (Int16)0);
                        }
                    }
                }
                // 开始锁付
                else if (addressConfig.In_WorkStart.Address.Contains(tuple.nodeId))
                {

                    if (tuple.value is Int16 state)
                    {
                        if (_LastWorkStart != state)
                        {
                            _LastWorkStart = state;
                        }
                        else
                        {
                            return;
                        }
                        var code = plc.ReadNode<string>(string.Format(addressConfig.In_Code.Address, 0));
                        if (state == 1)
                        {
                            SendTaskMessage(Lang.收到开始锁付信号, MessageLevel.Debug);
                            StartScrewTime = DateTime.Now;
                            //位置编号
                            Int16 positionIndex = plc.ReadNode<Int16>(addressConfig.In_ProductNum.Address);
                            SendTaskMessage(string.Format(Lang.编号0, positionIndex), MessageLevel.Info);
                            // 开始采集压力值,ProductMainSN[i]
                            //StartPressureCollection(currentProduct.Name, _productService.CurrentProductCode, 0);
                            StartPressureCollection(currentProduct.Name, _productService.CurrentProductCode, 0);
                        }
                        else
                        {
                            SendTaskMessage(Lang.开始锁付信号已关闭, MessageLevel.Alarm);
                            // 关闭时的处理（如需）可放在这里
                        }
                    }
                }
                // 停止锁付
                else if (addressConfig.In_WorkDone.Address.Contains(tuple.nodeId))
                {
                    if (tuple.value is Int16 state)
                    {
                        if (_LastWorkDone != state)
                        {
                            _LastWorkDone = state;
                        }
                        else
                        {
                            return;
                        }
                        if (state == 1 || state == 2)
                        {
                            if (TorqueStatus)
                            {

                            }
                            SendTaskMessage(Lang.收到停止锁付信号, MessageLevel.Debug);
                            //位置编号
                            Int16 positionIndex = plc.ReadNode<Int16>(addressConfig.In_ProductNum.Address);
                            SendTaskMessage(string.Format(Lang.编号0, positionIndex), MessageLevel.Info);

                            //获取当前锁付点
                            var screwPoint = currentProduct.ScrewPoints.FirstOrDefault(p => p.Number == positionIndex);
                            //获取当前的机器人点位
                            var robot = _robotService.GetAllRobots().FirstOrDefault();
                            var currentPosition = robot.GetRobotPos();
                            //读取压力值
                            float pressure = _maxPressure;
                            //当前用户名
                            string currentUserName = _systemDatabaseService.GetCurrentUser().UserName;

                            //吸嘴最后一次的记录
                            var nozzleRecord = await _systemDatabaseService.GetLatestNozzleChangeRecordAsync();
                            //最后一次的吸嘴编号
                            string nozzleNumber = nozzleRecord != null ? nozzleRecord.NozzleBatchNumber : "N/A";
                            //披头最后一次的记录
                            var headRecord = await _systemDatabaseService.GetLatestHeadChangeRecordAsync();
                            //最后一次的披头编号
                            string headNumber = headRecord != null ? headRecord.HeadBatchNumber : "N/A";

                            await Task.Delay(60);
                            //获取电批结果
                            bool isSucced = ScrewDriver.GetData();
                            LockResult lockResult = new LockResult();
                            lockResult.ScrewdriverGetDataSucceed = isSucced;
                            lockResult.Number = positionIndex;
                            lockResult.LockPassed = ScrewDriver.Success;
                            lockResult.ProductName = currentProduct.Name;
                            lockResult.ProductNumber = _productService.CurrentProductCode;
                            lockResult.LockTurns = (float)ScrewDriver.Truns;
                            lockResult.LockTorque = (float)ScrewDriver.TorqueValue;
                            lockResult.LockDuration = (float)ScrewDriver.FinalTime;
                            lockResult.ScrewdriverProgramNumber = ScrewDriver.ProgramNumber;
                            lockResult.ResultDetails = ScrewDriver.ErrorInfo;
                            lockResult.Pressure = pressure;
                            lockResult.TargetTorqueUpperLimit = ScrewDriver.TargetTorqueUpperLimit;
                            lockResult.TargetTorqueLowerLimit = ScrewDriver.TargetTorqueLowerLimit;
                            lockResult.TargetTurnsUpperLimit = ScrewDriver.TargetTurnsUpperLimit / 360;
                            lockResult.TargetTurnsLowerLimit = ScrewDriver.TargetTurnsLowerLimit / 360;
                            lockResult.TargetLockSpeed = ScrewDriver.TargetLockSpeed;
                            lockResult.PositionX = currentPosition.X;
                            lockResult.PositionY = currentPosition.Y;
                            lockResult.StartPositionZ = screwPoint.Z_Position_Start;
                            lockResult.EndPositionZ = currentPosition.Z;
                            lockResult.LockDescentSpeed = screwPoint.Z_Velocity_Stop;
                            lockResult.FeederNumber = screwPoint != null ? screwPoint.Feeder : 0;
                            lockResult.NozzleNumber = nozzleNumber;
                            lockResult.HeadNumber = headNumber;
                            lockResult.OperatorName = currentUserName;
                            lockResult.ProductImagePath = "";
                            lockResult.WaveDatas = ScrewDriver.WaveDatas;

                            //pressure = 0;
                            //获取系统参数
                            var systemConfig = _configService.GetSystemConfiguration();
                            //判断是否保存锁付曲线
                            if (systemConfig.IsSaveScrewCurve)
                            {
                                //锁付曲线的保存路径为：systemConfig.ScrewCurvePath//年月//年月日//配方名//产品SN//产品SN+螺丝索引
                                string datePath = DateTime.Now.ToString("yyyy-MM") + "\\" + DateTime.Now.ToString("yyyy-MM-dd") + "\\";
                                string dirPath = System.IO.Path.Combine(systemConfig.ScrewCurvePath, datePath, currentProduct.Name, lockResult.ProductNumber);
                                if (!Directory.Exists(dirPath))
                                {
                                    Directory.CreateDirectory(dirPath);
                                }
                                string curveFileName = $"{lockResult.ProductNumber}-{lockResult.Number}.png";
                                //锁付CSV保存路径
                                string curveFileFullPath = System.IO.Path.Combine(dirPath, $"{lockResult.ProductNumber}-{lockResult.Number}.csv");

                                //锁付曲线保存路径
                                lockResult.LockCurveImagePath = System.IO.Path.Combine(dirPath, curveFileName);
                                var _ = lockResult.SaveToCsvAsync(curveFileFullPath);
                            }
                            if (lockResult.Number == 1)
                            {
                                dataToMes.Clear();
                                resultToMes.Clear();
                                lockResultsAll.Clear();
                            }

                            //基于当前的锁付结果和产品的规格参数判断锁付结果是否合格
                            var stationConfig = _configService.GetDeviceInfo(0);
                            bool torqueRes = false, turnRes = false, pressureRes = false;
                            bool lastRes = false;//默认不合格，只有当扭力、圈数、压力都在设定的上下限范围内时，才判定为锁付合格
                            if (lockResult.LockTorque >= lockResult.TargetTorqueLowerLimit && lockResult.LockTorque <= lockResult.TargetTorqueUpperLimit)
                            {
                                torqueRes = true;
                            }
                            if (lockResult.Pressure >= stationConfig.DataInfo.CTQ_LSL_Pressure && lockResult.Pressure <= stationConfig.DataInfo.CTQ_USL_Pressure)
                            {
                                pressureRes = true;
                            }
                            if (lockResult.LockTurns >= lockResult.TargetTurnsLowerLimit && lockResult.LockTurns <= lockResult.TargetTurnsUpperLimit)
                            {
                                turnRes = true;
                            }
                            if (torqueRes == true && turnRes == true && pressureRes == true)//当扭力、圈数、压力都在设定的上下限范围内时，才判定为锁付合格
                            {
                                lastRes = true;
                            }
                            if (dataToMes.Keys.Contains($"Torque{lockResult.Number}"))
                            {
                                dataToMes.Remove($"Torque{lockResult.Number}");
                            }
                            if (dataToMes.Keys.Contains($"Turn{lockResult.Number}"))
                            {
                                dataToMes.Remove($"Turn{lockResult.Number}");
                            }
                            if (dataToMes.Keys.Contains($"Pressure{lockResult.Number}"))
                            {
                                dataToMes.Remove($"Pressure{lockResult.Number}");
                            }
                            lockResult.LockPassed = lastRes;
                            dataToMes.Add($"Torque{lockResult.Number}", $"{lockResult.LockTorque:F2}");
                            dataToMes.Add($"Turn{lockResult.Number}", $"{lockResult.LockTurns:F2}");
                            dataToMes.Add($"Pressure{lockResult.Number}", $"{lockResult.Pressure:F2}");
                            //dataToMes.Add($"LastResult{lockResult.Number}", $"{lastRes}");
                            if (!lastRes)//如果不合格，则在MES结果中添加"Screw{lockResult.Number}_Fail"
                            {
                                if (!resultToMes.Contains($"Screw{lockResult.Number}_Fail"))
                                {
                                    resultToMes.Add($"Screw{lockResult.Number}_Fail");
                                    SendTaskMessage($"Screw{lockResult.Number}:锁附不合格", MessageLevel.Error);
                                }
                            }
                            SendTaskMessage($"螺丝序号:{lockResult.Number},扭力:{lockResult.LockTorque},压力:{lockResult.Pressure},圈数:{lockResult.LockTurns}", MessageLevel.Info);
                            _maxPressure = 0;
                            lockResultsAll.Add(lockResult);
                            App.Current.Dispatcher.Invoke(() =>
                            {
                                _eventAggregator.GetEvent<LockFinishNotification>().Publish(lockResult);
                            });
                            //记录锁付结果至数据库
                            await _systemDatabaseService.RecordLockResultAsync(lockResult);
                            //披头数量+1
                            NumStatistics.HeaderNum = await _systemDatabaseService.IncrementLatestHeadLockCountAsync(currentUserName);
                            //吸嘴数量+1
                            NumStatistics.NozzleNum = await _systemDatabaseService.IncrementLatestNozzleLockCountAsync(currentUserName);


                            await plc.WriteNodeAsync(addressConfig.In_WorkDone.Address, (Int16)0);
                            // 停止采集压力并保存
                            await StopAndSavePressureCollectionAsync(currentProduct.Name, _productService.CurrentProductCode, positionIndex);
                            pressure = 0;
                        }
                        else
                        {
                            SendTaskMessage(Lang.停止锁付信号已关闭, MessageLevel.Alarm);
                        }
                    }
                }
                // 多相机坐标合并
                else if (addressConfig.In_RequestPosition.Address.Contains(tuple.nodeId))
                {
                    if (tuple.value is Int16 state)
                    {
                        if (_LastRequestPosition != state)
                        {
                            _LastRequestPosition = state;
                        }
                        else
                        {
                            return;
                        }
                        if (state == 1)
                        {                           
                            SendTaskMessage(Lang.收到多相机坐标合并请求开始合并, MessageLevel.Debug);
                            //位置编号
                            Int16 positionIndex = plc.ReadNode<Int16>(addressConfig.In_ProductNum.Address);
                            //是拍一个锁一个还是拍两个点锁所有
                            var systemConfig = _configService.GetSystemConfiguration();
                            //拍1打1 
                            if (systemConfig.WorkMode == 1)
                            {
                                List<PlcPoint> plcPoints = new List<PlcPoint>();
                                foreach (var item in currentProduct.ScrewPoints)
                                {
                                    if (item.IsUse)
                                    {
                                        plcPoints.Add(item);
                                    }
                                }
                                var TempPoint = plcPoints[positionIndex - 1];
                                if (TempPoint == null)
                                {
                                    SendTaskMessage($"点：{positionIndex}不存在", MessageLevel.Info);
                                    await plc.WriteNodeAsync(addressConfig.Out_CameraDone.Address, (Int16)2);
                                    return;
                                }
                                var PositionPoint = TempPoint.Clone();
                                PositionPoint.X_Position = UpCameraPutResults[1].X + DowmCameraResults[1].X;
                                PositionPoint.Y_Position = UpCameraPutResults[1].Y + DowmCameraResults[1].Y;
                                SendTaskMessage($"点：{positionIndex}，{PositionPoint.X_Position:F3}，{PositionPoint.Y_Position:F4}", MessageLevel.Info);
                                if (PositionPoint.X_Position == 0 || PositionPoint.Y_Position == 0)
                                {
                                    SendTaskMessage("拟合位置为0，请检查", MessageLevel.Error);
                                    await plc.WriteNodeAsync(addressConfig.Out_CameraDone.Address, (Int16)2);
                                    return;
                                }
                                if (_configService.GetDeviceInfo().EnableXY)
                                {
                                    //验证当前锁附点位与设置锁附点位的差值是否超限，超限则报警并停止流程
                                    //目前验证已OK 缺少切换按钮
                                    try
                                    {
                                        var ScrewLimit = currentProduct.GlobalParamListCollection.FirstOrDefault((p) => p.Number == positionIndex - 1);
                                        //判断实际偏差与设置的点位差数是否偏差过大
                                        float XOffsetPoint = Math.Abs(PositionPoint.X_Position - (TempPoint.X_Position + TempPoint.X_Offset));
                                        float YOffsetPoint = Math.Abs(PositionPoint.Y_Position - (TempPoint.Y_Position + TempPoint.Y_Offset));
                                        if (!(XOffsetPoint >= float.Parse(ScrewLimit.Param1) && XOffsetPoint <= float.Parse(ScrewLimit.Param2)) ||
                                            !(YOffsetPoint >= float.Parse(ScrewLimit.Param3) && YOffsetPoint <= float.Parse(ScrewLimit.Param4)))
                                        {
                                            SendTaskMessage($"当前锁附点位{positionIndex}与设置锁附点位差值超限,X偏差:{XOffsetPoint}，Y偏差{YOffsetPoint}", MessageLevel.Error);
                                            await plc.WriteNodeAsync(addressConfig.Out_CameraDone.Address, (Int16)2);
                                            return;
                                        }
                                    }
                                    catch (Exception ex)
                                    {
                                        SendTaskMessage($"当前锁附点位与设置锁附点位差值未设置:" + ex.Message, MessageLevel.Error);
                                        await plc.WriteNodeAsync(addressConfig.Out_CameraDone.Address, (Int16)2);
                                        return;
                                    }
                                }
                                await PositionPoint.WriteToPlcAddress(addressConfig.Out_Screw, plc, positionIndex);
                            }
                            //拍2打所有
                            else if (systemConfig.WorkMode == 2)
                            {
                                //根据UpCameraPutResults[]中的索引1、2，和拍照点对应的Local下的坐标，从创建Local坐标系
                                PointF worldP1 = new PointF(UpCameraPutResults[1].X, UpCameraPutResults[1].Y);
                                PointF worldP2 = new PointF(UpCameraPutResults[2].X, UpCameraPutResults[2].Y);
                                PointF localP1 = new PointF(currentProduct.ScrewCameraLocalPos1.X_Position, currentProduct.ScrewCameraLocalPos1.Y_Position);
                                PointF localP2 = new PointF(currentProduct.ScrewCameraLocalPos2.X_Position, currentProduct.ScrewCameraLocalPos2.Y_Position);
                                CoordinateTransformer local = new CoordinateTransformer(worldP1, worldP2, localP1, localP2);

                                for (int i = 0; i < currentProduct.ScrewPoints.Count; i++)
                                {
                                    var localPoint = new PointF(currentProduct.ScrewPoints[i].X_Position + currentProduct.ScrewPoints[i].X_Offset,
                                        currentProduct.ScrewPoints[i].Y_Position + currentProduct.ScrewPoints[i].Y_Offset);
                                    var worldPoint = local.ToOldCoord(localPoint.X, localPoint.Y);
                                    var point = currentProduct.ScrewPoints[i].Clone();

                                    //锁付点位在Local中已经加了偏移，这里写回PLC时需要将偏移清零，否则写入PLC端时会重复计算偏移
                                    point.X_Offset = 0;
                                    point.Y_Offset = 0;
                                    point.X_Position = (float)worldPoint[0];
                                    point.Y_Position = (float)worldPoint[1];
                                    SendTaskMessage($"点：{i}，{point.X_Position:F3}，{point.Y_Position:F4}", MessageLevel.Info);
                                    if (_configService.GetDeviceInfo().ScrewOverrun)
                                    {
                                        try
                                        {
                                            var ScrewLimit = currentProduct.GlobalParamListCollection.FirstOrDefault((p) => p.Number == positionIndex - 1);
                                            //判断实际偏差与设置的点位差数是否偏差过大
                                            float XOffsetPoint = Math.Abs(localPoint.X - (float)worldPoint[0]);
                                            float YOffsetPoint = Math.Abs(localPoint.Y - (float)worldPoint[1]);
                                            if ((XOffsetPoint >= float.Parse(ScrewLimit.Param1) && XOffsetPoint <= float.Parse(ScrewLimit.Param2)) ||
                                                (YOffsetPoint >= float.Parse(ScrewLimit.Param3) && YOffsetPoint <= float.Parse(ScrewLimit.Param4)))
                                            {
                                                SendTaskMessage($"当前锁附点位{i}与设置锁附点位差值超限,X偏差:{XOffsetPoint}，Y偏差{YOffsetPoint}", MessageLevel.Error);
                                                await plc.WriteNodeAsync(addressConfig.Out_CameraDone.Address, (Int16)2);
                                                return;
                                            }
                                        }
                                        catch (Exception ex)
                                        {
                                            SendTaskMessage($"当前锁附点位与设置锁附点位差值超限:" + ex.Message, MessageLevel.Error);
                                            await plc.WriteNodeAsync(addressConfig.Out_CameraDone.Address, (Int16)2);
                                        }
                                    }
                                    await point.WriteToPlcAddress(addressConfig.Out_Screw, plc);
                                }
                                await plc.WriteNodeAsync(addressConfig.Out_WorkNum.Address, (Int16)currentProduct.ScrewPoints.Count);
                            }
                            //拍2打所有
                            else if (systemConfig.WorkMode == 3)
                            {
                                if (positionIndex <= 3)
                                {
                                    List<PlcPoint> plcPoints = new List<PlcPoint>();
                                    foreach (var item in currentProduct.ScrewPoints)
                                    {
                                        if (item.IsUse)
                                        {
                                            plcPoints.Add(item);
                                        }
                                    }
                                    var point = plcPoints[positionIndex - 1];
                                    if (point == null)
                                    {
                                        SendTaskMessage($"点：{positionIndex}不存在", MessageLevel.Info);
                                        await plc.WriteNodeAsync(addressConfig.Out_CameraDone.Address, (Int16)2);
                                        return;
                                    }
                                    point = point.Clone();
                                    point.X_Position = UpCameraPutResults[1].X + DowmCameraResults[1].X;
                                    point.Y_Position = UpCameraPutResults[1].Y + DowmCameraResults[1].Y;
                                    SendTaskMessage($"点：{positionIndex}，{point.X_Position:F3}，{point.Y_Position:F4}", MessageLevel.Info);
                                    await point.WriteToPlcAddress(addressConfig.Out_Screw, plc, positionIndex);
                                }
                                else
                                {
                                    //根据UpCameraPutResults[]中的索引1、2，和拍照点对应的Local下的坐标，从创建Local坐标系
                                    PointF worldP1 = new PointF(UpCameraPutResults[4].X, UpCameraPutResults[4].Y);
                                    PointF worldP2 = new PointF(UpCameraPutResults[5].X, UpCameraPutResults[5].Y);
                                    PointF localP1 = new PointF(currentProduct.ScrewCameraLocalPos1.X_Position, currentProduct.ScrewCameraLocalPos1.Y_Position);
                                    PointF localP2 = new PointF(currentProduct.ScrewCameraLocalPos2.X_Position, currentProduct.ScrewCameraLocalPos2.Y_Position);
                                    CoordinateTransformer local = new CoordinateTransformer(worldP1, worldP2, localP1, localP2);

                                    for (int i = 0; i < currentProduct.ScrewPoints.Count; i++)
                                    {
                                        var localPoint = new PointF(currentProduct.ScrewPoints[i].X_Position + currentProduct.ScrewPoints[i].X_Offset,
                                            currentProduct.ScrewPoints[i].Y_Position + currentProduct.ScrewPoints[i].Y_Offset);
                                        var worldPoint = local.ToOldCoord(localPoint.X, localPoint.Y);
                                        var point = currentProduct.ScrewPoints[i].Clone();

                                        //锁付点位在Local中已经加了偏移，这里写回PLC时需要将偏移清零，否则写入PLC端时会重复计算偏移
                                        point.X_Offset = 0;
                                        point.Y_Offset = 0;
                                        point.X_Position = (float)worldPoint[0];
                                        point.Y_Position = (float)worldPoint[1];
                                        SendTaskMessage($"点：{i}，{point.X_Position:F3}，{point.Y_Position:F4}", MessageLevel.Info);
                                        await point.WriteToPlcAddress(addressConfig.Out_Screw, plc);
                                    }
                                    await plc.WriteNodeAsync(addressConfig.Out_WorkNum.Address, (Int16)currentProduct.ScrewPoints.Count);
                                }
                            }
                            await plc.WriteNodeAsync(addressConfig.Out_CameraDone.Address, (Int16)1);
                        }
                        else
                        {
                            SendTaskMessage(string.Format(Lang.多相机坐标合并请求已结束或被取消state0, state), MessageLevel.Alarm);
                            await plc.WriteNodeAsync(addressConfig.Out_CameraDone.Address, (Int16)0);
                        }
                    }
                }
                // PLC请求二维码拍照位置
                else if (addressConfig.In_QrCodePhotoRequest.Address.Contains(tuple.nodeId))
                {
                    if (tuple.value is Int16 state)
                    {
                        if (_LastQrCodePhotoRequest != state)
                        {
                            _LastQrCodePhotoRequest = state;
                        }
                        else
                        {
                            return;
                        }

                        if (state == 1)
                        {
                            SendTaskMessage("收到PLC二维码拍照位置请求", MessageLevel.Debug);
                            if (currentProduct.QrCodePoints == null || currentProduct.QrCodePoints.Count == 0)
                            {
                                SendTaskMessage("未找到示教后的二维码拍照点位", MessageLevel.Alarm);
                                await plc.WriteNodeAsync(addressConfig.Out_QrCodePhotoResault.Address, (Int16)2);
                                return;
                            }
                            var qrpoint = currentProduct.QrCodePoints[0];
                            //发送点位
                            bool SendSuccess = await qrpoint.WriteToPlcAddress(addressConfig.Out_QrCodeCamera, plc);
                            if (SendSuccess)
                            {
                                SendTaskMessage("二维码拍照点位发送成功", MessageLevel.Alarm);
                                await plc.WriteNodeAsync(addressConfig.Out_QrCodePhotoResault.Address, (Int16)1);

                                Guid qrCodeProcedureId = currentProduct.QrCodeProcedureId;
                                if (qrCodeProcedureId == Guid.Empty)
                                {
                                    // 如果没有配置二维码视觉流程，直接返回成功
                                    SendTaskMessage("未配置二维码视觉流程，跳过扫码", MessageLevel.Info);
                                    return;
                                }
                            }
                            else
                            {
                                SendTaskMessage("二维码拍照点位发送失败", MessageLevel.Alarm);
                                await plc.WriteNodeAsync(addressConfig.Out_QrCodePhotoResault.Address, (Int16)2);
                            }
                        }
                        else
                        {
                            SendTaskMessage("二维码拍照点位发送信号已关闭", MessageLevel.Alarm);
                            await plc.WriteNodeAsync(addressConfig.Out_QrCodePhotoResault.Address, (Int16)0);
                        }
                    }

                }
                // 螺丝供料器螺丝递减
                else if (addressConfig.In_PickINC.Address.Contains(tuple.nodeId))
                {
                    if (tuple.value is Int16 state)
                    {
                        if (_LastPickINC != state)
                        {
                            _LastPickINC = state;
                        }
                        else
                        {
                            return;
                        }
                        if (state != 0)
                        {
                            SendTaskMessage($"螺丝供料器...", MessageLevel.Info);
                            await plc.WriteNodeAsync(addressConfig.In_PickINC.Address, (Int16)0);

                            var feeders = _configService.GetRemainingCountByFeederNumber(state);
                            if (state == 1)
                            {
                                NumStatistics.Feeder1Num = _configService.DecrementScrewCountByFeederNumber(feeders);
                            }
                            else if (state == 2)
                            {
                                NumStatistics.Feeder2Num = _configService.DecrementScrewCountByFeederNumber(feeders);
                            }
                        }
                    }
                }
                // 抛料计数
                else if (addressConfig.In_Throw.Address.Contains(tuple.nodeId))
                {
                    if (tuple.value is bool state)
                    {
                        if (_LastThrowExe != state)
                        {
                            _LastThrowExe = state;
                        }
                        else
                        {
                            return;
                        }
                        if (state)
                        {
                            SendTaskMessage("收到抛料信号", MessageLevel.Info);
                            await _systemDatabaseService.RecordThrowNumberAsync(new ThrowRecord()
                            {
                                DayTime = DateTime.Now,
                                ThrowCount = 1
                            });
                        }
                    }
                }
                // 切换成自动运行模式
                else if (addressConfig.AutoRunning.Address.Contains(tuple.nodeId))
                {
                    if (tuple.value is bool state)
                    {
                        if (_LastAutoRunning != state)
                        {
                            _LastAutoRunning = state;
                        }
                        else
                        {
                            return;
                        }

                        if (state)
                        {
                            SendTaskMessage("收到切换成自动模式", MessageLevel.Info);
                        }
                        else
                        {
                            SendTaskMessage("收到关闭自动模式", MessageLevel.Info);
                        }

                        CurrentRunStatus();
                    }
                }
                // 切换成维修模式
                else if (addressConfig.ManualMode.Address.Contains(tuple.nodeId))
                {
                    if (tuple.value is bool state)
                    {
                        if (_LastManualMode != state)
                        {
                            _LastManualMode = state;
                        }
                        else
                        {
                            return;
                        }

                        if (state)
                        {
                            SendTaskMessage("收到切换成维修模式", MessageLevel.Info);
                        }
                        else
                        {
                            SendTaskMessage("收到退出维修模式", MessageLevel.Info);
                        }

                        CurrentRunStatus();
                    }
                }
                // 切换成流线模式
                else if (addressConfig.ClearMode.Address.Contains(tuple.nodeId))
                {
                    if (tuple.value is bool state)
                    {
                        if (_LastClearMode != state)
                        {
                            _LastClearMode = state;
                        }
                        else
                        {
                            return;
                        }

                        if (state)
                        {
                            SendTaskMessage("收到切换成流线模式", MessageLevel.Info);
                        }
                        else
                        {
                            SendTaskMessage("收到退出流线模式", MessageLevel.Info);
                        }

                        CurrentRunStatus();
                    }
                }
                //plc报警
                else if (addressConfig.Fault.Address.Contains(tuple.nodeId))
                {
                    if (tuple.value is bool state)
                    {
                        if (_LastFault != state)
                        {
                            _LastFault = state;
                        }
                        else
                        {
                            return;
                        }
                        if (state)
                        {
                            SendAlarmToUi(plc);
                            SendTaskMessage("收到PLC报警", MessageLevel.Error);
                        }
                        else
                        {
                            SendTaskMessage("收到PLC消除报警", MessageLevel.Debug);
                        }
                    }
                }
                // 过站检查
                else
                {
                    for (int i = 0; i < 10; i++)
                    {
                        if (string.Format(addressConfig.In_MesCheck.Address, i).Contains(tuple.nodeId))
                        {
                            if (tuple.value is Int16 state)
                            {

                                //var oldState = _LastMesCheck[i];
                                //_LastMesCheck[i] = state;
                                //SendTaskMessage($"站点{i},收到PLC状态为:{state},旧状态为:{oldState}",MessageLevel.Info);
                                //if (oldState == state)
                                //{
                                //    return;
                                //}

                                if (_LastMesCheck[i] != state)
                                {
                                    _LastMesCheck[i] = state;
                                }
                                else
                                {
                                    return;
                                }
                                var systemConfig = _configService.GetSystemConfiguration();

                                string code = "";
                                //plc启用的模式
                                bool models = plc.ReadNode<bool>(addressConfig.Cam_code_mode.Address);

                                if (models && state == 1)
                                {
                                    //拍照读码
                                    SendTaskMessage(Lang.触发上相机锁附组装拍照, MessageLevel.Debug);
                                    //相机的编号
                                    Int16 cameraIndex = plc.ReadNode<Int16>(addressConfig.In_UpCameraPutNum.Address);
                                    SendTaskMessage(string.Format(Lang.编号0, cameraIndex), MessageLevel.Info);

                                    Guid qrCodeProcedureId = currentProduct.QrCodeProcedureId;

                                    //视觉流程ID
                                    var qrCodeProcess = _productService.GetCurrentProductProcedureModelById(qrCodeProcedureId);
                                    if (qrCodeProcess == null)
                                    {
                                        SendTaskMessage($"未找到二维码视觉流程，流程ID: {qrCodeProcedureId}", MessageLevel.Alarm);
                                        await plc.WriteNodeAsync(addressConfig.Out_QrCodePhotoResault.Address, (Int16)2);
                                        return;
                                    }
                                    SendTaskMessage($"开始执行二维码扫码视觉流程", MessageLevel.Debug);
                                    var _cts = new CancellationTokenSource();

                                    await _remoteCommandService.SetLightBeforePhoto(qrCodeProcess);
                                    var qrCodeResult = _remoteCommandService.ExecutePhoto(i + 1, qrCodeProcess, out CogToolBlockTerminalCollection outputCollection);

                                    if (qrCodeResult && outputCollection.Contains("QR"))
                                    {
                                        code = outputCollection["QR"].Value as string;
                                        code = code.ToUpper();
                                        if (!string.IsNullOrEmpty(code) && code.Length > 5)
                                        {
                                            if (systemConfig.IsBasePartCodeChooseScrew)//是否基于零件码，判断是不是当站要打的螺丝
                                            {
                                                var val = CheckCode(code, systemConfig.ChooseScrewModel);
                                                if (val)
                                                {
                                                    SendTaskMessage($"是当站螺丝:{code}", MessageLevel.Info);
                                                    await plc.WriteNodeAsync(addressConfig.Out_QrCodePhotoResault.Address, (Int16)1);
                                                }
                                                else
                                                {
                                                    SendTaskMessage($"不是当站螺丝:{code}", MessageLevel.Info);
                                                    await plc.WriteNodeAsync(addressConfig.Out_QrCodePhotoResault.Address, (Int16)2);
                                                    await plc.WriteNodeAsync(string.Format(addressConfig.Out_MesStatus.Address, i), (Int16)3);
                                                    return;
                                                }
                                            }

                                            bool _isSuccess = plc.WriteNode<string>(string.Format(addressConfig.In_Code.Address, 0), code);
                                            if (_isSuccess)
                                            {
                                                SendTaskMessage($"二维码扫码成功:{code}", MessageLevel.Info);
                                                await plc.WriteNodeAsync(addressConfig.Out_QrCodePhotoResault.Address, (Int16)1);
                                            }
                                            else
                                            {
                                                SendTaskMessage($"二维码扫码成功:{code}", MessageLevel.Info);
                                                SendTaskMessage($"发送plc二维码失败:{code}", MessageLevel.Error);
                                                await plc.WriteNodeAsync(addressConfig.Out_QrCodePhotoResault.Address, (Int16)2);
                                            }

                                        }
                                        else
                                        {
                                            SendTaskMessage("二维码扫码失败", MessageLevel.Alarm);
                                            await plc.WriteNodeAsync(addressConfig.Out_QrCodePhotoResault.Address, (Int16)2);
                                            await plc.WriteNodeAsync(string.Format(addressConfig.Out_MesStatus.Address, i), (Int16)2);
                                            return;
                                        }
                                    }
                                    else
                                    {
                                        code = "";
                                        SendTaskMessage("二维码扫码失败", MessageLevel.Alarm);
                                        await plc.WriteNodeAsync(addressConfig.Out_QrCodePhotoResault.Address, (Int16)2);
                                        await plc.WriteNodeAsync(string.Format(addressConfig.Out_MesStatus.Address, i), (Int16)2);
                                        return;
                                    }
                                }
                                else
                                {
                                    code = plc.ReadNode<string>(string.Format(addressConfig.In_Code.Address, i));
                                }

                                if (!(i == 0 || i == 7))
                                {
                                    return;
                                }

                                productSn = code;
                                SendTaskMessage($"收到plc信号{state}", MessageLevel.Debug);
                                //询问mes
                                if (state == 1)
                                {

                                    SendTaskMessage($"收到{i}过站检查请求（当站是否生产）...", MessageLevel.Debug);
                                    //获取过站时间
                                    _LastMesCheckTime[i] = (await _mesService.GetServerTimeAsync(i, code, 2)).Now;
                                    if (_configService.GetDeviceInfo().EnableMES)
                                    {
                                        LogHelper.WriteLogMes($"【mes开始QUERY】");
                                        SendTaskMessage($"mes开始QUERY", MessageLevel.Info);
                                        //dataToMes.Clear();
                                        if (systemConfig.IsBasePartCodeGetSN)//是否基于零件码,判断是否过站
                                        {
                                            SendTaskMessage($"基于零件码,判断是否过站", MessageLevel.Debug);
                                            (bool isSuccess, string response) = await _mesService.StationGetExAsync(code, "", 2);//基于电池的SN获取产品SN，询问mes
                                            if (isSuccess)
                                            {
                                                string ProductMainSN_Temp = "";
                                                LogHelper.WriteLogMes($"询问mes成功");
                                                SendTaskMessage($"询问mes成功:{response}", MessageLevel.Debug);
                                                string[] item = response.Split('\n');
                                                //获取过度件sn
                                                string snItem = item.FirstOrDefault(f => f.Contains("sn="));
                                                if (snItem != null)
                                                {
                                                    ProductMainSN_Temp = snItem.Replace("sn=", "").Trim();
                                                    SendTaskMessage($"过度件sn：{ProductMainSN_Temp}", MessageLevel.Info);
                                                }

                                                LogHelper.WriteLogMes($"询问mes成功");
                                                SendTaskMessage($"询问mes成功:{response}", MessageLevel.Debug);

                                                //20260214,螺丝机特别版
                                                (bool isSuccess2, string response2) = await _mesService.StationGetAsync(ProductMainSN_Temp, "", 2);//询问mes
                                                if (isSuccess2)
                                                {
                                                    LogHelper.WriteLogMes($"询问mes成功");
                                                    SendTaskMessage($"询问mes成功:{response2}", MessageLevel.Debug);

                                                    item = response2.Split('\n');
                                                    snItem = item.FirstOrDefault(f => f.Contains("sn="));
                                                    if (snItem != null)
                                                    {
                                                        ProductMainSN[i] = snItem.Replace("sn=", "").Trim();
                                                        if (i == 0)
                                                        {
                                                            _productService.CurrentProductCode = ProductMainSN[i];
                                                        }
                                                        //_eventAggregator.GetEvent<DelaySaveImageNotification>().Publish(true);//通知界面延迟保存图片，等待MES查询结果返回，避免图片和数据不同步
                                                        SendTaskMessage($"产品主sn：{ProductMainSN[i]}", MessageLevel.Info);
                                                    }
                                                    string woItem = item.FirstOrDefault(f => f.Contains("wo="));
                                                    if (woItem != null)
                                                    {
                                                        wo[i] = woItem.Replace("wo=", "").Trim();
                                                        SendTaskMessage($"工单信息：{wo[i]}", MessageLevel.Info);
                                                    }
                                                    string modelItem = item.FirstOrDefault(f => f.Contains("model_num="));
                                                    if (modelItem != null)
                                                    {
                                                        model_num[i] = modelItem.Replace("model_num=", "").Trim();
                                                        SendTaskMessage($"model_num：{model_num[i]}", MessageLevel.Info);
                                                    }
                                                    string colorItem = item.FirstOrDefault(f => f.Contains("color="));
                                                    if (colorItem != null)
                                                    {
                                                        color[i] = colorItem.Replace("color=", "").Trim();
                                                        SendTaskMessage($"color：{color[i]}", MessageLevel.Info);
                                                    }
                                                    string ppidItem = item.FirstOrDefault(f => f.Contains("ppid="));
                                                    if (ppidItem != null)
                                                    {
                                                        ppid[i] = ppidItem.Replace("ppid=", "").Trim();
                                                        SendTaskMessage($"ppid：{ppid[i]}", MessageLevel.Info);
                                                    }
                                                    string revisionItem = item.FirstOrDefault(f => f.Contains("stage="));
                                                    if (revisionItem != null)
                                                    {
                                                        revision[i] = revisionItem.Replace("stage=", "").Trim();
                                                        SendTaskMessage($"stage：{revision[i]}", MessageLevel.Info);
                                                    }

                                                    LogHelper.WriteLogMes($"第二次询问mes成功");
                                                    SendTaskMessage($"第二次询问mes成功:{response2}", MessageLevel.Debug);

                                                    //切换产品
                                                    if (i == 0)//i=0时才会切换产品
                                                    {
                                                        var q = await _systemDatabaseService.QueryProductFromMesAsync(model_num[i], color[i]);
                                                        if (q != null && !string.IsNullOrEmpty(q.ProductName))
                                                        {
                                                            ProductList = new ObservableCollection<ProductModel>(_productService.GetAllProducts());
                                                            Guid productId = Guid.Empty;
                                                            foreach (var itt in ProductList)
                                                            {
                                                                if (itt.Name == q.ProductName)
                                                                {
                                                                    productId = itt.ID;
                                                                    break;
                                                                }
                                                            }
                                                            if (currentProduct.ID != productId)
                                                            {
                                                                //切换产品
                                                                 _productService.LoadProduct(productId);
                                                                _productService.SetCurrentProduct(productId);
                                                                await WriteParameterToPlcExAsync();
                                                                SendTaskMessage($"切换产品成功", MessageLevel.Debug);
                                                            }
                                                        }
                                                    }

                                                    //产品发生改变并且供料器发生了变化时，需要通知PLC进行取料更改
                                                    await plc.WriteNodeAsync(addressConfig.Out_ScrewFeederIsChanged.Address, (Int16)1); //不发生改变
                                                    await plc.WriteNodeAsync(string.Format(addressConfig.Out_MesStatus.Address, i), (Int16)1);

                                                }
                                                else
                                                {
                                                    LogHelper.WriteLogMes($"第二次询问mes失败");
                                                    SendTaskMessage($"第二次询问mes失败:{response2}", MessageLevel.Error);

                                                    //产品发生改变并且供料器发生了变化时，需要通知PLC进行取料更改
                                                    await plc.WriteNodeAsync(addressConfig.Out_ScrewFeederIsChanged.Address, (Int16)1); //不发生改变
                                                    await plc.WriteNodeAsync(string.Format(addressConfig.Out_MesStatus.Address, i), (Int16)3);
                                                }
                                            }
                                            else
                                            {
                                                LogHelper.WriteLogMes($"询问mes失败");
                                                SendTaskMessage($"询问mes失败:{response}", MessageLevel.Error);

                                                //产品发生改变并且供料器发生了变化时，需要通知PLC进行取料更改
                                                await plc.WriteNodeAsync(addressConfig.Out_ScrewFeederIsChanged.Address, (Int16)1); //不发生改变
                                                await plc.WriteNodeAsync(string.Format(addressConfig.Out_MesStatus.Address, i), (Int16)3);
                                            }
                                        }
                                        else //直接基于RFID询问是否过站
                                        {
                                            SendTaskMessage($"基于RFID询问是否过站", MessageLevel.Debug);
                                            (bool isSuccess, string response) = await _mesService.StationGetExAsync(code, "", 2);
                                            if (isSuccess)
                                            {
                                                string ProductMainSN_Temp = "";
                                                LogHelper.WriteLogMes($"询问mes成功");
                                                SendTaskMessage($"询问mes成功:{response}", MessageLevel.Debug);
                                                string[] item = response.Split('\n');
                                                //获取过度件sn
                                                string snItem = item.FirstOrDefault(f => f.Contains("sn="));
                                                if (snItem != null)
                                                {
                                                    ProductMainSN_Temp = snItem.Replace("sn=", "").Trim();
                                                    SendTaskMessage($"过度件sn：{ProductMainSN_Temp}", MessageLevel.Info);
                                                }

                                                LogHelper.WriteLogMes($"询问mes成功");
                                                SendTaskMessage($"询问mes成功:{response}", MessageLevel.Debug);

                                                (bool isSuccess2, string response2) = await _mesService.StationGetAsync(ProductMainSN_Temp, "", 2);//询问mes
                                                if (isSuccess2)
                                                {

                                                    item = response2.Split('\n');
                                                    snItem = item.FirstOrDefault(f => f.Contains("sn="));
                                                    if (snItem != null)
                                                    {
                                                        ProductMainSN[i] = snItem.Replace("sn=", "").Trim();
                                                        if (i == 0)
                                                        {
                                                            _productService.CurrentProductCode = ProductMainSN[i];
                                                        }
                                                        SendTaskMessage($"产品主sn：{ProductMainSN[i]}", MessageLevel.Info);
                                                    }
                                                    string woItem = item.FirstOrDefault(f => f.Contains("wo="));
                                                    if (woItem != null)
                                                    {
                                                        wo[i] = woItem.Replace("wo=", "").Trim();
                                                        SendTaskMessage($"工单信息：{wo[i]}", MessageLevel.Info);
                                                    }
                                                    string modelItem = item.FirstOrDefault(f => f.Contains("model_num="));
                                                    if (modelItem != null)
                                                    {
                                                        model_num[i] = modelItem.Replace("model_num=", "").Trim();
                                                        SendTaskMessage($"model_num：{model_num[i]}", MessageLevel.Info);
                                                    }
                                                    string colorItem = item.FirstOrDefault(f => f.Contains("color="));
                                                    if (colorItem != null)
                                                    {
                                                        color[i] = colorItem.Replace("color=", "").Trim();
                                                        SendTaskMessage($"color：{color[i]}", MessageLevel.Info);
                                                    }
                                                    string ppidItem = item.FirstOrDefault(f => f.Contains("ppid="));
                                                    if (ppidItem != null)
                                                    {
                                                        ppid[i] = ppidItem.Replace("ppid=", "").Trim();
                                                        SendTaskMessage($"ppid：{ppid[i]}", MessageLevel.Info);
                                                    }
                                                    string revisionItem = item.FirstOrDefault(f => f.Contains("stage="));
                                                    if (revisionItem != null)
                                                    {
                                                        revision[i] = revisionItem.Replace("stage=", "").Trim();
                                                        SendTaskMessage($"stage：{revision[i]}", MessageLevel.Info);
                                                    }

                                                    LogHelper.WriteLogMes($"第二次询问mes成功");
                                                    SendTaskMessage($"第二次询问mes成功:{response2}", MessageLevel.Debug);

                                                    //切换产品
                                                    if (i == 0)//i=0时才会切换产品
                                                    {
                                                        var q = await _systemDatabaseService.QueryProductFromMesAsync(model_num[i], color[i]);
                                                        if (q != null && !string.IsNullOrEmpty(q.ProductName))
                                                        {
                                                            ProductList = new ObservableCollection<ProductModel>(_productService.GetAllProducts());
                                                            Guid productId = Guid.Empty;
                                                            foreach (var itt in ProductList)
                                                            {
                                                                if (itt.Name == q.ProductName)
                                                                {
                                                                    productId = itt.ID;
                                                                    break;
                                                                }
                                                            }
                                                            if (currentProduct.ID != productId)
                                                            {
                                                                //切换产品
                                                                 _productService.LoadProduct(productId);
                                                                _productService.SetCurrentProduct(productId);
                                                                await WriteParameterToPlcExAsync();
                                                                SendTaskMessage($"切换产品成功", MessageLevel.Debug);
                                                            }
                                                        }
                                                    }

                                                    //产品发生改变并且供料器发生了变化时，需要通知PLC进行取料更改
                                                    await plc.WriteNodeAsync(addressConfig.Out_ScrewFeederIsChanged.Address, (Int16)1); //不发生改变
                                                    await plc.WriteNodeAsync(string.Format(addressConfig.Out_MesStatus.Address, i), (Int16)1);
                                                    return;
                                                }
                                                else
                                                {
                                                    LogHelper.WriteLogMes($"第二次询问mes失败");
                                                    SendTaskMessage($"第二次询问mes失败:{response2}", MessageLevel.Error);

                                                    //产品发生改变并且供料器发生了变化时，需要通知PLC进行取料更改
                                                    await plc.WriteNodeAsync(addressConfig.Out_ScrewFeederIsChanged.Address, (Int16)1); //不发生改变
                                                    if (models)
                                                    {
                                                        await plc.WriteNodeAsync(string.Format(addressConfig.Out_MesStatus.Address, i), (Int16)3);
                                                        SendTaskMessage($"发送plc信号3", MessageLevel.Debug);
                                                        return;
                                                    }
                                                    else
                                                    {
                                                        await plc.WriteNodeAsync(string.Format(addressConfig.Out_MesStatus.Address, i), (Int16)2);
                                                        SendTaskMessage($"发送plc信号2", MessageLevel.Debug);
                                                        return;
                                                    }
                                                }
                                            }
                                            else
                                            {
                                                LogHelper.WriteLogMes($"询问mes失败");
                                                SendTaskMessage($"询问mes失败:{response}", MessageLevel.Error);

                                                //产品发生改变并且供料器发生了变化时，需要通知PLC进行取料更改
                                                await plc.WriteNodeAsync(addressConfig.Out_ScrewFeederIsChanged.Address, (Int16)1); //不发生改变
                                                if (models)
                                                {
                                                    await plc.WriteNodeAsync(string.Format(addressConfig.Out_MesStatus.Address, i), (Int16)3);
                                                    SendTaskMessage($"发送plc信号3", MessageLevel.Debug);
                                                    return;
                                                }
                                                else
                                                {
                                                    await plc.WriteNodeAsync(string.Format(addressConfig.Out_MesStatus.Address, i), (Int16)2);
                                                    SendTaskMessage($"发送plc信号2", MessageLevel.Debug);
                                                    return;
                                                }
                                            }
                                        }
                                        LogHelper.WriteLogMes($"【mes结束QUERY】");
                                        SendTaskMessage($"mes结束QUERY", MessageLevel.Info);
                                    }
                                    else
                                    {
                                        ProductMainSN[i] = DateTime.Now.ToString("yyyyMMddHHmmssfff");
                                        if (i == 0)
                                        {
                                            _productService.CurrentProductCode = ProductMainSN[i];
                                        }

                                        LogHelper.WriteLogMes($"【未启用mes】");
                                        SendTaskMessage($"未启用mes", MessageLevel.Info);
                                        await plc.WriteNodeAsync(addressConfig.Out_ScrewFeederIsChanged.Address, (Int16)1); //不发生改变
                                        await plc.WriteNodeAsync(string.Format(addressConfig.Out_MesStatus.Address, i), (Int16)1);
                                        SendTaskMessage($"发送plc信号2", MessageLevel.Debug);
                                    }
                                }
                                // 上传本站数据
                                else if (state == 2)
                                {
                                    DFC.Clear();//CTQ数据集合
                                                // string productccode = ProductMainSN[i];
                                                //获取当前工位的配置
                                    var stationConfig = _configService.GetDeviceInfo(i);
                                    var sysConfig = _configService.GetSystemConfiguration();
                                    SendTaskMessage($"收到{i}:{stationConfig.DeviceName}上传本站数据请求...", MessageLevel.Debug);
                                    //从服务器中获取当前时间
                                    LogHelper.WriteLogMes($"【从服务器中获取当前时间】");
                                    SendTaskMessage($"从服务器中获取当前时间", MessageLevel.Info);
                                    var serverTimeResult = await _mesService.GetServerTimeAsync(i, ProductMainSN[i], 2);

                                    //这里缺少上传MES的本站数据结果及开始和结束时间，需要补充

                                    if (i == 0)
                                    {
                                        CTtime = serverTimeResult.Now.Subtract(_LastMesCheckTime[i]).TotalSeconds;
                                        _eventAggregator.GetEvent<DelaySaveImageNotification>().Publish(true);//通知界面延迟保存图片，等待MES查询结果返回，避免图片和数据不同步
                                    }

                                    //读取产品结果
                                    Int16 resultIndex = plc.ReadNode<Int16>(string.Format(addressConfig.In_Result.Address, i));

                                    if (stationConfig.EnableMES)
                                    {
                                        //目前只记录当前站
                                        if (i == 0)
                                            await _systemDatabaseService.RecordProductionAsync(new ProductionRecord()
                                            {
                                                ProductName = currentProduct.Name,
                                                ProductCode = ProductMainSN[i],
                                                DeviceId = i,
                                                DeviceName = "",
                                                Category = resultIndex == 1 ? "OK" : "NG",
                                                Quantity = 1,
                                                Remark = $"TotalSeconds:{serverTimeResult.Now.Subtract(_LastMesCheckTime[i]).TotalSeconds.ToString("F2")}",
                                            });
                                    }
                                      

                                    LogHelper.WriteLogMes($"【mes开始ADD】");
                                    SendTaskMessage($"mes开始ADD", MessageLevel.Info);

                                    if (i == 0)
                                    {
                                        foreach (var lockResult in lockResultsAll)
                                        {
                                            bool torqueRes, turnRes, pressureRes;
                                            if (lockResult.LockTorque >= lockResult.TargetTorqueLowerLimit && lockResult.LockTorque <= lockResult.TargetTorqueUpperLimit)
                                            {
                                                torqueRes = true;
                                            }
                                            else torqueRes = false;
                                            if (lockResult.Pressure >= stationConfig.DataInfo.CTQ_LSL_Pressure && lockResult.Pressure <= stationConfig.DataInfo.CTQ_USL_Pressure)
                                            {
                                                pressureRes = true;
                                            }
                                            else pressureRes = false;
                                            if (lockResult.LockTurns >= lockResult.TargetTurnsLowerLimit && lockResult.LockTurns <= lockResult.TargetTurnsUpperLimit)
                                            {
                                                turnRes = true;
                                            }
                                            else turnRes = false;

                                            string midValue = "NA", saveppid = "NA";
                                            if (stationConfig.SaveCsvPPID) saveppid = ppid[i];
                                            midValue = ((lockResult.TargetTorqueLowerLimit + lockResult.TargetTorqueUpperLimit) / 2).ToString("F3");
                                            DFC.Add(new DataFormCtq
                                            {
                                                PPID = saveppid,
                                                ScrewNum = lockResult.Number,
                                                PROCESS_NAME = stationConfig.DataInfo.PROCESS_NAME,
                                                PROCESS_START_TIME = _LastMesCheckTime[i].ToString("yyyy-MM-ddTHH:mm:ss") + "+08:00",
                                                CTQ_NAME = "Torque",
                                                CTQ_VALUE = lockResult.LockTorque,
                                                CTQ_LSL = lockResult.TargetTorqueLowerLimit,
                                                CTQ_USL = lockResult.TargetTorqueUpperLimit,
                                                PROCESS_END_TIME = serverTimeResult.Now.ToString("yyyy-MM-ddTHH:mm:ss") + "+08:00",
                                                SUPPLIER_NAME = stationConfig.DataInfo.SUPPLIER_NAME,
                                                COMMODITY_TYPE = stationConfig.DataInfo.COMMODITY_TYPE,
                                                REVISION = stationConfig.DataInfo.REVISION + "_" + revision[i],
                                                WO = wo[i],
                                                MFG_LOT = stationConfig.DataInfo.MFG_LOT,
                                                MFG_ASSY_LINE = stationConfig.DataInfo.MFG_ASSY_LINE,
                                                PROCESS_OUTCOME = torqueRes ? "PASS" : "FAIL",
                                                PROCESS_MACHINE_ID = stationConfig.DataInfo.PROCESS_MACHINE_ID,
                                                CTQ_UNIT_OF_MEASURE = "kgf.cm",
                                                ERROR_MESSAGE = torqueRes ? "NA" : "Torque_Spec OOS",
                                                PD_ATTR_01 = ProductMainSN[i],
                                                PD_ATTR_02 = midValue,
                                                PD_ATTR_03 = "NA",
                                                PD_ATTR_04 = productSn,
                                                PD_ATTR_05 = "NA",
                                            });
                                            midValue = ((lockResult.TargetTurnsLowerLimit + lockResult.TargetTurnsUpperLimit) / 2).ToString("F3");
                                            DFC.Add(new DataFormCtq
                                            {
                                                PPID = saveppid,
                                                ScrewNum = lockResult.Number,
                                                PROCESS_NAME = stationConfig.DataInfo.PROCESS_NAME,
                                                PROCESS_START_TIME = _LastMesCheckTime[i].ToString("yyyy-MM-ddTHH:mm:ss") + "+08:00",
                                                CTQ_NAME = "Turn",
                                                CTQ_VALUE = lockResult.LockTurns,
                                                CTQ_LSL = lockResult.TargetTurnsLowerLimit,
                                                CTQ_USL = lockResult.TargetTurnsUpperLimit,
                                                PROCESS_END_TIME = serverTimeResult.Now.ToString("yyyy-MM-ddTHH:mm:ss") + "+08:00",
                                                SUPPLIER_NAME = stationConfig.DataInfo.SUPPLIER_NAME,
                                                COMMODITY_TYPE = stationConfig.DataInfo.COMMODITY_TYPE,
                                                REVISION = stationConfig.DataInfo.REVISION + "_" + revision[i],
                                                WO = wo[i],
                                                MFG_LOT = stationConfig.DataInfo.MFG_LOT,
                                                MFG_ASSY_LINE = stationConfig.DataInfo.MFG_ASSY_LINE,
                                                PROCESS_OUTCOME = turnRes ? "PASS" : "FAIL",
                                                PROCESS_MACHINE_ID = stationConfig.DataInfo.PROCESS_MACHINE_ID,
                                                CTQ_UNIT_OF_MEASURE = "Turn",
                                                ERROR_MESSAGE = turnRes ? "NA" : "Turn_Spec OOS",
                                                PD_ATTR_01 = ProductMainSN[i],
                                                PD_ATTR_02 = midValue,
                                                PD_ATTR_03 = "NA",
                                                PD_ATTR_04 = productSn,
                                                PD_ATTR_05 = "NA",
                                            });
                                            midValue = ((stationConfig.DataInfo.CTQ_LSL_Pressure + stationConfig.DataInfo.CTQ_USL_Pressure) / 2).ToString("F3");
                                            DFC.Add(new DataFormCtq
                                            {
                                                PPID = saveppid,
                                                ScrewNum = lockResult.Number,
                                                PROCESS_NAME = stationConfig.DataInfo.PROCESS_NAME,
                                                PROCESS_START_TIME = _LastMesCheckTime[i].ToString("yyyy-MM-ddTHH:mm:ss") + "+08:00",
                                                CTQ_NAME = "Pressure",
                                                CTQ_VALUE = lockResult.Pressure,
                                                CTQ_LSL = stationConfig.DataInfo.CTQ_LSL_Pressure,
                                                CTQ_USL = stationConfig.DataInfo.CTQ_USL_Pressure,
                                                PROCESS_END_TIME = serverTimeResult.Now.ToString("yyyy-MM-ddTHH:mm:ss") + "+08:00",
                                                SUPPLIER_NAME = stationConfig.DataInfo.SUPPLIER_NAME,
                                                COMMODITY_TYPE = stationConfig.DataInfo.COMMODITY_TYPE,
                                                REVISION = stationConfig.DataInfo.REVISION + "_" + revision[i],
                                                WO = wo[i],
                                                MFG_LOT = stationConfig.DataInfo.MFG_LOT,
                                                MFG_ASSY_LINE = stationConfig.DataInfo.MFG_ASSY_LINE,
                                                PROCESS_OUTCOME = pressureRes ? "PASS" : "FAIL",
                                                PROCESS_MACHINE_ID = stationConfig.DataInfo.PROCESS_MACHINE_ID,
                                                CTQ_UNIT_OF_MEASURE = "kg",
                                                ERROR_MESSAGE = pressureRes ? "NA" : "Pressure_Spec OOS",
                                                PD_ATTR_01 = ProductMainSN[i],
                                                PD_ATTR_02 = midValue,
                                                PD_ATTR_03 = "NA",
                                                PD_ATTR_04 = productSn,
                                                PD_ATTR_05 = "NA",
                                            });
                                        }
                                        if (systemConfig.IsBasePartOpenLightKB)
                                        {
                                            string midValue = "999", saveppid = "NA";
                                            double upvlalue = 0, doenvlaue = 0;
                                            if (stationConfig.SaveCsvPPID) saveppid = ppid[i];
                                            bool pressureRes = true;
                                            foreach (var item in mes_cc)
                                            {
                                                switch (item.Key)
                                                {
                                                    case "1":
                                                        upvlalue = Convert.ToDouble(currentProduct.GlobalParamEx.CC1DownLimit.ToString("F3"));
                                                        doenvlaue = Convert.ToDouble(currentProduct.GlobalParamEx.CC1UpLimit.ToString("F3"));
                                                        midValue = ((currentProduct.GlobalParamEx.CC1DownLimit + currentProduct.GlobalParamEx.CC1UpLimit) / 2).ToString("F3");
                                                        if (Convert.ToDouble(item.Value) < upvlalue || Convert.ToDouble(item.Value) > doenvlaue)
                                                        {
                                                            resultToMes.Add($"CC{item.Key}_Fail");
                                                            SendTaskMessage($"CC{item.Key}:超限", MessageLevel.Error);
                                                        }
                                                        break;
                                                    case "2":
                                                        upvlalue = Convert.ToDouble(currentProduct.GlobalParamEx.CC2DownLimit.ToString("F3"));
                                                        doenvlaue = Convert.ToDouble(currentProduct.GlobalParamEx.CC2UpLimit.ToString("F3"));
                                                        midValue = ((currentProduct.GlobalParamEx.CC2DownLimit + currentProduct.GlobalParamEx.CC2UpLimit) / 2).ToString("F3");
                                                        if (Convert.ToDouble(item.Value) < upvlalue || Convert.ToDouble(item.Value) > doenvlaue)
                                                        {
                                                            resultToMes.Add($"CC{item.Key}_Fail");
                                                            SendTaskMessage($"CC{item.Key}:超限", MessageLevel.Error);
                                                        }
                                                        break;
                                                }
                                                dataToMes.Add($"CC{item.Key}", $"{item.Value}");
                                                DFC.Add(new DataFormCtq
                                                {
                                                    PPID = saveppid,
                                                    ScrewNum = 1,
                                                    PROCESS_NAME = stationConfig.DataInfo.PROCESS_NAME,
                                                    PROCESS_START_TIME = _LastMesCheckTime[i].ToString("yyyy-MM-ddTHH:mm:ss") + "+08:00",
                                                    CTQ_NAME = $"CC{item.Key}",
                                                    CTQ_VALUE = Convert.ToDouble(item.Value.ToString()),
                                                    CTQ_LSL = doenvlaue,
                                                    CTQ_USL = upvlalue,
                                                    PROCESS_END_TIME = serverTimeResult.Now.ToString("yyyy-MM-ddTHH:mm:ss") + "+08:00",
                                                    SUPPLIER_NAME = stationConfig.DataInfo.SUPPLIER_NAME,
                                                    COMMODITY_TYPE = stationConfig.DataInfo.COMMODITY_TYPE,
                                                    REVISION = stationConfig.DataInfo.REVISION + "_" + revision[i],
                                                    WO = wo[i],
                                                    MFG_LOT = stationConfig.DataInfo.MFG_LOT,
                                                    MFG_ASSY_LINE = stationConfig.DataInfo.MFG_ASSY_LINE,
                                                    PROCESS_OUTCOME = pressureRes ? "PASS" : "FAIL",
                                                    PROCESS_MACHINE_ID = stationConfig.DataInfo.PROCESS_MACHINE_ID,
                                                    CTQ_UNIT_OF_MEASURE = "mm",
                                                    ERROR_MESSAGE = pressureRes ? "NA" : $"CC{item.Key} OOS",
                                                    PD_ATTR_01 = ProductMainSN[i],
                                                    PD_ATTR_02 = midValue,
                                                    PD_ATTR_03 = "NA",
                                                    PD_ATTR_04 = productSn,
                                                    PD_ATTR_05 = "NA",
                                                });
                                            }
                                        }
                                    }
                                    //上传mes
                                    if (stationConfig.EnableMES)
                                    {

                                        //测试使用,强制上传mes为pass
                                        if (sysConfig.IsMesResult)
                                        {
                                            resultToMes.Clear();
                                        }

                                        (bool isSuccess, string response) = await _mesService.SubmitGetExAsync(ProductMainSN[i], "", dataToMes, resultToMes, _LastMesCheckTime[i], serverTimeResult.Now);
                                        if (isSuccess)
                                        {
                                            LogHelper.WriteLogMes($"上传mes成功");
                                            SendTaskMessage($"上传mes成功", MessageLevel.Debug);
                                        }
                                        else
                                        {
                                            LogHelper.WriteLogMes($"上传mes失败");
                                            SendTaskMessage($"上传mes失败", MessageLevel.Error);
                                        }
                                    }
                                    else
                                    {
                                        LogHelper.WriteLogMes($"上传mes成功");
                                        SendTaskMessage($"上传mes成功", MessageLevel.Debug);
                                    }
                                    await plc.WriteNodeAsync(string.Format(addressConfig.Out_MesStatus.Address, i), (Int16)3);

                                    if (stationConfig.SaveCsv)
                                    {
                                        if (!string.IsNullOrEmpty(stationConfig.SaveCsvPath))
                                        {
                                            bool recordResult = false;
                                            recordResult = RecordStationResult(i, DFC, ProductMainSN[i], serverTimeResult.Now.Subtract(_LastMesCheckTime[i]).TotalSeconds, _LastMesCheckTime[i], stationConfig.SaveCsvPath);
                                            if (recordResult)
                                            {
                                                SendTaskMessage($"{i}:{stationConfig.DeviceName}产品记录保存成功", MessageLevel.Debug);
                                                //上传数据
                                                try
                                                {
                                                    if (stationConfig.EnableMES)
                                                    {
                                                        DateTime dt = DateTime.Now;
                                                        string filename = $"{ProductMainSN[i]}_{dt.ToString("yyyyMMddHHmmss")}";
                                                        var device = _configService.GetDeviceInfo();
                                                        var config = _configService.GetSystemConfiguration();

                                                        (bool isSuc, string resp) = await _mesService.SendFtpFileAsync(ProductMainSN[i], filename);
                                                        if (isSuc)
                                                        {
                                                            LogHelper.WriteLogMes($"上传数据成功");
                                                            SendTaskMessage($"上传数据成功", MessageLevel.Debug);
                                                            string filePath = $"D:\\image\\Recored\\{dt.ToString("yyyy-MM")}\\{dt.ToString("MM-dd")}\\{currentProduct.Name}\\{ProductMainSN[i]}";
                                                            //string source_csv2 = $"{stationConfig.SaveCsvPath}\\{dt.ToString("yyyy-MM")}\\{i}_{stationConfig.DeviceName}_{dt.ToString("yyyy-MM-dd")}";
                                                            if (!Directory.Exists(filePath))
                                                            {
                                                                Directory.CreateDirectory(filePath);
                                                            }
                                                            string csvfilename = $"{i}_{stationConfig.DeviceName}_{dt.ToString("yyyy-MM-dd")}";
                                                            //复制csv
                                                            string source_csv = $"{stationConfig.SaveCsvPath}\\{dt.ToString("yyyy-MM")}\\{i}_{stationConfig.DeviceName}_{dt.ToString("yyyy-MM-dd")}.csv";
                                                            string target_csv = Path.Combine(filePath, Path.GetFileName(source_csv));
                                                            File.Copy(source_csv, target_csv, true);
                                                            //复制log
                                                            string source_log = $"..\\Log\\LogInfo\\{dt.ToString("yyyy-MM")}\\{dt.ToString("yyyy-MM-dd")}.txt";
                                                            string target_log = Path.Combine(filePath, Path.GetFileName(source_log));
                                                            File.Copy(source_log, target_log, true);

                                                            //判断是否保存锁付曲线
                                                            if (systemConfig.IsSaveScrewCurve)
                                                            {
                                                                string target_Directory = filePath + "\\扭力曲线\\";
                                                                string source_Torque_Image = config.ScrewCurvePath + $"\\{dt.ToString("yyyy-MM")}\\{dt.ToString("yyyy-MM-dd")}\\{currentProduct.Name}\\{ProductMainSN[i]}";
                                                                try
                                                                {
                                                                    var col = Directory.GetFiles(source_Torque_Image);
                                                                    Directory.CreateDirectory(target_Directory);
                                                                    foreach (var item in col)
                                                                    {
                                                                        string target_Torque = target_Directory + item.Replace(source_Torque_Image, "");
                                                                        File.Copy(item, target_Torque, true);
                                                                    }
                                                                }
                                                                catch (Exception)
                                                                {
                                                                    SendTaskMessage($"扭力曲线图读取失败", MessageLevel.Error);
                                                                }
                                                            }
                                                            CompressionImage(filePath, filename, device.Station, device.FixtureId);
                                                            //上传csv
                                                            bool isAfter20 = dt.Hour >= 20;
                                                            //判断是否是新的一天
                                                            bool isNewDay = dt.Date != _lastCompressDate.Date;
                                                            //当天还没执行过压缩
                                                            if (isAfter20 && isNewDay && !_hasCompressedToday)
                                                            {
                                                                // 执行压缩
                                                                CompressionSingleCsv(source_csv, csvfilename, device.Station, device.FixtureId);
                                                                _lastCompressDate = dt;
                                                                _hasCompressedToday = true;
                                                                LogHelper.WriteLogMes("csv上传数据成功");
                                                                SendTaskMessage($"csv上传数据成功", MessageLevel.Debug);
                                                            }
                                                            // 跨天后重置当天执行标记
                                                            if (!isNewDay && _hasCompressedToday)
                                                            {
                                                                _hasCompressedToday = false;
                                                            }

                                                        }
                                                        else
                                                        {
                                                            LogHelper.WriteLogMes($"上传数据失败");
                                                            SendTaskMessage($"上传数据失败", MessageLevel.Error);
                                                        }
                                                    }
                                                    else
                                                    {
                                                        LogHelper.WriteLogMes($"未启用mes");
                                                        SendTaskMessage($"未启用mes", MessageLevel.Error);
                                                    }
                                                }
                                                catch (Exception ex)
                                                {
                                                    SendTaskMessage($"上传数据时出错:{ex.Message}", MessageLevel.Error);
                                                    LogHelper.WriteLogError($"上传数据时出错", ex);
                                                }
                                            }
                                            else
                                            {
                                                SendTaskMessage($"{i}:{stationConfig.DeviceName}产品记录保存失败", MessageLevel.Error);
                                            }
                                        }
                                        else
                                        {
                                            SendTaskMessage($"{i}:{stationConfig.DeviceName}工位未配置保存路径，无法保存产品记录", MessageLevel.Error);
                                        }
                                    }
                                    else
                                    {
                                        SendTaskMessage($"{i}:{stationConfig.DeviceName}工位未配置保存产品记录", MessageLevel.Debug);
                                    }
                                    WriteProductLog(lockResultsAll, ProductMainSN[i], CTtime);
                                    mes_cc.Clear();
                                    LogHelper.WriteLogMes($"【mes结束ADD】");
                                    SendTaskMessage($"mes结束ADD", MessageLevel.Info);
                                }
                                //kb 螺丝站位询问mes 具体需求跟plc对接
                                else if (state == 5)
                                {

                                    SendTaskMessage($"收到KB Screw站点{i}过站检查请求（当站是否生产）...", MessageLevel.Debug);
                                    //获取过站时间
                                    _LastMesCheckTime[i] = (await _mesService.GetServerTimeAsync(i, code, 2)).Now;
                                    if (_configService.GetDeviceInfo().EnableMES)
                                    {
                                        LogHelper.WriteLogMes($"【mes开始QUERY】");
                                        SendTaskMessage($"mes开始QUERY", MessageLevel.Info);

                                        SendTaskMessage($"基于RFID询问是否过站", MessageLevel.Debug);
                                        (bool isSuccess, string response) = await _mesService.StationGetExAsync(code, "", 2);
                                        //如果成功的话就代表跟正常mes询问一样,当前站需工作
                                        if (isSuccess)
                                        {
                                            string ProductMainSN_Temp = "";
                                            LogHelper.WriteLogMes($"询问mes成功");
                                            SendTaskMessage($"询问mes成功:{response}", MessageLevel.Debug);
                                            string[] item = response.Split('\n');
                                            //获取过度件sn
                                            string snItem = item.FirstOrDefault(f => f.Contains("sn="));
                                            if (snItem != null)
                                            {
                                                ProductMainSN_Temp = snItem.Replace("sn=", "").Trim();
                                                SendTaskMessage($"过度件sn：{ProductMainSN_Temp}", MessageLevel.Info);
                                            }

                                            LogHelper.WriteLogMes($"询问mes成功");
                                            SendTaskMessage($"询问mes成功:{response}", MessageLevel.Debug);

                                            (bool isSuccess2, string response2) = await _mesService.StationGetAsync(ProductMainSN_Temp, "", 2);//询问mes
                                            if (isSuccess2)
                                            {

                                                item = response2.Split('\n');
                                                snItem = item.FirstOrDefault(f => f.Contains("sn="));
                                                if (snItem != null)
                                                {
                                                    ProductMainSN[i] = snItem.Replace("sn=", "").Trim();
                                                    if (i == 0)
                                                    {
                                                        _productService.CurrentProductCode = ProductMainSN[i];
                                                    }
                                                    SendTaskMessage($"产品主sn：{ProductMainSN[i]}", MessageLevel.Info);
                                                }
                                                string woItem = item.FirstOrDefault(f => f.Contains("wo="));
                                                if (woItem != null)
                                                {
                                                    wo[i] = woItem.Replace("wo=", "").Trim();
                                                    SendTaskMessage($"工单信息：{wo[i]}", MessageLevel.Info);
                                                }
                                                string modelItem = item.FirstOrDefault(f => f.Contains("model_num="));
                                                if (modelItem != null)
                                                {
                                                    model_num[i] = modelItem.Replace("model_num=", "").Trim();
                                                    SendTaskMessage($"model_num：{model_num[i]}", MessageLevel.Info);
                                                }
                                                string colorItem = item.FirstOrDefault(f => f.Contains("color="));
                                                if (colorItem != null)
                                                {
                                                    color[i] = colorItem.Replace("color=", "").Trim();
                                                    SendTaskMessage($"color：{color[i]}", MessageLevel.Info);
                                                }
                                                string ppidItem = item.FirstOrDefault(f => f.Contains("ppid="));
                                                if (ppidItem != null)
                                                {
                                                    ppid[i] = ppidItem.Replace("ppid=", "").Trim();
                                                    SendTaskMessage($"ppid：{ppid[i]}", MessageLevel.Info);
                                                }
                                                string revisionItem = item.FirstOrDefault(f => f.Contains("stage="));
                                                if (revisionItem != null)
                                                {
                                                    revision[i] = revisionItem.Replace("stage=", "").Trim();
                                                    SendTaskMessage($"stage：{revision[i]}", MessageLevel.Info);
                                                }

                                                LogHelper.WriteLogMes($"第二次询问mes成功");
                                                SendTaskMessage($"第二次询问mes成功:{response2}", MessageLevel.Debug);

                                                //切换产品
                                                if (i == 0)//i=0时才会切换产品
                                                {
                                                    var q = await _systemDatabaseService.QueryProductFromMesAsync(model_num[i], color[i]);
                                                    if (q != null && !string.IsNullOrEmpty(q.ProductName))
                                                    {
                                                        ProductList = new ObservableCollection<ProductModel>(_productService.GetAllProducts());
                                                        Guid productId = Guid.Empty;
                                                        foreach (var itt in ProductList)
                                                        {
                                                            if (itt.Name == q.ProductName)
                                                            {
                                                                productId = itt.ID;
                                                                break;
                                                            }
                                                        }
                                                        if (currentProduct.ID != productId)
                                                        {
                                                            //切换产品
                                                            await _productService.LoadProductAsync(productId);
                                                            _productService.SetCurrentProduct(productId);
                                                            await WriteParameterToPlcExAsync();
                                                            SendTaskMessage($"切换产品成功", MessageLevel.Debug);
                                                        }
                                                    }
                                                }

                                                //产品发生改变并且供料器发生了变化时，需要通知PLC进行取料更改
                                                await plc.WriteNodeAsync(addressConfig.Out_ScrewFeederIsChanged.Address, (Int16)1); //不发生改变
                                                await plc.WriteNodeAsync(string.Format(addressConfig.Out_MesStatus.Address, i), (Int16)1);

                                            }
                                            else
                                            {
                                                LogHelper.WriteLogMes($"第二次询问mes失败");
                                                SendTaskMessage($"第二次询问mes失败:{response2}", MessageLevel.Error);

                                                //产品发生改变并且供料器发生了变化时，需要通知PLC进行取料更改
                                                await plc.WriteNodeAsync(addressConfig.Out_ScrewFeederIsChanged.Address, (Int16)1); //不发生改变
                                                if (models)
                                                {
                                                    await plc.WriteNodeAsync(string.Format(addressConfig.Out_MesStatus.Address, i), (Int16)3);
                                                }
                                                else
                                                {
                                                    await plc.WriteNodeAsync(string.Format(addressConfig.Out_MesStatus.Address, i), (Int16)2);
                                                }
                                            }
                                        }
                                        else
                                        {
                                            LogHelper.WriteLogMes($"询问mes失败");
                                            SendTaskMessage($"询问mes失败:{response}", MessageLevel.Error);

                                            //产品发生改变并且供料器发生了变化时，需要通知PLC进行取料更改
                                            await plc.WriteNodeAsync(addressConfig.Out_ScrewFeederIsChanged.Address, (Int16)1); //不发生改变

                                            //表示前面的kb screw站点已经打完螺丝并且过站成功到3d aoi,根据plc的需求直接放行
                                            if (response.Contains("3D AOI"))
                                            {
                                                await plc.WriteNodeAsync(string.Format(addressConfig.Out_MesStatus.Address, i), (Int16)2);
                                                return;
                                            }
                                            //表示kb组装 站点ng  具体写入型号跟plc对接
                                            else if (response.Contains("C_KB_Link"))
                                            {
                                                await plc.WriteNodeAsync(string.Format(addressConfig.Out_MesStatus.Address, i), (Int16)5);
                                                return;
                                            }
                                            // 后面还有一些判断条件也需跟当前AE对接
                                            await plc.WriteNodeAsync(string.Format(addressConfig.Out_MesStatus.Address, i), (Int16)2);
                                        }

                                        LogHelper.WriteLogMes($"【mes结束QUERY】");
                                        SendTaskMessage($"mes结束QUERY", MessageLevel.Info);
                                    }
                                    else
                                    {
                                        ProductMainSN[i] = DateTime.Now.ToString("yyyyMMddHHmmssfff");
                                        if (i == 0)
                                        {
                                            _productService.CurrentProductCode = ProductMainSN[i];
                                        }

                                        LogHelper.WriteLogMes($"【未启用mes】");
                                        SendTaskMessage($"未启用mes", MessageLevel.Info);
                                        await plc.WriteNodeAsync(addressConfig.Out_ScrewFeederIsChanged.Address, (Int16)1); //不发生改变
                                        await plc.WriteNodeAsync(string.Format(addressConfig.Out_MesStatus.Address, i), (Int16)1);
                                    }
                                }
                                else
                                {
                                    SendTaskMessage($"{i}过站检查信号：state={state}，处理为默认状态", MessageLevel.Alarm);
                                    await plc.WriteNodeAsync(string.Format(addressConfig.Out_MesStatus.Address, i), (Int16)0);
                                    return;
                                }
                               // _LastMesCheck[i] = 0;
                            }
                        }
                    }

                }
            }
            catch (Exception ex)
            {
                SendTaskMessage(ex.Message, MessageLevel.Error);
            }
        }

        #endregion

        #region 方法

        public void SendTaskMessage(string msg, MessageLevel level)
        {
            App.Current.Dispatcher.Invoke(() =>
            {
                _eventAggregator.GetEvent<TaskMessageNotification>().Publish(new Models.MessageStruct() { Message = msg, level = level });
            });
        }

        #region 界面状态显示

        // 新增字段
        private readonly object _runStatusLock = new object();

        private RunDisplayMode _lastRunDisplayMode = RunDisplayMode.Unknown;

        /// <summary>
        /// 刷新当前运行状态
        /// </summary>
        public void CurrentRunStatus()
        {
            lock (_runStatusLock)
            {
                RunDisplayMode mode;

                try
                {
                    mode = EvaluateRunDisplayMode();
                }
                catch (Exception ex)
                {
                    LogHelper.WriteLogError("刷新运行状态时出错", ex);
                    mode = RunDisplayMode.Manual;
                }

                ApplyRunDisplayMode(mode);
            }
        }

        /// <summary>
        /// 计算当前应该显示的模式
        /// </summary>
        private RunDisplayMode EvaluateRunDisplayMode()
        {
            // 1. 流线模式优先
            if (_LastClearMode)
            {
                return RunDisplayMode.Clear;
            }

            // 2. 调机模式次优先
            if (_LastManualMode)
            {
                return RunDisplayMode.Manual;
            }

            // 3. 没进自动运行，默认按调机显示
            if (!_LastAutoRunning)
            {
                return RunDisplayMode.Manual;
            }

            // 4. 自动运行时，再检查前置条件
            bool connectStatus = IsAllDeviceConnected();
            bool mesStatus = IsMesReady();
            bool paraStatus = IsParameterReady();

            var curUser = _systemDatabaseService.GetCurrentUser();

            if (connectStatus && mesStatus && paraStatus && curUser.userPart == UserPart.Operator)
            {
                return RunDisplayMode.Auto;
            }

            return RunDisplayMode.Manual;
        }

        /// <summary>
        /// 所有设备是否连接正常
        /// </summary>
        private bool IsAllDeviceConnected()
        {
            List<StatusInfo> statusSnapshot = null;

            App.Current.Dispatcher.Invoke(() =>
            {
                statusSnapshot = Status?.ToList() ?? new List<StatusInfo>();
            });

            if (statusSnapshot.Count == 0)
            {
                return false;
            }

            foreach (var item in statusSnapshot)
            {
                // 注意：这里不要直接 item.Background == Brushes.Red
                if (item?.Background is SolidColorBrush brush)
                {
                    bool res = true;
                    App.Current.Dispatcher.Invoke(() =>
                    {
                        if (brush.Color == Colors.Red)
                        {
                            SendTaskMessage("当前设备存在连接失败，请检查..." + item.Message, MessageLevel.Error);
                            res = false;
                        }
                    });
                    if (!res)
                    {
                        return false;
                    }
                }
            }

            return true;
        }

        /// <summary>
        /// MES相关配置是否满足
        /// </summary>
        private bool IsMesReady()
        {
            var allDevices = _configService.GetAllDeviceInfos();

            for (int i = 0; i < ((allDevices.Count >= 8) ? 2 : 1); i++)
            {
                var stationConfig = allDevices.FirstOrDefault(d => d.DeviceNo == (i == 0 ? 0 : 7));

                if (stationConfig == null)
                {
                    SendTaskMessage("当前MES未配置，请检查...", MessageLevel.Error);
                    return false;
                }
                if (string.IsNullOrEmpty(stationConfig.SaveCsvPath) && i == 0)
                {
                    SendTaskMessage("当前CSV路径为空，请检查...", MessageLevel.Error);
                    return false;
                }

                if (!stationConfig.EnableMES || !stationConfig.SaveCsv)
                {
                    SendTaskMessage("当前未启用MES或未启用CSV保存，请检查...", MessageLevel.Error);
                    return false;
                }
            }
            return true;
        }

        /// <summary>
        /// 参数相关配置是否满足
        /// </summary>
        private bool IsParameterReady()
        {
            var systemConfig = _configService.GetSystemConfiguration();
            if (systemConfig == null)
            {
                SendTaskMessage("当前无系统文件，请检查...", MessageLevel.Error);
                return false;
            }

            if (!systemConfig.IsSaveScrewCurve)
            {
                SendTaskMessage("当前保存扭力曲线未勾选，请检查...", MessageLevel.Error);
                return false;
            }
            if (string.IsNullOrEmpty(systemConfig.ScrewCurvePath))
            {
                SendTaskMessage("当前保存扭力曲线为空，请检查...", MessageLevel.Error);
                return false;
            }
            return true;

        }

        /// <summary>
        /// 应用显示模式到UI
        /// </summary>
        private void ApplyRunDisplayMode(RunDisplayMode mode)
        {
            // 模式没变化就不重复刷UI，也不重复打日志
            if (_lastRunDisplayMode == mode)
            {
                return;
            }

            _lastRunDisplayMode = mode;

            App.Current.Dispatcher.Invoke(() =>
            {
                switch (mode)
                {
                    case RunDisplayMode.Auto:
                        CurrentDisplayMode = mode;
                        SendTaskMessage("当前为运行模式", MessageLevel.Debug);
                        break;

                    case RunDisplayMode.Clear:
                        CurrentDisplayMode = mode;
                        SendTaskMessage("当前为流线模式", MessageLevel.Info);
                        break;

                    case RunDisplayMode.Manual:
                    default:
                        CurrentDisplayMode = mode;
                        SendTaskMessage("当前为调机模式", MessageLevel.Info);
                        break;
                }
            });
        }

        #endregion

        #region 压力采集

        private float _maxPressure = float.MinValue;

        /// <summary>
        /// 开始采集压力值
        /// </summary>
        /// <param name="productName">配方名称</param>
        /// <param name="productCode">产品编号</param>
        /// <param name="positionIndex">锁付点编号</param>
        private void StartPressureCollection(string productName, string productCode, int positionIndex)
        {

            try
            {
                // cancel existing if any
                //_pressureCts?.Cancel();
                //_pressureTimeoutCts?.Cancel();
                //_pressureLinkedCts?.Dispose();
                //_pressureSamples?.Clear();
                //_pressureTimeoutCts[positionIndex]?.Cancel();
                _pressureSamples?.Clear();

                _pressureCts[positionIndex] = new CancellationTokenSource();
                _pressureTimeoutCts[positionIndex] = new CancellationTokenSource();

                //_pressureCts = new CancellationTokenSource();
                //_pressureTimeoutCts = new CancellationTokenSource();

                // timeout after configured seconds
                _pressureTimeoutCts[positionIndex].CancelAfter(TimeSpan.FromSeconds(_pressureMaxDurationSeconds));

                // link tokens so either stop or timeout cancels
                _pressureLinkedCts[positionIndex] = CancellationTokenSource.CreateLinkedTokenSource(_pressureCts[positionIndex].Token, _pressureTimeoutCts[positionIndex].Token);

                var token = _pressureLinkedCts[positionIndex].Token;
                var addressConfig = _configService.GetPlcAddresses();
                var plc = _plcService.GetPlcByNumber(addressConfig.PlcNo) as OpcUaClientPLC;
                if (plc == null || !plc.IsConnected) return;
                Task.Run(async () =>
                {

                    SendTaskMessage($"Pressure collection started for position {positionIndex}", MessageLevel.Debug);
                    while (!token.IsCancellationRequested)
                    {
                        try
                        {
                            float pressure = plc.ReadNode<float>(addressConfig.In_PressureValue.Address);
                            lock (_pressureSamples)
                            {
                                //SendTaskMessage($"压力采集时出错:{pressure}", MessageLevel.Info);
                                _pressureSamples.Add((DateTime.Now, pressure));
                                if (pressure > _maxPressure)
                                {
                                    _maxPressure = pressure;
                                }

                            }
                        }
                        catch (Exception ex)
                        {
                            LogHelper.WriteLogError("采集压力值时出错", ex);
                        }
                        await Task.Delay(_pressureSampleIntervalMs);
                    }
                    SendTaskMessage($"Pressure {_pressureSamples}", MessageLevel.Debug);
                    // if cancelled due to timeout
                    //if (_pressureTimeoutCts[positionIndex].IsCancellationRequested && !_pressureCts[positionIndex].IsCancellationRequested)
                    //{
                    //    SendTaskMessage("Pressure collection timed out, saving collected data.", MessageLevel.Alarm);
                    //    await StopAndSavePressureCollectionAsync(productName, productCode, positionIndex);
                    //}
                }, token);
            }
            catch (Exception ex)
            {
                LogHelper.WriteLogError("StartPressureCollection error", ex);
                SendTaskMessage($"压力采集时出错:{ex.Message}", MessageLevel.Error);
            }
        }

        /// <summary>
        /// 停止采集并保存压力数据
        /// </summary>
        /// <param name="productName"></param>
        /// <param name="productCode"></param>
        /// <param name="positionIndex"></param>
        /// <returns></returns>
        private async Task StopAndSavePressureCollectionAsync(string productName, string productCode, int positionIndex)
        {
            try
            {
                // 获取当前产品
                var currentProduct = _productService.GetCurrentProduct();
                if (currentProduct == null)
                {
                    return;
                }

                // cancel sampling
                //_pressureCts?.Cancel();
                // allow worker to observe cancel
                //await Task.Delay(50);

                List<(DateTime Timestamp, float Value)> snapshot;
                lock (_pressureSamples)
                {
                    snapshot = new List<(DateTime, float)>(_pressureSamples);
                }

                if (snapshot.Count == 0)
                {
                    SendTaskMessage("No pressure samples collected.", MessageLevel.Info);
                    return;
                }

                // save to file under configured path
                try
                {
                    //获取系统参数
                    var systemConfig = _configService.GetSystemConfiguration();

                    string datePath = DateTime.Now.ToString("yyyy-MM") + "\\" + DateTime.Now.ToString("yyyy-MM-dd") + "\\";
                    string dirPath = System.IO.Path.Combine(systemConfig.ScrewCurvePath, datePath, currentProduct.Name, positionIndex.ToString());
                    if (!Directory.Exists(dirPath))
                    {
                        Directory.CreateDirectory(dirPath);
                    }
                    string fileName = $"pressure-{productCode}-{positionIndex}-{DateTime.Now.ToString("HHmmss")}.csv";
                    string fullPath = Path.Combine(dirPath, fileName);
                    string pngfileName = $"pressure-{productCode}-{positionIndex}-{DateTime.Now.ToString("HHmmss")}.png";
                    string pngPath = Path.Combine(dirPath, pngfileName);
                    if (!systemConfig.IsSaveScrewCurve)
                    {
                        fullPath = string.Empty;
                        pngPath = string.Empty;
                    }
                    App.Current.Dispatcher.Invoke(() =>
                    {
                        _eventAggregator.GetEvent<PressureFinishNotification>().Publish((true, snapshot.ToArray(), pngPath));
                    });

                    //判断是否保存锁付曲线
                    if (systemConfig.IsSaveScrewCurve)
                    {
                        if (!string.IsNullOrEmpty(fullPath))
                        {
                            var sb = new StringBuilder();
                            sb.AppendLine("Timestamp,Value");
                            foreach (var s in snapshot)
                            {
                                sb.AppendLine($"{s.Timestamp:O},{s.Value}");
                            }

                            File.WriteAllText(fullPath, sb.ToString());
                            SendTaskMessage($"Pressure samples saved to {fullPath}", MessageLevel.Debug);
                        }
                    }

                    //var sb = new StringBuilder();
                    //sb.AppendLine("Timestamp,Value");
                    //foreach (var s in snapshot)
                    //{
                    //    sb.AppendLine($"{s.Timestamp:O},{s.Value}");
                    //}

                    //File.WriteAllText(fullPath, sb.ToString());
                    // SendTaskMessage($"Pressure samples saved to {fullPath}", MessageLevel.Debug);
                }
                catch (Exception ex)
                {
                    LogHelper.WriteLogError("保存压力采样文件时出错", ex);
                    SendTaskMessage("保存压力采样文件时出错: " + ex.Message, MessageLevel.Error);
                }
            }
            catch (Exception ex)
            {
                LogHelper.WriteLogError("StopAndSavePressureCollectionAsync error", ex);
            }
            finally
            {
                try
                {
                    _pressureLinkedCts[positionIndex]?.Cancel();
                    _pressureLinkedCts[positionIndex]?.Dispose();
                    _pressureTimeoutCts[positionIndex]?.Dispose();
                    _pressureCts[positionIndex]?.Dispose();
                    _pressureSamples?.Clear();
                    //_maxPressure = 0;
                }
                catch { }
            }
        }
        #endregion

        #region 产品记录

        private async void DoYieldTime(object state)
        {
            try
            {
                //获取当前产品
                var currentproduct = _productService.GetCurrentProduct();
                if (currentproduct == null) return;
                TotalQuantity = await _systemDatabaseService.GetOverallProductionAsync(currentproduct.Name);
                //TotalQuantityToday = await _systemDatabaseService.GetTodayProductionAsync(currentproduct.Name);
                //CurrentUPH = await _systemDatabaseService.GetLastHourProductionAsync(currentproduct.Name);
                ////
                ThrowNumber = await _systemDatabaseService.GetThrowNumberAsync();
                //NgNumber = await _systemDatabaseService.GetNGProductionAsync(currentproduct.Name);
                //Yield = ((double)TotalQuantityToday - (double)NgNumber) / (double)TotalQuantityToday * 100;

                TotalQuantityToday = 0;
                CurrentUPH = 0;
                NgNumber = 0;
                Yield = 0;
                ObservableCollection<ProductModel> ProductList = new ObservableCollection<ProductModel>(_productService.GetAllProducts());
                foreach (var product in ProductList)
                {
                    //TotalQuantity += await _systemDatabaseService.GetOverallProductionAsync(product.Name);
                    TotalQuantityToday += await _systemDatabaseService.GetTodayProductionAsync(product.Name);
                    CurrentUPH += await _systemDatabaseService.GetLastHourProductionAsync(product.Name);
                    NgNumber += await _systemDatabaseService.GetNGProductionAsync(product.Name);
                    Yield += ((double)TotalQuantityToday - (double)NgNumber) / (double)TotalQuantityToday * 100;
                }
            }
            catch (Exception)
            {

            }
        }

        #endregion

        #region 字符判定

        /// <summary>
        /// 判断是否符合当站
        /// </summary>
        /// <param name="data"></param>
        /// <param name="checkData"></param>
        /// <returns></returns>
        private bool CheckCode(string data, string checkData)
        {
            try
            {
                if (data.Length != checkData.Length)
                {
                    var len = checkData.Length - data.Length;
                    LogHelper.WriteLogMes($"判断是否符合当站失败，字符长度差{len}");
                    SendTaskMessage($"判断是否符合当站失败，字符长度差{len}", MessageLevel.Error);
                    return false;
                }

                int count = checkData.Length;
                for (int i = 0; i < count; i++)
                {
                    if (checkData[i] == '*')//不需要检测的部分
                    {
                        continue;
                    }

                    if (data[i] != checkData[i])//有值不一致
                    {
                        LogHelper.WriteLogMes($"判断是否符合当站失败，第{i}个字符，不一致");
                        SendTaskMessage($"判断是否符合当站失败，第{i}个字符，不一致", MessageLevel.Error);
                        return false;
                    }
                }

                return true;
            }
            catch (Exception ex)
            {
                LogHelper.WriteLogMes($"判断是否符合当站失败，{ex}");
                SendTaskMessage($"判断是否符合当站失败，{ex}", MessageLevel.Error);
                return false;
            }

        }

        #endregion

        #region vm启动检测

        /// <summary>
        /// 杀死所有VM有关进程
        /// </summary>
        public void KillVMProcess()
        {
            KillProcess("VisionMasterServerApp");
            KillProcess("VisionMaster");
            KillProcess("VmModuleProxy.exe");
            KillProcess("vServerApp.exe");
        }

        /// <summary>
        /// 杀死指定进程名的进程
        /// </summary>
        /// <param name="strKillName"></param>
        public void KillProcess(string strKillName)
        {
            foreach (System.Diagnostics.Process p in System.Diagnostics.Process.GetProcesses())
            {
                if (p.ProcessName.Contains(strKillName))
                {
                    try
                    {
                        p.Kill();
                        p.WaitForExit();
                    }
                    catch (Exception ex)
                    {
                        LogHelper.WriteLogError(string.Format(Lang.杀死进程0时失败, strKillName), ex);
                    }
                }
            }
        }
        #endregion

        #region 拍螺丝数据保存csv
        /// <summary>
        /// 通用方法：将存储XYU的字典导出为规范CSV文件
        /// </summary>
        /// <param name="dataDict">存储XYU的字典</param>
        /// <param name="savePath">CSV文件保存路径</param>
        /// <param name="appendMode">是否追加模式（true=每次运行新增一行，false=覆盖原有文件）</param>
        /// <param name="decimalPlaces">数值保留的小数位数（默认4位，适配工业视觉精度）</param>
        static void ExportDictionaryToCsv(Dictionary<string, double> dataDict, string savePath, bool appendMode = false, int decimalPlaces = 4)
        {
            // 自动创建目录（避免路径不存在报错）
            string directory = Path.GetDirectoryName(savePath);
            if (!Directory.Exists(directory))
            {
                Directory.CreateDirectory(directory);
            }

            // 构建CSV内容
            StringBuilder csvContent = new StringBuilder();

            // 处理表头：仅当文件不存在/非追加模式时，才写入表头
            if (!appendMode || !File.Exists(savePath))
            {
                csvContent.AppendLine(string.Join(",", dataDict.Keys));
            }

            // 处理数据行：按指定小数位数格式化数值
            List<string> formattedValues = new List<string>();
            foreach (var value in dataDict.Values)
            {
                formattedValues.Add(Math.Round(value, decimalPlaces).ToString());
            }
            csvContent.AppendLine(string.Join(",", formattedValues));

            // 写入文件：UTF-8带BOM编码，Excel打开无乱码
            if (appendMode)
            {
                // 追加模式：在文件末尾新增内容
                File.AppendAllText(savePath, csvContent.ToString(), Encoding.UTF8);
            }
            else
            {
                // 覆盖模式：新建/替换文件
                File.WriteAllText(savePath, csvContent.ToString(), Encoding.UTF8);
            }
        }

        public bool ExportDictionaryToCsv1(string rfid, double x, double y, double u)
        {
            try
            {
                DateTime dt = DateTime.Now;
                if (rfid == null || rfid.Count() == 0)
                {
                    rfid = dt.ToString("MM-dd-mm");
                }
                string path = $"D:\\视觉检测数据XYU数据\\{dt.ToString("yyyy-MM")}\\{dt.ToString("yyyy-MM-dd")}\\{rfid}.csv";
                StringBuilder sb = new StringBuilder();
                sb.AppendLine($"SN,X,Y,U");
                sb.AppendLine();
                sb.AppendLine($"{rfid},{x},{y},{u}");
                sb.AppendLine();
                if (!Directory.Exists(Path.GetDirectoryName(path)))   //判断文件夹是否
                {
                    Directory.CreateDirectory(Path.GetDirectoryName(path));    //创建文件夹
                }
                if (File.Exists(path))
                {
                    // 使用 StreamWriter 以追加模式打开文件
                    StreamWriter sw = new StreamWriter(path, true, Encoding.UTF8);
                    sw.WriteLine(sb.ToString().TrimEnd(','));
                    //sw.WriteLine(sb1.ToString().TrimEnd(','));
                    sw.Close();
                    sw.Dispose();
                }
                else
                {
                    StreamWriter sw = new StreamWriter(path, true, Encoding.UTF8);
                    sw.WriteLine(sb.ToString().TrimEnd(','));
                    sw.Close();
                    sw.Dispose();
                }
                return true;
            }
            catch (Exception ex)
            {
                LogHelper.WriteLogError("写入产品记录时出错!", ex);
                return false;
            }
        }
        #endregion
        #region 产品锁付记录进行存储
        /// <summary>
        /// 产品锁付记录进行存储
        /// </summary>
        /// <param name="result">结果</param>
        public void WriteProductLog(List<LockResult> lockResults, string rfid, double ct)
        {
            try
            {
                string result = "";//产品的总结果
                foreach (var item in lockResults)
                {
                    result = "OK";
                    if (!item.LockPassed)
                    {
                        result = "NG";
                        break;
                    }
                }
                DateTime dt = DateTime.Now;
                int number = lockResults.Count;//螺丝数量
                string path = $"D:\\Data\\生产数据\\{dt.ToString("yyyy-MM")}\\{dt.ToString("yyyy-MM-dd")}.csv";
                StringBuilder sb = new StringBuilder();
                //具体的ct需要优化
                sb.Append($"{dt.ToString("yyyy-MM-dd HH:mm:ss")},{lockResults[0].ProductName},{Math.Round(ct, 3)},{rfid},{result},{lockResults[number - 1].NozzleNumber},{lockResults[number - 1].HeadNumber},");
                foreach (var item in lockResults)
                {
                    try
                    {
                        string res = "";
                        if (item.LockPassed)
                        {
                            res = "Pass";
                        }
                        else res = "Fail";
                        sb.Append($"{res},{item.ResultDetails},{item.LockTorque},{item.TargetTorqueUpperLimit},{item.TargetTorqueLowerLimit},{item.LockTurns},{item.TargetTurnsUpperLimit},{item.TargetTurnsLowerLimit},{item.Pressure},{item.PositionX},{item.PositionY},{item.StartPositionZ},{item.EndPositionZ},{item.LockDescentSpeed},");
                    }
                    catch (Exception)
                    {
                        sb.Append($",,,,,,,,,,,,,,");
                    }
                }
                //========================
                if (!Directory.Exists(Path.GetDirectoryName(path)))   //判断文件夹是否
                {
                    Directory.CreateDirectory(Path.GetDirectoryName(path));    //创建文件夹
                }

                if (File.Exists(path))
                {
                    // 使用 StreamWriter 以追加模式打开文件
                    StreamWriter sw = new StreamWriter(path, true, Encoding.UTF8);
                    sw.WriteLine(sb.ToString().TrimEnd(','));
                    sw.Close();
                    sw.Dispose();
                }
                else
                {
                    StreamWriter sw = new StreamWriter(path, true, Encoding.UTF8);
                    StringBuilder sb1 = new StringBuilder();
                    StringBuilder sb_up = new StringBuilder();
                    StringBuilder sb_down = new StringBuilder();
                    sb1.Append("时间,产品名称,CT,RFID,产品结果,吸嘴数量,披头数量,");
                    for (int i = 0; i < number; i++)
                    {
                        sb1.Append($"螺丝{i + 1}结果,螺丝{i + 1}结果详情,螺丝{i + 1}扭矩,螺丝{i + 1}扭矩上限,螺丝{i + 1}扭矩下限,螺丝{i + 1}圈数,螺丝{i + 1}圈数上限,螺丝{i + 1}圈数下限,螺丝{i + 1}压力值,螺丝{i + 1}锁附X,螺丝{i + 1}锁附Y,螺丝{i + 1}开始位置Z,螺丝{i + 1}结束位置Z,螺丝{i + 1}锁附下降速度,");
                    }
                    sw.WriteLine(sb1.ToString().TrimEnd(','));
                    sw.WriteLine(sb.ToString().TrimEnd(','));
                    sw.Close();
                    sw.Dispose();
                }
            }
            catch (Exception ex)
            {
                LogHelper.WriteLogError("写入产品记录时出错!", ex);
            }

            lockResultsAll.Clear();
        }

        /// <summary>
        /// 记录当前工位的锁付结果
        /// </summary>
        /// <param name="stationIndex"></param>
        /// <param name="lockResults"></param>
        /// <param name="productMainSN"></param>
        /// <param name="ct"></param>
        /// <param name="timestamp"></param>
        /// <param name="savePath"></param>
        /// <param name="isSingleLine">是否将所有螺丝的锁付结果一行显示，还是每颗螺丝单独一行显示，默认所有颗螺丝单独一行显示</param>
        /// <returns></returns>
        private bool RecordLockResult(int stationIndex, List<LockResult> lockResults, string productMainSN, double ct, DateTime timestamp, string savePath, bool isSingleLine = true, bool isFirstEnter = true)
        {
            try
            {
                //获取当前工位的配置
                var stationConfig = _configService.GetDeviceInfo(stationIndex);
                if (stationConfig == null) return false;
                //如果保存路径为空，则不保存
                if (string.IsNullOrEmpty(savePath)) return false;
                //如果锁付结果列表为空，则不保存
                if (lockResults == null || lockResults.Count == 0) return false;
                string fullPath = savePath;
                //如果保存路径是一个文件路径，则直接保存，否则按照工位和日期进行保存
                if (File.Exists(savePath) || Path.HasExtension(savePath))
                {
                    fullPath = savePath;
                    //如果路径不存在，则创建
                    // 创建目录
                    string directory = Path.GetDirectoryName(fullPath);
                    if (!string.IsNullOrEmpty(directory) && !Directory.Exists(directory))
                    {
                        Directory.CreateDirectory(directory);
                    }
                }
                else
                {
                    //锁付结果保存至CSV文件，文件名格式：savePath\yyyy-MM\工位编号_工位名称_yyyy-MM-dd.csv
                    string datePath = timestamp.ToString("yyyy-MM") + "\\";
                    string dirPath = Path.Combine(savePath, datePath);
                    if (!Directory.Exists(dirPath)) Directory.CreateDirectory(dirPath);
                    string fileName = $"{stationIndex}_{stationConfig.DeviceName}_{timestamp.ToString("yyyy-MM-dd")}.csv";
                    fullPath = Path.Combine(dirPath, fileName);
                }

                StringBuilder sb = new StringBuilder();
                if (!File.Exists(fullPath))
                {
                    if (isSingleLine)
                    {
                        //将所有螺丝的锁付结果一行显示，列名格式：时间,产品主SN,CT,工位编号,工位名称,配方名称,配方编号,螺丝编号1,锁付结果1,锁付圈数1,锁付扭矩1,锁付时长1,电批程序编号1,结果详情1,压力值1,扭矩上限1,扭矩下限1,圈数上限1,圈数下限1,电批锁付速度1,锁附X1,锁附Y1,开始位置Z1,结束位置Z1,锁附下降速度1,螺丝供料器编号,...(依次类推直到螺丝编号n)
                        sb.Append("时间,产品主SN,CT,工位编号,工位名称,配方名称,配方编号,");
                        for (int i = 0; i < lockResults.Count; i++)
                        {
                            sb.Append($"螺丝编号{i + 1},锁付结果{i + 1},锁付圈数{i + 1},锁付扭矩{i + 1},锁付时长{i + 1},电批程序编号{i + 1},结果详情{i + 1},压力值{i + 1}," +
                                $"扭矩上限{i + 1},扭矩下限{i + 1},圈数上限{i + 1},圈数下限{i + 1},电批锁付速度{i + 1},锁附X{i + 1},锁附Y{i + 1},开始位置Z{i + 1},结束位置Z{i + 1},锁附下降速度{i + 1},螺丝供料器编号{i + 1},");
                        }
                        sb.Append("吸嘴编号,披头编号,操作员姓名");
                    }
                    else
                    {
                        sb.Append("时间,产品主SN,CT,工位编号,工位名称,配方名称,配方编号,螺丝编号,锁付结果,锁付圈数,锁付扭矩,锁付时长,电批程序编号,结果详情,压力值," +
                        "扭矩上限,扭矩下限,圈数上限,圈数下限,电批锁付速度,锁附X,锁附Y,开始位置Z,结束位置Z,锁附下降速度,螺丝供料器编号,吸嘴编号,披头编号,操作员姓名");
                    }
                    sb.AppendLine();
                }

                if (isSingleLine)
                {
                    //将所有螺丝的锁付结果一行显示，列名格式：时间,产品主SN,CT,工位编号,工位名称,配方名称,配方编号,螺丝编号1,锁付结果1,锁付圈数1,锁付扭矩1,锁付时长1,电批程序编号1,结果详情1,压力值1,扭矩上限1,扭矩下限1,圈数上限1,圈数下限1,电批锁付速度1,锁附X1,锁附Y1,开始位置Z1,结束位置Z1,锁附下降速度1,螺丝供料器编号,...(依次类推直到螺丝编号n)
                    sb.Append($"{timestamp:yyyy-MM-dd HH:mm:ss},{productMainSN},{Math.Round(ct, 3)},{stationIndex},{stationConfig.DeviceName},{lockResults[0].ProductName},{lockResults[0].ProductNumber},");
                    for (int i = 0; i < lockResults.Count; i++)
                    {
                        var item = lockResults[i];
                        sb.Append($"螺丝{i + 1},{item.LockPassed},{item.LockTurns},{item.LockTorque},{item.LockDuration},{item.ScrewdriverProgramNumber}," +
                            $"{item.ResultDetails},{item.Pressure},{item.TargetTorqueUpperLimit},{item.TargetTorqueLowerLimit},{item.TargetTurnsUpperLimit},{item.TargetTurnsLowerLimit},{item.TargetLockSpeed}," +
                            $"{item.PositionX},{item.PositionY},{item.StartPositionZ},{item.EndPositionZ},{item.LockDescentSpeed},{item.FeederNumber},");
                    }
                    sb.Append($"{lockResults[lockResults.Count - 1].NozzleNumber},{lockResults[lockResults.Count - 1].HeadNumber},{lockResults[lockResults.Count - 1].OperatorName}");
                    sb.AppendLine();
                }
                else
                {
                    foreach (var item in lockResults)
                    {
                        sb.Append($"{timestamp:yyyy-MM-dd HH:mm:ss},{productMainSN},{Math.Round(ct, 3)},{stationIndex},{stationConfig.DeviceName},{item.ProductName},{item.ProductNumber},{item.Number},{item.LockPassed},{item.LockTurns},{item.LockTorque},{item.LockDuration},{item.ScrewdriverProgramNumber}," +
                            $"{item.ResultDetails},{item.Pressure},{item.TargetTorqueUpperLimit},{item.TargetTorqueLowerLimit},{item.TargetTurnsUpperLimit},{item.TargetTurnsLowerLimit},{item.TargetLockSpeed}," +
                            $"{item.PositionX},{item.PositionY},{item.StartPositionZ},{item.EndPositionZ},{item.LockDescentSpeed},{item.FeederNumber},{item.NozzleNumber},{item.HeadNumber},");
                        sb.AppendLine();
                    }
                }


                // 使用 StreamWriter 以追加模式打开文件
                StreamWriter sw = new StreamWriter(fullPath, true, Encoding.UTF8);
                sw.Write(sb.ToString());
                sw.Close();
                sw.Dispose();

                return true;
            }
            catch (Exception ex)
            {
                if (!isFirstEnter)
                    return false;
                LogHelper.WriteLogError("记录锁付结果时出错!", ex);

                //我希望在这里生成一个临时文件来保存这次的记录，因为如果本地文件被打开时可能会导致无法写入，如果不保存的话可能会丢失这次的记录，所以我想在这里生成一个临时文件来保存这次的记录
                //生成临时文件的路径，格式为savePath\yyyy-MM\工位编号_yyyy-MM-dd_temp\工位编号_yyyy-MM-dd_HH-mm-ss-fff_temp.csv
                string datePath = timestamp.ToString("yyyy-MM") + "\\";
                string tempDirPath = Path.Combine(savePath, datePath, $"{stationIndex}_{timestamp.ToString("yyyy-MM-dd")}_temp");
                string tempFileName = $"{stationIndex}_{timestamp.ToString("yyyy-MM-dd_HH-mm-ss-fff")}_temp.csv";
                RecordLockResult(stationIndex, lockResults, productMainSN, ct, timestamp, tempFileName, isSingleLine, false);

                return false;
            }
        }

        /// <summary>
        /// 记录其他工位的结果，其他工位要存储的数据项按照键值对集合的形式传入，键为数据项名称，值为数据项的值
        /// </summary>
        /// <param name="stationIndex"></param>
        /// <param name="dataItems"></param>
        /// <param name="productMainSN"></param>
        /// <param name="ct"></param>
        /// <param name="timestamp"></param>
        /// <param name="savePath"></param>
        /// <param name="isFirstEnter"></param>
        /// <returns></returns>
        private bool RecordOtherStationResult(int stationIndex, Dictionary<string, string> dataItems, string productMainSN, double ct, DateTime timestamp, string savePath, bool isFirstEnter = true)
        {
            try
            {
                //获取当前工位的配置
                var stationConfig = _configService.GetDeviceInfo(stationIndex);
                if (stationConfig == null) return false;
                // 获取当前产品
                var currentProduct = _productService.GetCurrentProduct();
                if (currentProduct == null)
                {
                    return false;
                }
                //如果保存路径为空，则不保存
                if (string.IsNullOrEmpty(savePath)) return false;
                string fullPath = savePath;
                //如果保存路径是一个文件路径，则直接保存，否则按照工位和日期进行保存
                if (File.Exists(savePath) || Path.HasExtension(savePath))
                {
                    fullPath = savePath;
                    //如果路径不存在，则创建
                    // 创建目录
                    string directory = Path.GetDirectoryName(fullPath);
                    if (!string.IsNullOrEmpty(directory) && !Directory.Exists(directory))
                    {
                        Directory.CreateDirectory(directory);
                    }
                }
                else
                {
                    //结果保存至CSV文件，文件名格式：savePath\yyyy-MM\工位编号_工位名称_yyyy-MM-dd.csv
                    string datePath = timestamp.ToString("yyyy-MM") + "\\";
                    string dirPath = Path.Combine(savePath, datePath);
                    if (!Directory.Exists(dirPath)) Directory.CreateDirectory(dirPath);
                    string fileName = $"{stationIndex}_{stationConfig.DeviceName}_{timestamp.ToString("yyyy-MM-dd")}.csv";
                    fullPath = Path.Combine(dirPath, fileName);
                }
                StringBuilder sb = new StringBuilder();
                if (!File.Exists(fullPath))
                {
                    sb.Append("时间,产品主SN,CT,工位编号,工位名称,配方名称,配方编号,");
                    foreach (var item in dataItems)
                    {
                        sb.Append($"{item.Key},");
                    }
                    sb.AppendLine();
                }
                sb.Append($"{timestamp:yyyy-MM-dd HH:mm:ss},{productMainSN},{Math.Round(ct, 3)},{stationIndex},{stationConfig.DeviceName},{currentProduct.Name},{currentProduct.NumberCode},");
                foreach (var item in dataItems)
                {
                    sb.Append($"{item.Value},");
                }
                sb.AppendLine();
                // 使用 StreamWriter 以追加模式打开文件
                StreamWriter sw = new StreamWriter(fullPath, true, Encoding.UTF8);
                sw.Write(sb.ToString());
                sw.Close();
                sw.Dispose();
                return true;
            }
            catch (Exception ex)
            {
                if (!isFirstEnter)
                {
                    return false;
                }
                LogHelper.WriteLogError("记录其他工位结果时出错!", ex);
                //我希望在这里生成一个临时文件来保存这次的记录，因为如果本地文件被打开时可能会导致无法写入，如果不保存的话可能会丢失这次的记录，所以我想在这里生成一个临时文件来保存这次的记录
                //生成临时文件的路径，格式为savePath\yyyy-MM\工位编号_yyyy-MM-dd_temp\工位编号_yyyy-MM-dd_HH-mm-ss-fff_temp.csv
                string datePath = timestamp.ToString("yyyy-MM") + "\\";
                string tempDirPath = Path.Combine(savePath, datePath, $"{stationIndex}_{timestamp.ToString("yyyy-MM-dd")}_temp");
                string tempFileName = $"{stationIndex}_{timestamp.ToString("yyyy-MM-dd_HH-mm-ss-fff")}_temp.csv";
                RecordOtherStationResult(stationIndex, dataItems, productMainSN, ct, timestamp, tempFileName, false);
                return false;
            }
        }

        /// <summary>
        /// 记录工位的结果，其他工位要存储的数据项按照键值对集合的形式传入，键为数据项名称，值为数据项的值
        /// </summary>
        /// <param name="stationIndex"></param>
        /// <param name="dfcs"></param>
        /// <param name="productMainSN"></param>
        /// <param name="ct"></param>
        /// <param name="timestamp"></param>
        /// <param name="savePath"></param>
        /// <param name="isFirstEnter"></param>
        /// <returns></returns>
        private bool RecordStationResult(int stationIndex, IEnumerable<DataFormCtq> dfcs, string productMainSN, double ct, DateTime timestamp, string savePath, bool isFirstEnter = true)
        {
            try
            {
                //获取当前工位的配置
                var stationConfig = _configService.GetDeviceInfo(stationIndex);
                if (stationConfig == null) return false;
                //如果保存路径为空，则不保存
                if (string.IsNullOrEmpty(savePath)) return false;
                string fullPath = savePath;
                //如果保存路径是一个文件路径，则直接保存，否则按照工位和日期进行保存
                if (!File.Exists(savePath) || !Path.HasExtension(savePath))
                {
                    fullPath = savePath;
                    //如果路径不存在，则创建
                    // 创建目录
                    string directory = Path.GetDirectoryName(fullPath);
                    if (!string.IsNullOrEmpty(directory) && !Directory.Exists(directory))
                    {
                        Directory.CreateDirectory(directory);
                    }
                }

                //结果保存至CSV文件，文件名格式：savePath\yyyy-MM\工位编号_工位名称_yyyy-MM-dd.csv
                string datePath = timestamp.ToString("yyyy-MM") + "\\";
                string dirPath = Path.Combine(savePath, datePath);
                if (!Directory.Exists(dirPath)) Directory.CreateDirectory(dirPath);
                string fileName = $"{stationIndex}_{stationConfig.DeviceName}_{timestamp.ToString("yyyy-MM-dd")}.csv";
                fullPath = Path.Combine(dirPath, fileName);

                StringBuilder sb = new StringBuilder();
                if (!File.Exists(fullPath))
                {
                    sb.Append("PPID,Screw_Number,PROCESS_NAME,PROCESS_START_TIME,CTQ_NAME,CTQ_VALUE,CTQ_LSL,CTQ_USL,PROCESS_END_TIME,SUPPLIER_NAME,COMMODITY_TYPE,REVISION,WO#,MFG_LOT#," +
                        "MFG_ASSY_LINE,PROCESS_OUTCOME,PROCESS_MACHINE_ID,CTQ_UNIT_OF_MEASURE,ERROR_MESSAGE,PD_ATTR_01,PD_ATTR_02,PD_ATTR_03,PD_ATTR_04,PD_ATTR_05");
                    sb.AppendLine();
                }
                if (dfcs == null || dfcs.Count() == 0)
                {
                    return false;
                }
                foreach (var dfc in dfcs)
                {
                    sb.Append($"{dfc.PPID},{dfc.ScrewNum},{dfc.PROCESS_NAME},{dfc.PROCESS_START_TIME},{dfc.CTQ_NAME},{dfc.CTQ_VALUE:F3},{dfc.CTQ_LSL:F3},{dfc.CTQ_USL:F3},{dfc.PROCESS_END_TIME},{dfc.SUPPLIER_NAME},{dfc.COMMODITY_TYPE},{dfc.REVISION},{dfc.WO},{dfc.MFG_LOT},{dfc.MFG_ASSY_LINE},{dfc.PROCESS_OUTCOME},{dfc.PROCESS_MACHINE_ID},{dfc.CTQ_UNIT_OF_MEASURE},{dfc.ERROR_MESSAGE},{dfc.PD_ATTR_01},{dfc.PD_ATTR_02},{dfc.PD_ATTR_03},{dfc.PD_ATTR_04},{dfc.PD_ATTR_05}");
                    sb.AppendLine();
                }
                // 使用 StreamWriter 以追加模式打开文件
                StreamWriter sw = new StreamWriter(fullPath, true, Encoding.UTF8);
                sw.Write(sb.ToString());
                sw.Close();
                sw.Dispose();
                return true;
            }
            catch (Exception ex)
            {
                if (!isFirstEnter)
                {
                    return false;
                }
                LogHelper.WriteLogError("记录其他工位结果时出错!", ex);
                //我希望在这里生成一个临时文件来保存这次的记录，因为如果本地文件被打开时可能会导致无法写入，如果不保存的话可能会丢失这次的记录，所以我想在这里生成一个临时文件来保存这次的记录
                //生成临时文件的路径，格式为savePath\yyyy-MM\工位编号_yyyy-MM-dd_temp\工位编号_yyyy-MM-dd_HH-mm-ss-fff_temp.csv
                string datePath = timestamp.ToString("yyyy-MM") + "\\";
                string tempDirPath = Path.Combine(savePath, datePath, $"{stationIndex}_{timestamp.ToString("yyyy-MM-dd")}_temp");
                string tempFileName = $"{stationIndex}_{timestamp.ToString("yyyy-MM-dd_HH-mm-ss-fff")}_temp.csv";
                RecordStationResult(stationIndex, dfcs, productMainSN, ct, timestamp, tempFileName, false);
                return false;
            }
        }
        #endregion

        #region 写log
        TxtFile mesLog = new TxtFile($"D:\\Data\\Mes记录", "");
        public void MesMessage(string msg)
        {
            mesLog.WriteLine("==  " + msg + "\r\n");
        }
        TxtFile infoLog = new TxtFile($"D:\\Data\\运行日志", "");
        public void InfoMessage(string msg)
        {
            infoLog.WriteLine("==  " + msg + "\r\n");
        }
        #endregion

        #region 压缩图片文件夹
        /// <summary>
        /// 压缩文件
        /// </summary>
        /// <param name="sourcePath">原路径</param>
        /// <param name="zipname">压缩后文件的名称</param>
        /// <param name="station">mes中的station</param>
        /// <param name="fixid">mes中的fixtureID</param>
        public async void CompressionImage(string sourcePath, string zipname, string station, string fixid)
        {
            string zipPath = "";
            try
            {
                SendTaskMessage($"开始压缩文件", MessageLevel.Info);
                await Task.Run(() =>
                {
                    zipPath = $"Z:\\{station}\\{fixid}\\{DateTime.Now.ToString("yyyyMMdd")}\\{zipname}.zip";//生成的zip文件路径
                    string path = $"Z:\\{station}\\{fixid}\\{DateTime.Now.ToString("yyyyMMdd")}";
                    if (!Directory.Exists(path))
                    {
                        Directory.CreateDirectory(path);
                    }

                    ZipFile.CreateFromDirectory(sourcePath, zipPath);
                });
            }
            catch (Exception ex)
            {
                LogHelper.WriteLogError($"压缩文件时出错", ex);
            }
        }
        public async void CompressionSingleCsv(string csvFilePath, string zipname, string station, string fixid)
        {
            string zipPath = "";
            try
            {
                SendTaskMessage("开始压缩CSV文件", MessageLevel.Info);
                await Task.Run(() =>
                {
                    if (!File.Exists(csvFilePath))
                    {
                        LogHelper.WriteLogMes($"CSV文件不存在，不压缩：{csvFilePath}");
                        return;
                    }

                    zipPath = $"Z:\\{station}\\{fixid}\\{DateTime.Now.ToString("yyyyMMdd")}\\{zipname}.zip";
                    string path = $"Z:\\{station}\\{fixid}\\{DateTime.Now.ToString("yyyyMMdd")}";

                    if (!Directory.Exists(path))
                    {
                        Directory.CreateDirectory(path);
                    }

                    using (FileStream fs = new FileStream(zipPath, FileMode.Create))
                    {
                        using (ZipArchive archive = new ZipArchive(fs, ZipArchiveMode.Create))
                        {
                            archive.CreateEntryFromFile(csvFilePath, Path.GetFileName(csvFilePath));
                        }
                    }
                });
                SendTaskMessage("CSV文件压缩完成", MessageLevel.Debug);
            }
            catch (Exception ex)
            {
                LogHelper.WriteLogError("压缩CSV文件失败", ex);
            }
        }

        #endregion

        /// <summary>
        /// 后台报警刷新显示（适配PLC结构化变量名Bool点位 OPC版）
        /// 完全沿用你原有循环结构、防抖逻辑、UI报警推送规则
        /// </summary>
        public void SendAlarmToUi(OpcUaClientPLC plc)
        {
            PlcExcelLoad loadData = new PlcExcelLoad();
            loadData.LoadData(6);

            // 增加报警状态缓存，防止循环重复刷屏报警
            Dictionary<string, bool> alarmLastState = new Dictionary<string, bool>();
            foreach (var alarm in loadData.AlaemList)
            {
                alarmLastState.Add(alarm.OpcAddress, true);
            }

            Task.Run(() =>
            {
                while (true)
                {
                    try
                    {
                        Thread.Sleep(50);

                        foreach (var alarm in loadData.AlaemList)
                        {
                            // 调用你封装好的OPC读取Bool方法
                            bool plcState = plc.ReadBoolNode(alarm.OpcAddress);

                            // 上升沿防抖：只有状态从正常→异常(false)变化时，才推送一次报警
                            if (!plcState && alarmLastState[alarm.OpcAddress])
                            {
                                SendTaskMessage($"PLC报警信息:{alarm.Name}", MessageLevel.Error);
                                LogHelper.WriteLogPlcWarn($"PLC报警信息:{alarm.Name}");
                                alarmLastState[alarm.OpcAddress] = false;
                            }
                            // 报警复位：状态恢复正常，重置缓存
                            else if (plcState && !alarmLastState[alarm.OpcAddress])
                            {
                                alarmLastState[alarm.OpcAddress] = true;
                            }
                        }
                    }
                    catch
                    {
                        Thread.Sleep(200);
                    }
                }
            });
        }


        #endregion
    }
}